Last Updated on August 15, 2022 by Kimberly Crawford
Has your LG refrigerator ice maker stopped working? This can be a frustrating problem to deal with, but don’t worry – we have the fix!
In this blog post, we will walk you through the steps to take to get your ice maker up and running again. We will also provide some tips on how to prevent this from happening in the future. Keep reading for more information.
LG Ice Maker Not Dispensing Ice?
1. Auger Motor.
The auger motor is responsible for turning the auger blade that crushes the ice cubes. If your LG ice maker isn’t dispensing ice, it could be because the auger motor is defective. You’ll need to replace the auger motor to fix this issue.
To replace the auger motor, first, you’ll need to remove the ice bin. There are usually two screws that hold the ice bin in place. Once you’ve removed the screws, lift up on the bin and it should come right off.
Next, locate the auger motor. It’s usually located near the back of the ice maker unit. There will be two wires connected to it. Disconnect the wires and then remove the screws that hold the motor in place.
Now, you can install the new auger motor. Simply reconnect the wires, screw it into place, and then replace the ice bin.
2. Dispenser Actuator.
The main reason this happens is because the actuator, which is located behind the control panel, gets stuck in the “on” position.
To fix this, simply turn off the power to the ice maker and then remove the two screws that hold it in place.
Next, take a look at the actuator and see if it’s damaged. If so, you’ll need to replace it. Finally, put everything back together and turn the power back on.
3. Dispenser Control Board.
The good news is that if your LG ice maker is not dispensing ice, the problem may be with the Dispenser Control Board. This is a relatively easy fix and does not require a lot of time or money to repair.
This board controls the ice maker and dispenser. If it is not working properly, it can cause the ice maker to not dispense ice.
To replace the Dispenser Control Board, you will need a Phillips head screwdriver and a flat head screwdriver. First, locate the Dispenser Control Board. It is usually located behind the ice maker.
Once you have found the board, remove the screws that hold it in place. Be careful not to lose any of the screws.
Next, disconnect the wires from the old board and connect them to the new board. Make sure that all of the wires are securely connected.
Finally, replace the screws and put the ice maker back together.
4. Dispenser Door Motor.
The motor that opens and closes the ice maker door is located behind the control panel. If the motor is defective, the door will not open or close.
To test the motor, open the freezer door and manually push the door switch to see if the ice maker starts. If it doesn’t start, replace the dispenser door motor.
To replace the motor, first remove the ice bucket and then unscrew the two screws that hold the control panel in place. Disconnect the wiring harness from the control panel and then remove the panel.
Behind the control panel, you’ll see the dispenser door motor. Remove the two screws that hold it in place and disconnect the wiring harness. Install the new motor in the reverse order. Be sure to reconnect the wiring harness before you screw the motor in place.
5. Dispenser Solenoid.
The dispenser solenoid is an electromagnet that opens and closes the ice door. If the dispenser solenoid is defective, the ice door will not open.
To test the dispenser solenoid, use a multimeter to test it for continuity. If there is no continuity, replace the dispenser solenoid.
To replace the dispenser solenoid:
- Unplug the refrigerator.
- Remove the ice bucket.
- Loosen the screws that secure the dispenser solenoid to the door.
- Pull the dispenser solenoid out of the door and disconnect it from the wire harness.
- Push the new dispenser solenoid into place and tighten the screws.
- Reconnect the wire harness to the dispenser solenoid.
- Plug in the refrigerator and test the ice dispenser.
6. Dispenser Switch.
The switch may be defective.
To check the switch, unplug the refrigerator and remove the switch from the console. Test it for continuity with a multimeter. If it does not have continuity, replace it.
To replace the switch, follow these steps:
- Unplug the refrigerator.
- Remove the screws that hold the switch in place.
- Pull the switch out of the console and disconnect the wires.
- Connect the new switch and reassemble the console.
- Plug in the refrigerator and test the dispenser. If it still does not work, the problem may be with the dispenser motor.
7. Formation of Ice Clumps.
If you have an LG ice maker that is not dispensing ice, it could be due to the formation of ice clumps.
Ice makers work by cycling a small amount of water over a freezing element. This process can sometimes cause ice to form in the tray, which can then prevent the ice maker from dispensing ice properly.
8. Ice Bucket Auger.
The auger is the part of the ice maker that crushes the ice cubes and propels them into the dispenser. If your LG ice maker is not dispensing ice, it could be because the auger is frozen.
To thaw a frozen auger, remove it from the freezer and place it in a bowl of warm water for about 15 minutes. If the auger is still frozen, you may need to replace it.
To replace the auger, first remove the ice bucket. Next, remove the screws that secure the auger to the freezer wall and lift the auger out. Replace it with a new one and reassemble the ice maker.
9. Ice Crusher Blade.
If your ice maker is not dispensing ice, there’s a good chance that the ice crusher blade is to blame.
This part is responsible for crushing the ice cubes so they can be dispensed through the door. If it’s broken or damaged, it will need to be replaced.
To replace the ice crusher blade, you’ll need to:
- Remove the ice bin from the freezer
- Unscrew the screws that hold the blade in place
- Remove the old blade and replace it with a new one
- Screw the new blade into place
- Replace the ice bin and fill it with fresh ice cubes
10. Ice Maker Fan.
If your LG ice maker is not dispensing ice, it may be because the fan is not working. The fan is responsible for circulating air around the ice maker, and if it is not working, the ice maker will not be able to operate properly.
You can check the fan by opening the freezer door and looking for a small black box near the back of the freezer. If you see a black box, that is the fan.
If you do not see a black box, then the fan is not working and you will need to replace it. Replacing the fan is a relatively easy task that you can do yourself with a few tools.
11. Water Supply Line.
Check to make sure the ice maker’s water supply line isn’t frozen. A frozen water supply line is the most common reason an ice maker stops working. To thaw a frozen water supply line:
-Unplug the refrigerator or turn off the circuit breaker that provides power to it.
-Remove any food from the refrigerator.
-Turn off the water supply to the refrigerator.
-Carefully remove the ice maker from the refrigerator.
-Thoroughly inspect the water line for any signs of damage, such as cracks or kinks.
-If the line is damaged, replace it with a new one.
-Turn on the water supply to the refrigerator.
LG refrigerator ice maker not filling with water?
This may be due to a few different reasons. Check the following:
1. Inlet valve.
The inlet valve is located behind the refrigerator, near the bottom. It is a small, rectangular box with two hoses coming out of it. One hose goes to the ice maker, and the other goes to the water dispenser.
The inlet valve has a screen that filters out debris and keeps sediment from getting into your ice maker or water dispenser.
If the inlet valve is clogged, it will not allow water to flow into the ice maker properly. To clean the inlet valve, remove the screen and flush it with a solution of vinegar and water.
2. Ice maker.
The first thing you need to do is make sure that your ice maker is turned on. If it is, then check to see if the water line that supplies the ice maker is frozen. If it is, then thaw it out and see if that fixes the problem.
3. Water supply line.
Check the water line going to your ice maker. If it is frozen, thaw it out and see if that solves the problem.
If the line is not frozen, make sure there is water coming out of the line by disconnecting it from the ice maker and turning on the water. If there is no water coming out of the line, you will need to replace the water line.
4. Control board.
The control board controls the ice maker’s fill cycle, so if it isn’t working properly, the ice maker won’t be able to fill with water.
To test the control board, first make sure that it is receiving power. Check the wire harnesses going to the control board for loose connections or damage. If the control board is getting power, but it still isn’t working properly, you will need to replace it.
5. Water filter.
If your LG refrigerator’s ice maker is not filling with water, it could be because the water filter needs to be replaced. A clogged or dirty water filter can restrict the flow of water to the ice maker, preventing it from filling up. Replacing the water filter is an easy fix that you can do yourself.
To replace the water filter, first locate the filter compartment. On most LG refrigerators, the filter compartment is located in the bottom right corner of the fridge, behind a small grille. Once you’ve found the filter compartment, open it up and remove the old water filter.
To install the new water filter, simply insert it into the compartment and close the door. Once the new filter is in place, the ice maker should start working again. If it doesn’t, there may be another issue causing the problem.
6. Water hose.
Check the water hose to ensure it is not kinked or frozen. The water pressure coming into your home may also be too low. Check your home’s water pressure and increase it if necessary.
LG refrigerator ice maker not working after changing water filter?
Here are some possible causes and solutions.
If the ice maker is not working after changing the water filter, make sure that the new filter is properly installed according to the manufacturer’s instructions.
It is also possible that there is air in the line. To remove air from the line, bleed the line according to the manufacturer’s instructions.
If the ice maker is still not working, it may be due to a frozen water line. To thaw a frozen water line, disconnect the power to the refrigerator and use a hair dryer or heat gun to thaw the line. Once the line is thawed, reconnect the power and check to see if the ice maker is now working.
If the ice maker is still not working, it may be due to a faulty ice maker assembly. If this is the case, you will need to replace the assembly. Check your owner’s manual for instructions on how to do this.
LG french door refrigerator ice maker not dumping ice?
Here are some possible causes and solutions:
-There could be an issue with the ice maker itself. Try unplugging it for a few minutes, then plugging it back in. If that doesn’t work, you may need to replace the ice maker.
-The freezer temperature could be set too low. Try raising the temperature a few degrees and see if that helps.
-There could be something blocking the ice maker from dumping the ice. Check to make sure there’s nothing in the way, and that the ice maker is level.
LG refrigerator not making enough ice?
If your LG refrigerator isn’t making enough ice, there could be several potential causes. First, check to make sure that the ice maker is turned on. If it is, then the next step is to clean the ice maker and its components. A build-up of dirt and debris can prevent the ice maker from working properly.
If cleaning the ice maker doesn’t solve the problem, then the next step is to check the water supply. Make sure that there is enough water pressure and that the water filter isn’t clogged. If those things are all in order, then it’s possible that the ice maker itself is defective and will need to be replaced.
LG refrigerator ice maker overflows with water?
If your LG refrigerator ice maker is overflowing with water, there are a few potential causes. First, check to see if the ice maker’s water supply line is clogged or frozen.
If so, thaw the line and see if that solves the problem. If not, it’s possible that the ice maker itself is defective and will need to be replaced.
Fortunately, most LG refrigerator models come with a one-year warranty that covers parts and labor, so you shouldn’t have to pay for a new ice maker out of pocket. However, if your fridge is out of warranty, you can expect to pay around $200 for a new ice maker (including installation).
If you’re handy, you can save a few bucks by replacing the ice maker yourself. Just be sure to unplug your fridge before beginning any repairs.
LG refrigerator ice maker keeps dispensing ice?
There are a few things that could be causing this. Let’s take a look at some of the most common causes and solutions.
The first thing you want to check is the ice maker itself. If the ice maker is clogged or frozen, it could be causing the problem. Try unplugging the ice maker for a few minutes and then plugging it back in. If that doesn’t work, you may need to replace the ice maker.
Another common cause of this problem is a clogged water filter. If the water filter is clogged, it can restrict the flow of water to the ice maker, causing it to dispense less ice. Try replacing the water filter to see if that solves the problem.
Finally, if neither of those solutions works, it’s possible that there is something wrong with the water line to the ice maker. This is a more serious problem that will require a plumber to fix. But once they fix it, your ice maker should start working properly again.
If your LG refrigerator ice maker keeps dispensing ice, don’t despair. There are a few things you can try to fix the problem. If all else fails, you may need to call a plumber. But with a little troubleshooting, you should be able to get your ice maker working again in no time.
LG ice maker making ice so slow?
There could be a number of reasons why your LG ice maker is making ice so slowly. One possibility is that the water supply line to the ice maker is blocked or frozen. Another possibility is that the ice maker itself is dirty or needs to be descaled.
If you suspect that the water supply line is blocked or frozen, the first thing you should do is check the ice maker’s water filter. If the filter is clogged, it could be restricting the flow of water to the ice maker. replacement.
If descaling is necessary, there are a few things you can do to speed up the process. First, make sure that you are using the correct descaling solution. Second, use hot water instead of cold water. This will help to dissolve the scale more quickly. Finally, make sure that you follow the manufacturer’s instructions carefully.
LG refrigerator bottom freezer ice maker not working?
Here are some possible causes and solutions.
There are several reasons why your LG refrigerator bottom freezer ice maker might not be working. The most common problem is that the ice maker is turned off. If the ice maker is turned off, it will not make ice.
Another possibility is that the water supply to the ice maker is turned off. If the water supply is turned off, the ice maker will not be able to make ice.
The most likely cause of your LG refrigerator bottom freezer ice maker not working is that it is turned off. To turn on the ice maker, press the power button. If the power button does not turn on the ice maker, check the circuit breaker. The circuit breaker may have tripped, preventing the ice maker from turning on.
If the ice maker is turned on and there is still no ice, the next most likely cause is that the water supply to the ice maker is turned off.
To turn on the water supply, locate the shut-off valve. The shut-off valve is usually located behind the refrigerator. Once you have located the shut-off valve, turn it on by turning it to the right.
If your LG refrigerator bottom freezer ice maker is still not working, there may be a problem with the ice maker itself. If this is the case, you will need to contact a qualified repair person to diagnose and repair the problem.
LG ice maker test button not working?
Here are some possible causes and solutions.
If the ice maker test button does not seem to be working, there could be a few different reasons why. One possibility is that the ice maker itself is turned off. To check this, simply look for a switch near the ice maker (usually located on the side or back of the refrigerator) and make sure it is turned to the “on” position.
Another possibility is that there is a power issue. Check to make sure that the refrigerator is plugged into an outlet and that the outlet has power. If both of these are true, then try resetting the circuit breaker for the fridge.
If neither of these solutions work, then it is possible that there is an issue with the ice maker itself and it will need to be replaced.
LG french door refrigerator ice maker not working?
Here are some causes and solutions to get it working again.
There are a few possible reasons why your LG french door refrigerator ice maker is not working. It could be that the ice maker is turned off, there’s something blocking the ice maker, or there could be a problem with the water line.
To fix an ice maker that’s turned off, simply press the power button to turn it on. If there’s something blocking the ice maker, like ice cubes that are stuck in the tray, you’ll need to remove them so that the ice maker can function properly.
If there appears to be a problem with the water line, you’ll need to check that it’s properly connected and that there’s no blockage. Once you’ve checked all of these things, your LG french door refrigerator ice maker should be working again.
LG linear compressor refrigerator ice maker not working?
Here are some possible causes and solutions.
- If the ice maker is not working, first check to see if it is properly connected to a water source.
- Next, check to see if the ice maker is turned on. If it is turned off, turn it on and wait 24 hours for it to start making ice.
- If the ice maker is still not working, check to see if there is a water filter in place. If there is no water filter, replace it.
- Finally, if the ice maker is still not working, contact LG customer service for assistance.
LG smart inverter refrigerator ice maker not working?
Here are some possible causes and solutions to fix the issue.
One possible reason why your ice maker might not be working is because it’s not turned on. Check the power button to make sure it’s in the ON position. If it is, then check to see if there’s a problem with the outlet by plugging something else into it.
Another possibility is that the ice maker is turned off. There’s usually a switch on the ice maker itself that you need to flip to the ON position. If that’s not the problem, then it could be an issue with the water line. Make sure the water line is connected to the ice maker and that there’s no kink in the line.
LG RV refrigerator ice maker not working?
Check out this quick guide to find out the most common causes and solutions.
One of the most common issues with LG rv refrigerators is that the ice maker stops working. If you’re having this problem, don’t worry – there are a few things you can do to fix it.
The first thing you should check is the water line. If there is a problem with the water line, it could be preventing water from reaching the ice maker. Another possibility is that the ice maker itself is frozen. If this is the case, you’ll need to thaw it out before it will start working again.
If neither of these solutions works, then you may need to replace the ice maker. Fortunately, this is a relatively easy process and you should be able to find a replacement ice maker at your local hardware store.
Where is the reset button on an LG Ice Maker?
The LG Ice Maker is a great addition to any kitchen. It makes ice quickly and efficiently, and it’s easy to use. But sometimes, you may need to reset the ice maker. So where is the reset button on an LG Ice Maker?
The reset button on an LG Ice Maker is located on the back of the unit. To reset the ice maker, simply press and hold the button for about five seconds. Then, release the button and wait for the ice maker to restart. That’s all there is to it!
Related:
Conclusion
If your LG refrigerator ice maker is not working, there are a few things you can do to try and fix the issue.
First, check to see if the ice maker is turned on. If it is, then you will need to clean the ice maker and make sure there is no blockage preventing the ice from being made.
You can also try adjusting the ice maker settings to see if that helps. If none of these things work, then you may need to call a repairman to come and take a look at your refrigerator.
We hope this article was helpful in troubleshooting your LG refrigerator ice maker issue.