Last Updated on August 10, 2022 by Kimberly Crawford
If your Hotpoint refrigerator is not cooling, don’t worry – you’re not alone. This is a common problem that can often be fixed without having to call a technician. In this blog post, we will walk you through the steps that you can take to fix your refrigerator and get it cooling again. We will also provide some tips on how to prevent this problem from happening in the future.
Reasons Why Hotpoint Refrigerator That’s Not Cooling and Solutions
1. Condenser Fan Motor.
If your refrigerator has a condenser fan motor, the most likely cause of your problem is that the fan motor has failed.
The condenser fan motor circulates air over the coils to keep them cool, so if the motor fails, the coils will get too hot and your refrigerator won’t be able to cool properly.
Why does it fail?
The most common reason for a condenser fan motor to fail is because of a buildup of dust and debris.
When this happens, the blades of the fan can’t move as freely, which prevents it from cooling the refrigerator properly.
Another reason for failure is age; over time, the bearings in the motor can wear out, causing it to fail.
How do you fix it?
If your condenser fan motor has failed, you’ll need to replace it. To do this, first, unplug the refrigerator from the wall outlet.
Then, remove the panel on the back of the fridge that covers the condenser coils.
Next, locate the condenser fan motor and unscrew it from its mount. Once the old motor is out, you can install the new one by screwing it into place.
Finally, replace the panel and plug the fridge back in.
2. Condenser Coils.
The condenser coils on your refrigerator are responsible for getting rid of the heat that is generated by the unit.
If these coils are dirty, they will not be able to do their job properly and your fridge will not be able to stay cool.
You can clean the condenser coils yourself with a brush or you can hire a professional to do it for you.
Why does it fail?
The most common reason for a refrigerator to stop cooling is because the condenser coils are dirty.
These coils are located on the back of the fridge, and they help to release heat from the fridge so that it can stay cool.
When they’re covered in dust or dirt, they can’t release heat as effectively, and your fridge will start to warm up.
How do you fix it?
Luckily, cleaning the coils is a pretty easy fix. Just unplug your fridge, and using a brush attachment on your vacuum, gently brush the coils clean.
You can also use a coil cleaning solution to help break down any build-up on the coils. Once they’re clean, plug your fridge back in and it should start cooling properly again.
3. Evaporator Fan Motor.
The evaporator fan motor draws air over the evaporator coils and circulates it through the fridge. If your fridge isn’t cooling, the evaporator fan motor could be to blame.
Why does it fail?
There are a few reasons the evaporator fan motor might fail. The most common is that the bearings have seized up. This can happen because of age or lack of lubrication.
Another possibility is that the winding has come loose, which can happen if the fridge is jostled too much. Lastly, the motor itself could be burned out.
How do you fix it?
If the bearings have seized up, you’ll need to replace the evaporator fan motor.
If the winding has come loose, you can try to reattach it. Be careful not to over-tighten, as this could damage the motor. If the motor is burned out, you’ll need to replace it.
4. Start Relay.
The start relay is a small device located near the compressor. It helps to start the compressor by providing a high voltage to it.
If the start relay is not working properly, then the compressor will not be able to start and your refrigerator will not be able to cool properly.
Why does it fail?
The start relay is one of the most common parts to fail on a refrigerator. The start relay is what provides power to the compressor. If the start relay fails, the compressor will not run.
There are a few reasons why the start relay might fail. One reason is that the coils inside the relay can burn out. Another reason is that the contacts inside the relay can become corroded.
How do you fix it?
If the start relay has failed, you will need to replace it. You can find replacement relays at most appliance parts stores. Be sure to take the old relay with you so that you can get the correct replacement.
5. Thermistor.
If your fridge isn’t cooling, one of the first things you should check is the thermistor. This part controls the temperature in your fridge and if it’s not working properly, it can cause your fridge to stop cooling.
Why does it fail?
The thermistor is a sensor that monitors the temperature inside your fridge. If it senses that the temperature is getting too high, it will send a signal to the control board to turn on the cooling system.
However, if the thermistor itself is faulty, it may not be able to send this signal properly. As a result, your fridge will not be able to properly regulate its temperature, leading to it becoming too warm.
How can you fix it?
If your fridge is not cooling properly, the first thing you should check is the thermistor. You can do this by unplugging your fridge and removing the back panel.
Locate the thermistor and test it with a multimeter. If the reading is not within the correct range, then you will need to replace the thermistor.
Once you have replaced the thermistor, your fridge should be able to properly regulate its temperature once again. However, if the problem persists, there may be an issue with another component of your fridge and you should call a technician for further assistance.
6. Temperature Control Thermostat.
The temperature control thermostat is located in the back of the refrigerator, near the bottom. It controls the compressor and fans.
If the thermostat is defective, the refrigerator will not cool properly. To test the thermostat, use a multimeter to test it for continuity. If there is no continuity, replace the thermostat.
Why does it fail?
Temperature control thermostats are one of the most common refrigerator repairs. They can fail for a number of reasons, but the most common is simply wear and tear.
As the thermostat ages, it becomes less accurate, and eventually it will stop working altogether. If your refrigerator is not cooling properly, it’s a good idea to check the thermostat first.
How to fix it.
If the thermostat is the problem, it’s a relatively easy fix. You’ll just need to replace it with a new one. But before you do that, make sure to check the wiring to see if anything has come loose. If everything looks good there, then go ahead and replace the thermostat.
7. Start Capacitor.
The start capacitor is one of the most important parts of the refrigerator. If the start capacitor is not working, the refrigerator will not cool properly.
The start capacitor is located in the back of the refrigerator, near the compressor. To test the start capacitor, use a multimeter to test for continuity between the positive and negative terminals of the capacitor.
Why does it fail?
One reason a start capacitor may fail is because it’s constantly cycling on and off. This can cause the capacitor to overheat and eventually fail. If your refrigerator is frequently cycling on and off, this could be the problem.
Another reason a start capacitor may fail is because it’s not getting enough power. This can be caused by a weak electrical connection or a problem with the circuit breaker. If your start capacitor is not getting enough power, it will eventually fail.
If your start capacitor has failed, you’ll need to replace it. You can find replacement capacitors at most hardware stores or online. Be sure to get the correct size and voltage for your refrigerator.
How to fix it.
If your Hotpoint refrigerator is not cooling, one possible cause is a faulty start capacitor. The start capacitor gives the compressor an extra boost of power when it first starts up. If the start capacitor is bad, the compressor may not have enough power to start, and your fridge will be warm.
To test the start capacitor, first unplug your fridge. Then, use a multimeter to test the capacitor for continuity. If the capacitor is bad, it will need to be replaced.
Replacing the start capacitor is a pretty easy job that most people can do themselves. Just make sure to buy the correct replacement part for your model of Hotpoint fridge.
Once you’ve replaced the start capacitor, your fridge should be cooling properly again. If it’s still not cooling, there may be another issue at play. Check your owner’s manual for troubleshooting tips, or contact a repair person to diagnose the problem.
8. Temperature Control Board.
The board controls the compressor, fans, and defrost timer. If the board is defective, it may not provide power to the compressor or fans. To test the board, use a multimeter to test it for continuity.
If the board is defective, you will need to replace it. You can find replacement boards online or at an appliance parts store. Be sure to unplug the refrigerator before you begin this repair.
Why does it fail?
There are a few reasons why your Hotpoint refrigerator’s temperature control board might fail. The most common reason is because of a power surge or power outage. This can cause the circuit breaker to trip, which will prevent the fridge from cooling properly.
Another reason could be that the compressor or condenser fan is not working properly. If this happens, the fridge will not be able to circulate the cold air properly and will not cool down.
Lastly, the temperature control board could simply be faulty. If this is the case, you will need to replace it with a new one.
What are the symptoms?
If your Hotpoint refrigerator’s temperature control board has failed, there are a few symptoms that you will notice. The most obvious symptom is that the fridge will not be cooling properly.
The fridge may also make strange noises or the lights may flicker. If you notice any of these symptoms, it is best to call a refrigerator repair technician to come and take a look at your fridge.
How do I fix it?
There are a few things that you can do to fix a Hotpoint refrigerator that’s not cooling. One thing that you can try is to reset the temperature control board.
To do this, first unplug the refrigerator from the power outlet. Then, remove the screws that hold the control board in place and take it out of the fridge.
Next, find the reset button on the board and press it. Once the board has been reset, put it back in the fridge and plug it back in.
Another thing that you can try is to clean the evaporator coils. To do this, first unplug the fridge and then remove everything from inside of it. Next, locate the coils and use a brush to clean them. Once the coils are clean, put everything back in the fridge and plug it back in.
9. Thermistor.
The thermistor is a sensor that measures the temperature inside the fridge. If it’s not working properly, it can cause the fridge to stop cooling.
Why does it fail?
The most common reason for a fridge thermistor to fail is because of age or wear and tear. Over time, the wires inside the thermistor can break down, causing it to stop working correctly.
Another reason why a fridge thermistor might fail is if it gets damaged by something else in the fridge, like a piece of food or a can of soda.
If your fridge thermistor is failing, there are a few things you can do to try and fix it. First, check the wires leading to the thermistor to make sure they’re not damaged or loose.
If they look okay, then you can try replacing the thermistor itself. This is usually a pretty easy fix, and you can find replacement thermistors at most hardware stores.
10. Compressor.
The compressor is the part of your refrigerator that circulates refrigerant and helps to cool your food.
Why does it fail?
There are a few reasons why your compressor might fail. The most common reason is lack of maintenance.
If you don’t keep the coils clean, they can get clogged with dust and dirt. This reduces the airflow and prevents the compressor from working properly.
Another common reason for failure is a faulty start relay. This part controls the electrical current to the compressor. If it fails, the compressor won’t start.
How to fix it.
If your Hotpoint refrigerator is not cooling, you may need to replace the compressor. This can be a difficult and expensive repair, but it’s worth it to keep your fridge running properly. Here’s how to do it:
First, you’ll need to purchase a new compressor. You can find these at most hardware stores or online.
Next, you’ll need to remove the old compressor. This can be a tricky process, so it’s best to consult a professional if you’re not comfortable doing it yourself.
Once the old compressor is out, you’ll need to install the new one. Again, this is a difficult process, so it’s best to consult a professional if you’re not comfortable doing it yourself.
Once the new compressor is installed, your Hotpoint refrigerator should be back to running properly.
11. Main Control Board.
The main control board is the brains of the refrigerator. If it is not working properly, the fridge will not cool correctly.
Why does it fail?
The main control board is the most common cause of a Hotpoint refrigerator not cooling. It regulates the power supply to the compressor and controls the temperature within the fridge.
If this part fails, it can cause the fridge to become too cold or not cold enough.
How do you fix it?
To test the main control board, first unplug the fridge and then remove the board. Next, check for any burnt out or damaged components. If you find any, replace them with new ones.
Finally, reassemble the fridge and plug it back in. If the problem persists, then you may need to replace the main control board.
Related:
- Frigidaire Side by Side Refrigerator Not Cooling? How to Fix It
- Frigidaire Refrigerator Not Cooling? 6 Reasons Why and How to Fix Them
- 8 Reasons for GE Refrigerator Not Cooling and {How To Fix}
- 10 Reasons For Whirlpool Refrigerator Not Cooling and {How To Fix}
Hotpoint side by side refrigerator freezer not cooling.
If your Hotpoint side by side refrigerator freezer is not cooling properly, there are a few things you can do to try and fix the problem.
First, check to make sure that the fridge is set to the correct temperature. If it is, then try cleaning the coils.
Dust and dirt can build up on the coils and prevent them from doing their job. If that doesn’t work, you may need to replace the coils.
Finally, if all else fails, you can try replacing the entire fridge.
Hotpoint refrigerator CSX22GR not cooling.
If your Hotpoint refrigerator isn’t cooling, you may need to check a few things before calling a repairman.
The first thing you should do is make sure that the power cord is plugged in correctly.
Next, check to see if the fridge is set to the correct temperature. If neither of these things seem to be the problem, then it’s possible that the fridge is not getting enough power. You can check this by making sure that the circuit breaker is turned on or by checking for a blown fuse.
If you still can’t figure out why your Hotpoint refrigerator CSX22GR not cooling, then you may need to call a repairman.
Hotpoint FF7190EP fridge not cooling.
The fridge is a bit old but it has been working fine until now. The fridge has been turned off for about 24 hours and when I turned it back on, the interior light came on but the fridge wasn’t cooling. I tried resetting the thermostat but that didn’t work. Is there anything else I can try?
If your Hotpoint FF71 fridge is not cooling, there are several things that could be causing the problem. First, check to make sure that the power cord is plugged into an outlet and that the fridge is turned on.
If the fridge is on but still not cooling, it may need to be reset. To do this, unplug the fridge for 30 seconds and then plug it back in.
If the fridge still isn’t cooling, the problem may be with the thermostat. Try adjusting the thermostat to a colder setting and see if that does the trick. If none of these solutions work, you may need to call a repairman.
Hotpoint SMX95TU fridge not cooling.
There are a few things that could be causing your Hotpoint SMX95TU fridge to stop cooling, and the most likely culprit is a problem with the compressor.
If the compressor isn’t running, then the fridge can’t cool down. Another possibility is that the fridge isn’t getting power, so check to make sure the cord is plugged in and that the outlet has power.
Why is my Hotpoint fridge warm?
There are a few reasons why your Hotpoint fridge might be warm. The most common reason is that the fridge isn’t set to the correct temperature.
If the fridge is too warm, it can cause food to spoil. There are a few other potential reasons for a warm fridge, so it’s best to consult your owner’s manual or contact a Hotpoint customer service representative for more help.
Where are the coils on a Hotpoint refrigerator?
The coils are located at the back of the fridge, behind the panel. To access them, you’ll need to remove the panel. There are usually four screws that hold it in place. Once the panel is off, you’ll see the coils. They may be covered with dust, so you’ll want to clean them before putting everything back together.
What number should Hotpoint fridge be on?
This is a question that many people have, but the answer may vary depending on your specific model. Check your user manual for the recommended setting for your fridge. Generally speaking, though, most Hotpoint fridges should be set to between 0 and +20 degrees Celsius. This will ensure that your food stays fresh and safe to eat.
Conclusion
If your Hotpoint refrigerator is not cooling properly, there are a few things you can do to try and fix the problem. First, check the temperature setting and make sure it is set to the correct level.
If the fridge is still not cooling properly, then clean the condenser coils and evaporator fan. You may also need to replace the air filter. If you have tried all of these things and the fridge still isn’t cooling, then you may need to call a repairman. Thanks for reading! We hope this helped solve your problem.