Last Updated on August 11, 2022 by Kimberly Crawford
If your Maytag refrigerator isn’t cooling, don’t worry – you’re not alone. This is a common problem that many people experience with their refrigerators.
In this blog post, we will discuss some of the most common causes of this issue and provide tips on how to fix it. We will also provide information on how to get in touch with Maytag customer service if you need assistance.
Related: 7 Refrigerator Brands To Avoid and 5 Most Reliable Brands
Reasons Why Maytag Refrigerator Not Cooling?
1. Condenser Coils.
The condenser coils are located on the back of your fridge. If they’re covered in dust or dirt, your fridge won’t be able to properly cool down.
Clean the coils with a coil brush (you can find these at most hardware stores) and vacuum up any dust or dirt that’s been dislodged.
Why does it fail?
The coils can become so clogged with dust and dirt that the fridge can’t expel enough heat.
This causes your fridge to work harder and run longer in an attempt to cool down, which raises your energy bill.
How to fix it?
You can clean the coils yourself with a coil brush. Simply unplug your fridge, and using the brush, sweep away any dirt and debris from the coils.
Vacuum up any dirt that has fallen off of the coils. If you have a hard time reaching the coils, you can hire a professional to do it for you.
2. Condenser Fan Motor.
The condenser fan motor draws air through the condenser coils and over the compressor. If the condenser fan motor is not working, the fridge will not cool.
To test the condenser fan motor, first make sure that there is power going to it. Next, check to see if the blades are turning freely.
If they are not, then the motor will need to be replaced. If the blades are turning freely, then the motor is probably fine and you will need to check other components to see why the fridge is not cooling.
Why does it fail?
There are a few reasons why your condenser fan motor might fail.
The most common reason is that the bearings in the motor have failed. This can happen because of dirt, lack of lubrication, or age.
Another reason might be that the blades on the fan are damaged or bent, which prevents them from moving properly.
How to fix it?
If the reason for your condenser fan motor failure is dirty bearings, you can try cleaning them with a brush or vacuum.
If they are damaged beyond repair, you will need to replace the entire motor. If the blades are bent or damaged, you can try straightening them with a pair of pliers. If they are too far gone, you will need to replace the entire fan assembly.
3. Evaporator Fan Motor.
This part circulates air over the evaporator coils to help remove heat from the fridge. To test if this part is working, first make sure that the fridge is unplugged.
Then, remove the back panel of the fridge to access the evaporator coils. If the coils are iced over, then the evaporator fan motor is likely not working.
To test the motor, use a multimeter to check for continuity through the wires. If there is no continuity, then the evaporator fan motor will need to be replaced.
Why does it fail?
The evaporator fan motor is responsible for circulating air throughout the refrigerator. If this component fails, the air will not be circulated and the refrigerator will not cool properly.
This is typically caused by a failed bearings or a seized up motor. Replacing the evaporator fan motor is typically a fairly simple repair that can be completed by most do-it-yourselfers.
4. Start Relay.
The start relay is one of the most important parts of your refrigerator. If your fridge is not cooling, it may be because the start relay is not working.
Why does it fail?
There are a few reasons why your Maytag refrigerator’s start relay might fail. The most common reason is age and wear and tear.
Over time, the electrical contacts inside the start relay can become corroded or damaged, making it difficult for the current to flow through them properly.
Another common reason for failure is dirt and dust build-up inside the start relay. This can insulate the electrical contacts and prevent them from working properly.
How to fix it?
If your refrigerator’s start relay is not working properly, you can try cleaning it.
First, remove the start relay from the refrigerator.
Next, use a can of compressed air to blow out any dirt or dust that has accumulated inside.
Finally, reattach the start relay and see if it is now working properly. If not, you may need to replace it.
If your start relay is not working, you may need to replace it. You can purchase a replacement start relay from Maytag or from an authorized Maytag dealer. Be sure to unplug your refrigerator before attempting any repairs.
If your fridge is still not cooling after replacing the start relay, it may be because the compressor is not working.
5. Temperature Control Thermostat.
The thermostat is located in the control panel of the refrigerator. If the refrigerator is not cooling, the first thing you should check is the setting of the thermostat.
The thermostat should be set to a colder setting. If the thermostat is set to a warmer setting, the compressor will not run as often and the refrigerator will not be as cold.
Why does it fail?
The most common reason for a refrigerator not cooling is a problem with the temperature control thermostat. This part controls the temperature inside the fridge, and if it’s not working properly, your food won’t stay cold.
If your Maytag fridge isn’t cooling properly, there are a few things you can do to try and fix the issue. First, check and make sure that the temperature control thermostat is set to the correct setting. If it’s not, adjust it and see if that fixes the problem.
6. Start Capacitor.
This part gives the compressor a boost of power when it first turns on. If it’s damaged or defective, it can cause the fridge to not cool properly.
Why does it fail?
The most common reason for a start capacitor to fail is age and heat. Over time, the electrolyte in the capacitor dries out and loses its ability to hold a charge. The heat generated by the compressor can also cause the capacitor to fail.
How do you know if it’s failed?
If your refrigerator isn’t cooling properly, it’s a good idea to check the start capacitor. A failed capacitor will usually show signs of bulging or leaking. It may also be discolored.
If you suspect your start capacitor has failed, it’s important to replace it as soon as possible. A failed start capacitor can cause your compressor to overheat and fail.
How do you replace it?
If your start capacitor has failed, you’ll need to replace it with a new one. You can find replacement capacitors at most hardware stores or online. Be sure to get the correct size and voltage for your refrigerator.
Once you have the new capacitor, simply remove the old one and connect the new one in its place. Be sure to connect the positive and negative leads correctly.
7. Temperature Control Board.
The temperature control board regulates the temperature in your fridge. If it’s not working properly, your fridge won’t cool properly.
To test the temperature control board, use a multimeter to test it for continuity. If the multimeter doesn’t register continuity, replace the temperature control board.
Why does it fail?
The most common reason for the temperature control board to fail is because of a power surge.
When there is a power outage, the power can come back on suddenly and with too much force.
This can cause the internal components of the fridge to become damaged. If you have a power surge protector, it may have failed to do its job.
How to fix it?
If the temperature control board has failed, you will need to replace it. You can do this yourself if you are handy with tools and have some experience working with electrical components. If not, you will need to call a refrigerator repair technician.
8. Thermistor.
If your Maytag refrigerator isn’t cooling, one possible reason is that the thermistor is defective. The thermistor is a temperature-sensitive device that helps regulate the internal temperature of the fridge.
If it’s not working properly, the fridge won’t be able to maintain its proper temperature, and your food will spoil.
Why does it fail?
There are a few reasons the thermistor could fail. The most common reason is that it gets too hot, which causes it to break down.
Another possibility is that it gets wet, which can also damage it. Finally, it’s possible that it simply wears out over time and needs to be replaced.
If your thermistor fails, it’s important to replace it as soon as possible. Otherwise, your fridge will not be able to properly regulate its temperature, which can lead to food spoilage.
Replacing the thermistor is a relatively easy task that most people can do themselves. However, if you’re not confident in your ability to do so, you can always hire a professional to do it for you.
9. Compressor.
The compressor is responsible for circulating refrigerant throughout the coils in your fridge. If the compressor isn’t running, the fridge can’t cool properly.
Why does it fail?
Compressor failure is one of the most common reasons a refrigerator stops cooling. The compressor is a pump that circulates refrigerant through the system.
Over time, it can wear out or overheat, causing it to fail. If your compressor fails, you’ll need to replace it.
How to fix it?
If your compressor fails, you’ll need to replace it. You can do this yourself if you’re handy with tools, or you can hire a professional.
Replacing a compressor is not a difficult task, but it does require some knowledge of refrigeration systems. If you’re not sure how to do it, hire a professional.
10. Main Control Board.
This part controls most of the fridge’s functions, including the compressor, so it’s likely the culprit if something isn’t working right. To test it, unplug the fridge and remove the control board.
Check for burnt out or loose wires—if you see any, replace the control board. If the wires all look good, test the main control board with a multimeter. If it doesn’t show continuity, replace it.
Why does it fail?
There are many reasons why a main control board could fail. The most common reason is because of a power surge.
A power surge can cause the board to become fried and no longer work. Another common reason is because of a manufacturing defect. If the board was not made correctly, it can cause it to fail prematurely.
How to fix it?
If your main control board has failed, there are a few things you can do. The first is to check if the power supply is still working. If it is, then you will need to replace the main control board.
Another option is to try and reset the board. This can be done by unplugging the refrigerator for 24 hours and then plugging it back in. This may reset the board and get it working again.
If your refrigerator is still not cooling, there are a few other things you can check. These include the condenser coils, evaporator coils, and compressor.
Related:
- 11 Reasons Why LG Refrigerator Not Cooling? {How to Fix}
- 17 Reasons for Kenmore Refrigerator Not Cooling and How to Fix It
- GE Hotpoint Refrigerator That’s Not Cooling? {Here’s How To Fix It}
- Frigidaire Side by Side Refrigerator Not Cooling? How to Fix It
- Frigidaire Refrigerator Not Cooling? 6 Reasons Why and How to Fix Them
- 8 Reasons for GE Refrigerator Not Cooling and {How To Fix}
- 10 Reasons For Whirlpool Refrigerator Not Cooling and {How To Fix}
- 10 Reasons KitchenAid Refrigerator Not Cooling? Here’s the Fix
Maytag refrigerator compressor not running?
If your Maytag refrigerator’s compressor isn’t running, there are a few possible reasons why. The most common reason is that the fridge is not properly plugged into the wall outlet.
Check to make sure that the power cord is firmly plugged into both the fridge and the outlet. If it is, then check to see if the outlet has power by plugging in another appliance.
Another possible reason the compressor isn’t running is because the fridge is not set to the correct temperature.
The fridge will only run the compressor when it needs to cool down the inside of the fridge. If the temperature is set too low, the compressor will run constantly and will eventually overheat and shut off.
If the temperature is set too high, the compressor will not run often enough and the fridge will not stay cold.
If you’ve checked both of these things and the compressor still isn’t running, then it’s possible that there is an issue with the compressor itself. This is a more serious problem that will likely require a repairman to fix.
In the meantime, you can try turning the fridge off for a few minutes, then turning it back on again. This might reset the compressor and get it running again.
How long does it take for a Maytag refrigerator to get cold?
It usually takes about 24 hours for a Maytag refrigerator to get cold. However, this may vary depending on the model and how full the fridge is.
If you’re trying to speed up the process, you can put a bowl of ice in the fridge to help it along. Just make sure to remove it once the fridge is cold so that it doesn’t melt and make a mess!
If you’re having trouble getting your fridge to cool down, there are a few things you can check. Make sure that the vents aren’t blocked, and that the temperature is set low enough. You may also want to try cleaning the coils, as dirt and dust can build up over time and make it harder for the fridge to stay cool.
Why Maytag MZD2766GE refrigerator not cooling and how to fix?
There are a few reasons why your Maytag MZD2766GE refrigerator may not be cooling. The most common reason is that the fridge is not properly plugged into the wall outlet. Another possibility is that the power cord is damaged and needs to be replaced.
If your fridge is properly plugged in and the power cord looks to be in good condition, the next step is to check the condenser coils. These coils are responsible for removing heat from the fridge, so if they are dirty or covered in dust, it can cause the fridge to run less efficiently and not cool properly. To clean the coils, simply unplug the fridge and vacuum them with a brush attachment.
If your fridge is still not cooling after checking these simple things, it may be time to call a repairman. However, if you have a little bit of handyman knowledge, there are a few things you can try before calling for help.
First, check to see if the evaporator fan is running. This fan is responsible for circulating the cold air inside the fridge, so if it is not running, the fridge will not be able to properly cool.
To check the evaporator fan, open up the freezer door and look for a small hole near the top of the fridge. If you see a hole, that means the fan is not running.
To fix this, simply unplug the fridge and remove the evaporator fan motor. Once you have removed the motor, you can simply put it back in place and plug the fridge back in. The evaporator fan should start running and your fridge should start cooling again.
Why is my Maytag refrigerator not getting cold?
This is a question that we get asked a lot, and unfortunately, there isn’t always a clear answer. Sometimes it can be something as simple as the fridge being set to the wrong temperature or being too full and not allowing enough air to circulate.
Other times, it could be a more serious issue like the compressor or evaporator coils needing to be cleaned or replaced. If you’re having trouble with your Maytag fridge, here are a few things to check:
-First, make sure that the fridge is set to the correct temperature. The ideal setting for most refrigerators is between 35 and 40 degrees Fahrenheit.
-Next, take a look at how full your fridge is. If it’s packed too tightly with food, this can limit the air circulation and prevent the fridge from getting cold enough.
-If those two things check out, then it’s time to take a look at the compressor and evaporator coils. These coils can sometimes get dirty, which can cause the fridge to have trouble cooling. Cleaning or replacing them may be necessary.
How do you reset the compressor on a Maytag refrigerator?
The compressor is located in the back, right side of the refrigerator. It has a black cover and is about the size of a shoe box. To reset it, unplug the refrigerator for 30 seconds and then plug it back in.
The compressor will start automatically. If it doesn’t, check to make sure that the circuit breaker is turned on. If the compressor still doesn’t start, call a Maytag service technician.
How do I turn the cooling back on my Maytag refrigerator?
I turned the power off to the refrigerator for about an hour and a half while I was gone today. When I came home, everything in the refrigerator was thawed out. How do I turn the cooling back on so that my food doesn’t spoil?
There are a few things that you can check if your Maytag fridge is not cooling properly. First, check to see if the power cord is plugged into a working outlet. If it is, then you can try resetting the fridge by unplugging it for 30 seconds and then plugging it back in.
How do you test a Maytag refrigerator compressor?
To test your Maytag refrigerator compressor, first make sure that the power is turned off to the unit.
Next, remove the compressor cover and disconnect the wires from the terminals.
Finally, use a multimeter to test for continuity between the two terminals. If there is no continuity, then the compressor may need to be replaced.
Where is the evaporator fan located in a Maytag refrigerator?
The evaporator fan is located in the back of the refrigerator, behind the coils. To access it, you will need to remove the rear panel. The fan is mounted to the panel and blows air across the coils to cool them.
If your refrigerator is not cooling properly, check the evaporator fan for dirt or debris that could be blocking the blades. Clean the fan as needed and be sure to unplug the refrigerator before servicing it.
How do you put a Maytag refrigerator in diagnostic mode?
The first step is to locate the diagnostic mode switch. This switch is usually located behind the kickplate at the bottom of the fridge. Once you’ve found the switch, flip it to the “on” position.
Next, press and hold the refrigerator’s “light” button for five seconds. After five seconds have passed, release the button and then press it again. Doing this will put the fridge into diagnostic mode and the lights inside should begin flashing.
If you need to exit diagnostic mode, simply press and hold the “light” button for five seconds once again. The lights should stop flashing and the fridge will be back in normal operation mode.