How to Change a Water Filter in a Whirlpool French Door Refrigerator

Last Updated on June 6, 2022 by Kimberly Crawford

If you have a Whirlpool French Door refrigerator, then you know how important it is to keep the water filter changed. If not, your refrigerator may start displaying an error message telling you to change the filter. Not only is it important to keep the refrigerator running properly, but changing the water filter also helps keep your drinking water clean and fresh.

In this blog post, we will walk you through the process of changing the water filter in a Whirlpool French Door refrigerator.

Step by step on how to change a water filter in a Whirlpool French door refrigerator

Remove the screws from the cover plate on the inside of the refrigerator to access the water filter.
Change out the old water filter with a new one.
Reset the water filter by pressing the button on the inside of the fridge if necessary.
Turn off the filter light by replacing or resetting the water filter if necessary.
Replace the cover plate and screws.

In this article

Where is the water filter on a Whirlpool french door refrigerator?

The water filter is located on the inside of the refrigerator, in the top right corner. You will need to remove two screws from the cover plate to access it.

How often should I change my air filter in the Whirlpool french door refrigerator?

If you are using a Whirlpool french door refrigerator, it is recommended that you change the air filter every six months. This will help keep your drinking water clean and fresh and improve the quality of life in your home. If not changed regularly, dust particles could build up inside of your refrigerator causing mold to grow on food items such as lettuce.

How do I know if my whirlpool french door refrigerator needs a new air filter?

If you are not sure whether or not your Whirlpool french door refrigerator needs a new air filter, the best way to find out is to check the owner’s manual. The owner’s manual will tell you how often the filter should be changed and what type of filter to use. You can also look for an indicator light on the control panel of your refrigerator. If this light is on, it means the filter needs to be changed.

How do I change my water filter in Whirlpool French door refrigerator?

Open the refrigerator door and locate the filter cover. Most Whirlpool French door refrigerators have a water filter compartment located in one of the top corners of the fridge. The compartment is typically covered with a small, hinged flip-up or pull-down door. To open it, lift up on this flap to reveal an access panel to the water filter.

If you can’t find the water filter compartment, look for a small door on the inside wall of the fridge that opens up to reveal the filter. This is usually located at the top of the refrigerator.

Once you’ve found it, remove the old water filter by gently pulling it out of the compartment.

Take a moment to inspect the old water filter. If it’s dirty or clogged, you may want to consider replacing it with a new one.

Next, insert the new water filter into the compartment by gently pushing it into place. Make sure that the arrow on top of the filter is pointing in the direction of the water flow.

Replace the filter cover and make sure it’s securely attached.

Now you can turn on the refrigerator and check for leaks. Look behind and below the fridge for any water puddles. If you find any, shut off the water supply to the fridge and call a plumber. Otherwise, enjoy fresh-tasting water and ice!

If you need to replace the filter again in six months or so, repeat these steps to remove it from its compartment.

Where can I buy a Whirlpool french door refrigerator air filter?

If you need to buy a replacement air filter for your Whirlpool french door refrigerator, you can do so at most major retail stores. The filters are usually sold in packs of two or three and the prices vary depending on the store. You can also purchase them online from various retailers.

FAQs

How long does the Whirlpool french door refrigerator air filter last?

The Whirlpool french door refrigerator air filter should last up to six months before needing replacement. After this time, you will want to change it out with a new one. If your fridge is making strange noises or has an odor coming from the back of it, then these are signs that the filter may need replacing sooner than expected.

Do you have to shut off water to change fridge filter?

No, you do not have to shut off the water to change the fridge filter. Shutting off the water will only make it more difficult to complete the task at hand.

Where is the water filter reset button on the Whirlpool french door refrigerator?

The water filter reset button is located on the inside of the refrigerator, in the top right corner. You will need to remove two screws from the cover plate to access it. If the water filter needs to be reset, you can do so by pressing this button.

How do you turn off the filter light on a Whirlpool french door refrigerator?

If the filter light on your Whirlpool french door refrigerator is on, it means that the water filter needs to be replaced. To turn off this light, you will need to replace the water filter. Once the new water filter is installed, the light should turn off automatically. If it does not, you can reset it by pressing the button on the inside of the refrigerator.

Related:

Conclusion

Changing the water filter in your French door refrigerator is a simple process that only takes a few minutes. Make sure to follow the instructions provided in this blog post so you can complete the task quickly and easily. You will be able to enjoy clean, fresh water for months to come with a new water filter.