Last Updated on January 12, 2023 by Jason Nguyen
When it comes to choosing the right bathroom stall, there are a few things you need to take into account. The most common bathroom stall dimensions are typically 6×6 feet or 8×8 feet, but they can vary depending on your specific needs.
In this blog post, we will discuss the different dimensions of bathroom stalls and help you choose the right one for your business!
What is a bathroom stall?
A bathroom stall is an enclosed area that provides privacy for people who need to use the restroom. It typically features a door with a latch and often includes toilet facilities such as a sink, urinal, and toilet.
Bathroom stalls can be found in public restrooms, office buildings, schools, and other public spaces. They are designed to provide users with a sense of privacy and comfort.
Standard bathroom stall dimensions.
The standard dimensions for a single-person bathroom stall are typically 36 inches wide by 60 inches deep (91.4 cm x 152.4 cm).
If the stall is designed for handicap accessibility, then it must be at least 59 inches wide (150 cm).
In many cases, additional space may be needed to accommodate a wheelchair user, so larger dimensions may be required.
The minimum stall door width is 32 inches (81.3 cm). If the stall has a grab bar, the minimum opening width must be 36 inches (91.4 cm).
The height of the stall can range from 48 to 52 inches (121.9 cm to 132.1 cm) depending on the manufacturer’s specifications.
The overhead clearance is typically 76 inches (193 cm). These dimensions are the minimum required by building codes in many jurisdictions, but some bathrooms may have larger stalls for added comfort.
ADA bathroom stall dimensions.
The minimum clear space inside a bathroom stall should be 60 inches (1524 mm) in depth and 56 inches (1422 mm) wide. This clearance needs to extend from the side wall of the stall, including doors, partitions, walls and fixtures.
The minimum floor length for an ADA bathroom stall is 66 inches (1676 mm). The minimum floor width for an ADA bathroom stall is 36 inches (914 mm).
The minimum height of the stall walls should be 54 inches (1372 mm) tall. The toilet seat must be no higher than 17 inches (432 mm) off the ground and not lower than 19 inches (483 mm).
The toilet paper dispenser must have a mounting height between 26 inches (660 mm) and 48 inches (1219 mm).
A grab bar should be at least 42 inches (1067 mm) in length, mounted on the rear wall of the stall.
The minimum distance between the toilet centerline and the side wall or partition should be 16 inches (406 mm).
An accessible lavatory must be provided in the bathroom stall, with a knee clearance of at least 27 inches (686 mm) high, 30 inches (762 mm) wide and 11-25 inches (279-635 mm) deep.
Lastly, the door should have an easy to use latch or handle. The opening force should not exceed five pounds (2.2 kg).
Types of Bathroom Stalls and Their Dimensions
1. Floor-Anchored Bathroom Stalls.
Floor-anchored bathroom stalls offer the most secure and reliable way to mount a stall. These stalls feature metal plates that attach both to the walls and floor, providing superior strength and stability.
The typical floor-anchored bathroom stall dimensions are 54 inches wide by 74 inches deep with a height of 65 inches from the floor. This size is suitable for most standard restrooms, but if your space requires a different size, many manufacturers can accommodate custom orders.
Additionally, floor anchoring allows for the stall to be adjusted in angle or height if needed. For extra stability, some models also include additional metal bracing along the sides and back of the unit.
2. Floor-Mounted Bathroom Stalls.
Floor-mounted bathroom stalls offer the most flexibility in terms of size and design. These stalls are installed directly onto the floor, which allows them to be freestanding and more customizable than wall-mounted models.
The dimensions of a floor-mounted stall will vary depending on its purpose, with larger stalls built for maximum privacy or ADA compliance, while smaller stalls may be ideal for a smaller restroom.
When choosing the proper dimensions for your floor-mounted stall, it’s important to consider the size of the bathroom and its intended use.
Standard minimum depth for accessible stalls is 36 inches, with widths ranging from 32 inches to 60 inches depending on preference and usage needs.
Floor-mounted stalls can also be customized with partition panels and other features, such as grab bars and coat hooks.
3. Ceiling-Hung Bathroom Stalls.
A popular option for many commercial bathrooms, ceiling-hung bathroom stalls provide an efficient and modern look. The greatest benefit of these stalls is the ease of cleaning, as they are hung from the ceiling instead of mounted on the floor.
Additionally, this style of stall increases available floor space, meaning more room for other fixtures like sinks and urinals.
Ceiling-hung stalls come in a variety of sizes, ranging from as small as 48” wide by 54” tall to as large as 60″ wide by 72″ tall. The choice of size depends on the amount of space available in your bathroom and the number of people expected to use it.
Ceiling-hung stalls typically include a U-shaped bracket and mounting plate that attaches to the ceiling, as well as a door panel, latch, and partition wall.
4. Floor-to-Ceiling Bathroom Stalls.
For a standard bathroom stall, the typical dimensions are 48 inches wide by 55 inches deep. The partition height for floor-to-ceiling stalls typically ranges between 72 and 74 inches high. Options with heights up to 81 inches are also available for taller individuals.
Floor-to-ceiling partitions provide maximum privacy and security while allowing natural light to enter through the space above and below.
Additionally, they are more durable than shorter partitions; they provide better acoustic privacy, reducing noise transfer between stalls; and they minimize dust accumulation.
5. Enclosed Bathrooms.
Enclosed bathrooms provide more privacy and can help to create a more comfortable environment. Most enclosed bathroom stalls measure approximately 65 inches in length and from 36 to 40 inches wide.
There should be some additional space (up to 15-20 inches) in between the toilet and wall or partition for proper movement.
The stall door should also be at least 39 inches wide and should have a latch that can be easily reached from inside the stall.
In addition, there should be a minimum of 21 inches between the partition walls and at least 48 inches in front of the toilet for extra room.
Urinal stall dimensions.
The size of a urinal stall is important for proper bathroom design. A good rule of thumb is to make sure the urinal stall has at least 24 inches (610 millimeters) of clearance on all sides.
The ideal size for a urinal stall would be 36 inches (914 millimeters) wide and 48 inches (1219 millimeters) deep.
The height is typically between 30 and 34 inches (762 and 864 millimeters) from the floor to the top of the partition.
Urinal stalls should also have adequate space for a person to enter the stall, turn around, and comfortably use the urinal without having to move around or contort themselves in any way.
Additionally, the stall should include an overhead partition to help provide privacy. There should also be grab bars on both sides of the urinal stall for added safety and stability.
Handicap bathroom stall dimensions.
The Americans with Disabilities Act (ADA) requires all handicap accessible stalls in a public restroom to be at least 60 inches wide and 56 inches deep.
This is significantly larger than the dimensions of standard bathrooms and provide adequate space for someone using a wheelchair or mobility aid to comfortably enter, use and exit the stall.
Additionally, ADA-compliant stalls must have grab bars installed on both sides of the stall and a toilet seat that is at least 17 inches from the floor.
Lastly, the doorway must be wide enough to allow a wheelchair or other mobility aids to fit through easily. These regulations ensure that people with disabilities have adequate space and support when using public restroom stalls.
Public bathroom stall dimensions.
The typical stall found in public restrooms is 36 inches wide and 60 inches deep. This size gives users enough room to comfortably use the toilet, but not so much space that it creates an uncomfortable feeling of visibility.
While there are no strict regulations on how large a stall should be, many facilities choose this standard size for their stalls as a way to provide a comfortable and efficient experience for their customers.
The door of the typical public stall is around 20 inches wide, giving users enough space to enter and exit without feeling cramped. To prevent peeping eyes from outside the stalls, many facilities choose panels that extend close to the floor so users can feel secure in their privacy.
Furthermore, some facilities choose to add a grab bar on the back wall of the stall. This gives users extra stability and support while using the toilet, which can be especially helpful for those with limited mobility or strength.
Ambulatory bathroom stall dimensions.
According to ADA (Americans with Disabilities Act) guidelines, ambulatory bathroom stalls must be a minimum of 5 feet wide and 56 inches deep in order for the wheelchair user to maneuver safely.
The stall door should open outward and have an automatic latch or other system that allows it to remain open when needed.
Additionally, grab bars should be provided on both sides of the stall, with the lower bar being no more than 36 inches above the floor.
The toilet must also be able to accommodate a wheelchair user and should have an elevated seat or transfer seat for easier access. Finally, all surfaces in these stalls must be slip-resistant and easy to clean.
Commercial bathroom stall dimensions.
Bathroom stalls are designed to accommodate a variety of user needs and preferences, so the exact dimensions of bathroom stall can vary widely. In general, however, most commercial bathroom stalls measure between 3 feet and 5 feet wide with a depth of about 4 feet.
The height of a typical bathroom stall is roughly 6 or 7 feet tall. A door is typically included in the stall, and it ranges between 28 inches and 32 inches wide.
The height of the partitions or walls within a bathroom stall can also vary. Most partitions reach up to about 6 feet high for privacy, but there are some that go as low as 4 feet.
Minimum bathroom stall dimensions.
The Americans with Disabilities Act (ADA) requires all public bathrooms to follow certain guidelines for accessible stalls to accommodate individuals with disabilities.
The minimum dimensions of an ADA compliant restroom stall are: 5 feet wide by 5 feet deep, with a door that is at least 32 inches wide. The toilet seat must be 17-19 inches from the floor, and the toilet paper holder must be installed within reach of someone sitting on the toilet.
Additionally, grab bars should be installed on both sides of the stall, at a height between 33-36 inches from the floor. If any wall space is available, it should also have a coat hook provided as well.
How tall are most bathroom stalls?
Standard bathroom stalls are usually 6 feet tall. They are designed to keep the user and those around them comfortable and secure. In some cases, taller stalls may be provided for extra privacy or for people with disabilities.
These can range in height from 7 to 10 feet depending on the space available and the specific needs of the user. For example, a handicap stall may need to be taller, while a small space requires a smaller size.
What are the gaps in bathroom stalls for?
The gap in the stall is designed to provide privacy. It helps reduce any feeling of being watched or judged by other people. This can be especially beneficial for those who have disabilities, as they may require more space and time to complete their tasks.
Additionally, the gap can help keep odors from spreading throughout the bathroom environment, which is important when multiple people are using the area.
It also serves as an airway, allowing air to circulate throughout the bathroom, helping keep it smelling fresh.
Finally, the gap in the stall can help provide a physical barrier between you and other users of the restroom. This helps create a sense of safety and security for everyone in the restroom.
What is the minimum width for a toilet stall?
According to the American Disabilities Act, the minimum width of a toilet stall is 60 inches. This ensures that individuals with disabilities have adequate space and room to maneuver.
To further accommodate people in wheelchairs, there should be an additional 18-inch clearance next to the toilet for side transfers. The door of the stall should also open outwards so that it does not take up additional space inside the stall.
Additionally, any toilet that is higher than 17 inches off the ground should have grab bars installed to provide extra support and stability for those who need it.
How to measure bathroom stall dimensions.
First, decide which dimensions you need to measure in your bathroom stall. Common measurements to take are the width of the stall (from one side wall to the other), the depth of the stall (the distance from the front edge of the door to back wall), and height of walls and door.
To begin measuring, use a measuring tape or ruler. Measure the width of the stall first, by starting at one side wall and measuring to the opposite wall. Record this measurement.
Next, measure the depth of the stall by starting at the corner where door meets frame, and measuring in a straight line to the back wall. Record this measurement as well. Finally, measure any walls and door heights in the stall that you need.
Measuring bathroom stall dimensions is a straightforward process and can help ensure that your space is maximized to its full potential. Make sure to note down all measurements taken, as this will be helpful when shopping for stalls or installing fixtures.
With the proper measurements, you can easily create a functional and aesthetically pleasing space for your home or business.
Conclusion
When deciding on the correct bathroom stall dimensions, it is important to consider the space available and make sure that you are able to meet all relevant codes.
Also, considering the needs of different users can help ensure that everyone feels comfortable and safe in your restroom facilities.
With careful planning, you can create a bathroom environment that meets both safety and aesthetic standards.
By taking the time to properly measure your stall dimensions, you can ensure that both your restroom and its users will be well taken care of.
