Frigidaire Side by Side Refrigerator Not Cooling? How to Fix It

Last Updated on August 10, 2022 by Kimberly Crawford

A Frigidaire side by side refrigerator not cooling can be a real inconvenience. If your fridge isn’t keeping things cold, you might start to worry about the food inside. But don’t panic just yet!

There are a few things you can do to try and fix the problem before calling in a repairman. In this blog post, we will walk you through some of the most common causes of this issue and how to fix them. Keep reading for more information!

In this article

Reasons Why Frigidaire Side by Side Refrigerator Not Cooling

1. Dirty condenser coil.

The condenser coils are responsible for helping to cool the fridge down, so if they are covered in dirt and dust, it can impede their ability to do their job.

To clean your condenser coils, simply unplug your fridge and vacuum them with a brush attachment. Once you’ve done that, wipe them down with a damp cloth to remove any remaining dirt and debris.

2. Faulty evaporator fan motor.

The evaporator fan helps circulate the air inside the fridge, so if it isn’t working properly, it can cause the fridge to become too warm.

To test whether or not your evaporator fan motor is faulty, simply unplug your fridge and open up the freezer door. If you don’t feel any air coming out of the vents, then the fan motor is likely the culprit.

3. Temperature Control Thermostat.

If your refrigerator is not cooling, one of the first things you should check is the temperature control thermostat. This thermostat controls the compressor and fans.

If it is set too low, the compressor will not run. To test it, set the thermostat to a higher setting for 24 hours and see if the refrigerator starts cooling. If it does, then you know the thermostat was the problem.

4. Condenser Fan Motor.

This part helps circulate air around the condenser coils so that they can stay cool and do their job properly. If this motor isn’t working correctly, it could be causing your fridge to overheat and not cool properly.

There are a few signs that you can look for to see if your condenser fan motor is going bad. One of the most common is if your fridge starts making strange noises.

If you hear a rattling, humming, or buzzing noise coming from the back of your fridge, it’s likely that the condenser fan motor is starting to fail.

Another sign is if your fridge isn’t cooling evenly. If you notice that one side of your fridge is much warmer than the other, it’s possible that the condenser fan motor is only working on one side.

5. Start Relay.

The start relay is responsible for supplying power to the compressor. If the start relay is defective, the compressor will not run. To test the start relay, first unplug the refrigerator and then remove the cover of the Start Relay.

There are usually four wires connected to the Start Relay. Using a multimeter, test for continuity between the two outside terminals.

There should be continuity when the refrigerator is unplugged. If there is no continuity, the start relay is defective and needs to be replaced.

6. Faulty Start Capacitor.

The start capacitor gives the compressor a boost of energy when it starts up, and if it’s not working properly, the compressor may not be able to maintain proper pressure.

To test the start capacitor, use a multimeter to check for continuity between the terminals. If the reading is infinite, the capacitor is faulty and needs to be replaced.

7. Temperature Control Board.

This part controls the compressor and fans, and if it’s defective, your fridge won’t cool correctly.

You can test the temperature control board by using a multimeter to test continuity through the board. If there is no continuity, then you will need to replace the temperature control board.

8. Thermistor.

The thermistor is a sensor that tells the fridge how warm or cool the air inside it is. If it’s not working properly, it can cause your fridge to not cool properly.

To check if the thermistor is the problem, first unplug your fridge and then remove the back panel. Locate the thermistor and check to see if it is loose or damaged. If it is, you will need to replace it.

9. Main Control Board.

If your Frigidaire refrigerator model number starts with 25, the main control board could be the problem. The main control board controls most of the refrigerator’s functions, such as cooling and defrosting.

If it’s not working properly, your fridge won’t cool properly. To test the main control board, you’ll need a multimeter.

First, unplug the fridge and remove the control board cover. You’ll see several wires going to the control board. Locate the two white wires and test for continuity between them. If there is no continuity, replace the main control board. If there is continuity, check the thermostat next.

How to reset a Frigidaire side by side refrigerator

If your Frigidaire side by side refrigerator is not working properly, you may need to reset it. To do this, first unplug the refrigerator from the power outlet. Then, remove the food and shelves from the fridge.

Next, locate the reset button on the back of the fridge. Press and hold this button for about 30 seconds. After this, plug the refrigerator back into the power outlet and wait for it to restart.

Finally, put the food and shelves back into the fridge. Your Frigidaire side by side refrigerator should now be reset and working properly.

Frigidaire side by side refrigerator not cooling but freezer is working.

The refrigerator is not cooling but the freezer is working. The fridge is not cold but the freezer is working. What could be the problem?

There are a few things that could be causing your Frigidaire side by side refrigerator to not cool properly, even though the freezer seems to be working fine. One possibility is that the fridge isn’t getting enough power.

Make sure that the fridge is plugged in all the way and that the outlet it’s plugged into is working. Another possibility is that the fridge isn’t set to the correct temperature. Check the settings and make sure it’s turned down low enough.

If neither of those solutions work, then there could be a problem with the fridge itself and you’ll need to call a repairman. Hopefully, it’s something simple and easily fixable! In the meantime, you can try putting ice packs in the fridge to help keep things cool.

Conclusion

If your Frigidaire side by side refrigerator is not cooling, there are a few things you can do to troubleshoot the issue. First, check to see if the fridge is set to the correct temperature. If it is, then the next thing to check is the condenser coils.

These coils need to be clear of debris in order for the fridge to work properly. If they are dirty, clean them with a brush or vacuum.

Finally, check the door seal to make sure it is tight and not letting any cold air out.

If you have tried all of these things and your fridge still isn’t cooling, then you may need to call a repairman.

Thanks for reading! We hope this was helpful.