21 Reasons Why GE Washer Not Spinning and Solutions

If your GE washer isn’t spinning, there could be a few different causes. In this blog post, we will discuss some of the most common reasons why your GE washer may not be spinning and how to fix them. We will also provide some tips on how to prevent your washer from not spinning in the future.

Related: 7 Washing Machine Brands To Avoid and 3 Most Reliable Brands

Why is GE Washer Not Spinning? and How To Fix

1. Drain Trap.

If your GE washer is not spinning, the first thing you should check is the drain trap. The drain trap is located under the washer and can become clogged with lint, hair, and other debris.

If the drain trap is clogged, it will prevent water from draining properly and may cause the washer to stop spinning. To clean the drain trap, follow these steps:

-Unplug the washer from the power outlet.

-Remove the screws that secure the access panel to the washer.

-Locate the drain trap and remove it from the washer.

-Empty the contents of the drain trap into a trash can.

-Rinse the drain trap with water and replace it back onto the washer.

-Secure the access panel back onto the washer.

-Plug the washer back into the power outlet and turn it on.

2. Clutch.

The clutch is a component in your washer that helps to spin the tub. If the clutch is worn out, it can cause the washer not to spin.

To check if the clutch is the problem, open up the washer and look for any signs of wear and tear on the clutch. If you see any, then it’s time to replace the clutch.

2. Detergent Level.

Too much or too little detergent can cause your washer to not spin. The first thing you should check is the amount of detergent you are using.

If you are using too much, try reducing the amount you use. If you are using too little, try increasing the amount.

3. Detergent Type.

One of the main culprits of a washer not spinning is the type of detergent you’re using. If you’re using a powder detergent, it could be clumping up and preventing the washer from spinning properly. Try switching to liquid or pods and see if that helps.

4. Door Gasket.

If the door gasket is worn or damaged, it can cause the washer not to spin.

Why does it fail?

Over time, the door gasket can become brittle and crack. This will cause leaks and ultimately lead to the washer not spinning.

What is the solution?

You will need to replace the door gasket. This is a fairly easy repair that you can do yourself. Simply order a new gasket and follow the instructions in your owner’s manual.

5. Door Latch.

The door latch is one of the most common reasons a GE washer won’t spin. If the door isn’t closed properly, the washer won’t start.

Check to make sure the door is shut all the way and that there’s nothing blocking it from closing. You may need to clean the door seal if there’s buildup preventing the door from sealing shut.

6. Door Lock Motor.

The door lock motor is a common cause of the washer not spinning. If the door lock motor is defective, the washer will not spin or agitate.

To test the door lock motor, use a multimeter to test it for continuity. The door lock motor should have continuity when activated. If the door lock motor does not have continuity, replace it.

7. Drive Belt.

The drive belt is a long, narrow band that goes around the outer edge of the washer tub. It’s made of rubber and has grooves in it that grip the edge of the tub. If the drive belt is loose or damaged, it can cause the washer not to spin.

To check the drive belt, unplug the washer and remove the access panel. The drive belt will be around the perimeter of the tub. If it’s loose, you can try to tighten it. If it’s damaged, you’ll need to replace it.

To replace the drive belt, you’ll need to order a new one from the manufacturer. Once you have the new drive belt, follow these steps:

-Unplug the washer and remove the access panel.

-Remove the old drive belt.

-Put the new drive belt around the tub.

-Replace any other parts that were damaged.

-Reattach the access panel and plug in the washer.

If you’re not comfortable doing this yourself, you can always call a repairman. But replacing a drive belt is usually a pretty simple fix.

8. Drive Motor.

Another common cause of the washer not spinning is a defective drive motor. The drive motor turns the washer’s drum during the spin cycle. If the drive motor is defective, it may not be able to turn the drum. As a result, the washer won’t spin.

To determine if the drive motor is defective, first check the drive belt. If the drive belt is broken or worn, it will need to be replaced. Next, inspect the drive motor for damage. If you find damage, the drive motor will need to be replaced.

To replace the drive motor, you will need to remove the washer’s cabinet. Once the cabinet is removed, you will be able to access the drive motor.

Disconnect the wires from the motor and then remove the mounting bolts. Remove the old motor and then install the new one. Reconnect the wires and then replace the cabinet.

9. Level the Washer.

If your washer isn’t level, it can cause the spin cycle to be off balance, and as a result, your washer won’t spin.

Use a level to check both the front and back of the machine to make sure it’s balanced. You can adjust the leveling legs accordingly.

10. Lid Switch.

The lid switch is a safety device that prevents the washer from spinning when the lid is open. If your washer won’t spin, check to see if the lid switch is defective.

To do this, unplug the washer and remove the lid. Then, use a multimeter to test continuity between the two terminals on the lid switch. If there is no continuity, the lid switch will need to be replaced.

If the lid switch needs to be replaced, it is a fairly simple process. First, unplug the washer and remove the lid.

Then, locate the two wires that are connected to the lid switch and disconnect them. Next, remove the two screws that hold the lid switch in place and then remove the switch. Finally, install the new switch and reassemble the washer.

11. Load Imbalance.

One of the most common causes for a GE washer not spinning is an imbalance in the load. This can be easily remedied by redistributing the clothes evenly in the drum.

If that doesn’t work, try adding a few more items to the load as this will help create a better balance.

12. Master Reset.

If your washer is still not spinning, you may need to reset it. To do this, unplug the washer for 30 seconds and then plug it back in.

This should reset the washer and get it working again. If this does not work, you may need to call a professional for help.

13. Moto Control Board.

Another possible cause of a GE washer not spinning is a faulty Moto Control Board. This board controls the washing machine’s motor and if it is damaged, the washer will not spin.

To test whether the Moto Control Board is causing the problem, first check to see if there is power going to the board.

If there is no power, then the board is likely faulty and will need to be replaced. If there is power, then the board may not be faulty and you should check other possible causes.

To replace the moto control board:

-First, remove the washing machine’s cabinet to access the board.

-Next, disconnect the wires from the board and remove it from the washing machine.

-Then, install the new board in the same location and reconnect the wires.

-Finally, replace the cabinet and test the washer to see if it is now spinning

14. Motor Coupling.

One of the most common causes for a GE washer not spinning is a failed motor coupling. The motor coupling connects the inner wash tub to the drive system and if it fails, the washer will not spin.

Motor couplings can fail due to normal wear and tear or because of a power surge. To check for a failed motor coupling, remove the rear panel of the washer and look for a broken or damaged coupling. If the coupling is damaged, it will need to be replaced.

To replace the motor coupling, you will need to remove the washing machine tub. This is done by removing the four bolts that hold the tub in place.

Once the tub is removed, you can access the motor coupling and replace it with a new one. Be sure to follow the instructions that come with the new coupling to ensure proper installation.

15. Overstuffed or Understuffed machine.

The capacity of your washer is determined by the model you have. A too-full load can cause a GE washer not to spin.

To prevent this, don’t overload your machine and be sure to follow the manufacturer’s recommendations for capacity.

An understuffed machine can also lead to poor spinning results. Again, following the manufacturer’s directions for capacity will help to avoid this problem.

If your machine is overstuffed or understuffed, try redistributing the load and starting the cycle again. If that doesn’t work, you may need to call a technician for assistance.

16. Rotor.

If the rotor is defective, the washer may not spin. To check if the rotor is defective, remove the access panel and inspect the rotor for any damage. If the rotor is damaged, it will need to be replaced.

To replace the rotor, follow these steps:

  • Unplug the washer from the power outlet.
  • Remove the access panel.
  • Disconnect the wires from the defective rotor.
  • Remove the screws that hold the rotor in place.
  • Install the new rotor and screw it in place.
  • Reconnect the wires to the new rotor.
  • Replace the access panel and plug the washer back into the power outlet.

17. Spin Cycle.

The first thing you should do if your GE washer is not spinning is to check the spin cycle. If the spin cycle is set to “off,” then your washer will not spin.

To check the spin cycle, simply turn the knob to the “on” position. If the knob is already in the “on” position, then try turning it to the “off” position and then back to “on.” This should reset the spin cycle and get your washer spinning again.

18. Stator.

The stator is a part of the washing machine that helps to keep the drum in place while it spins. If this part is damaged, it can cause the drum to spin erratically or not at all.

You can check for damage to the stator by looking for cracks or breaks in the part. If you find any damage, you will need to replace the stator.

To replace the stator, you will need to remove the back panel of the washing machine. Once you have access to the stator, you will need to disconnect the wires from it and then remove it from the washing machine.

To install the new stator, simply reverse these steps. Be sure to check that all of the wires are properly connected before turning on the washing machine.

19. Transmission.

The transmission is a complex piece of machinery, and if it’s not working correctly, your washer won’t spin. If you’re having trouble with your GE washer not spinning, one possible cause is the transmission.

To check if the transmission is the problem, first make sure that there isn’t anything blocking the washer from spinning.

Then, open up the washer and check the transmission for any signs of damage. If you see any damage, it’s likely that the transmission is the problem and you’ll need to replace it.

To replace the transmission, you’ll need to contact a GE appliance repair technician.

20. Water Level Control.

If your washer isn’t spinning, it could be because there’s not enough water in the tub. The water level control is a switch that tells the washer how much water to add. If it’s not working properly, it could be adding too little water or no water at all.

To check if the water level control is the problem, remove the back panel of your washer and locate the switch. Test it with a multimeter to see if it’s working properly. If it is, you’ll need to replace it.

To replace the water level control, you’ll need to:

  • Disconnect the power to your washer.
  • Remove the back panel.
  • Locate the water level control switch and disconnect it from the wiring harness.
  • Remove the mounting screws and pull out the old switch.
  • Install the new switch and reconnect it to the wiring harness.
  • Replace the back panel and reconnect the power to your washer.

21. Water Pump.

The water pump is responsible for moving the water from the tub and into the spinning basket. If your washer is not spinning, it could be due to a problem with the water pump.

To check if the water pump is working properly, you can remove the hose from the back of the washer and see if water is coming out. If there is no water coming out, then the water pump is most likely not working and will need to be replaced.

To replace the water pump, you will need to remove the back panel of the washer. Once the back panel is removed, you will be able to access the water pump.

Simply unplug the old water pump and replace it with a new one. Be sure to reconnect all of the hoses before putting the back panel back on.

New GE washer not spinning?

Here are some possible causes and solutions.

If your new GE washer isn’t spinning, it could be because of a power issue, a defective lid switch, or an overloaded washing machine.

If the problem is with the power, check to make sure that the washer is plugged in and that the circuit breaker hasn’t tripped. If the lid switch is defective, it will need to be replaced. If the washing machine is overloaded, redistribute the laundry load evenly and try again.

GE top load washer not spinning clothes dry?

Here are some possible causes and solutions.

If your GE top load washer is not spinning clothes dry, there are several possible causes. One possibility is that the washer is not set to the correct cycle.

Another possibility is that the washer lid is not closed properly. Finally, it is also possible that the washer itself is not level.

If the washer is not set to the correct cycle, you will need to adjust the settings. To do this, simply turn the knob to the appropriate setting.

If the washer lid is not closed properly, you will need to make sure that it is securely shut. Finally, if the washer itself is not level, you will need to adjust the legs until it is level.

GE front load washer not spinning?

If your GE front load washer is not spinning, there are a few possible reasons why. One possibility is that the washer’s door is not closed all the way. Check to make sure that the door is completely shut before starting a cycle.

Another possibility is that something is blocking the washer’s spinning mechanism. If there is something blocking the spin cycle, the washer will not be able to properly spin your clothes.

If you have checked both of these potential causes and your GE front load washer still will not spin, it is likely that there is an issue with the washer’s motor.

The motor is responsible for powering the washer’s spin cycle. If the motor is not working properly, the washer will not be able to spin.

GE stackable washer not spinning?

If your GE stackable washer is not spinning, one possible reason is that the washer is not level. Use a level to check both the front and back of the washer, and adjust the leveling feet accordingly.

Another possible reason for a non-spinning GE stackable washer is that the door is not closed properly. Make sure that the door is latched shut and that there are no items blocking it from closing.

If neither of these solutions solve the problem, there may be an issue with the washer’s drive belt or motor. If you suspect this is the case, it’s best to call a qualified repair technician.

GE Washer Won’t Do Final Spin?

If your GE washer won’t do a final spin, there are several potential causes.

The most common cause of a GE washer not spinning is an imbalance in the load. If the clothes in the washer are not evenly distributed, they can become tangled around the agitator or build up on one side of the tub. This can cause the washer to become unbalanced and stop spinning.

Another common cause of a GE washer not spinning is a problem with the lid switch. The lid switch is a safety feature that prevents the washer from spinning when the lid is open. If the lid switch is defective, it may prevent the washer from spinning even when the lid is closed.

If your GE washer won’t do a final spin, check to see if the clothes are evenly distributed in the tub. If not, redistribute them and try again. If that doesn’t work, check the lid switch to see if it is defective. If so, replace it. With a little troubleshooting, you should be able to get your GE washer spinning again in no time.

Related: How to Balance a Washing Machine – The Ultimate Guide

GE washer not spinning fast?

This is a common problem and there are a few things that could be causing it.

One of the most common causes is that the washer isn’t level. If your washer isn’t level, it can cause the load to be unbalanced, which will make the washer spin more slowly.

Another common cause is that the lid switch is defective. If the lid switch is defective, it can cause the washer to spin more slowly.

If your washer is spinning more slowly than usual, there are a few things you can do to try to fix the problem. First, make sure that the washer is level.

You can do this by checking the leveling feet and adjusting them if necessary. Second, check the lid switch and replace it if necessary.

GE washer not spinning and making noise?

If your GE washer is not spinning and making noise, there could be several reasons why. One possibility is that the washer’s lid switch is damaged or misaligned. Another possibility is that the washer’s drive belt is loose or damaged. Finally, the washer’s motor could be damaged.

If your GE washer is not spinning and making noise, the first thing you should do is check the lid switch. If the lid switch is damaged or misaligned, it could prevent the washer from spinning.

To check the lid switch, open the washer’s lid and look for a small button near the top of the washer. If the button is not there, or if it is damaged, you will need to replace the lid switch.

If the lid switch is not the problem, the next thing you should check is the drive belt. The drive belt helps to rotate the washer’s drum. If the drive belt is loose or damaged, it could prevent the washer from spinning.

To check the drive belt, open the washer’s lid and look for a small belt near the bottom of the washer. If the belt is not there, or if it is damaged, you will need to replace the drive belt.

Finally, if neither the lid switch nor the drive belt is the problem, the most likely cause is a damaged motor. The motor helps to rotate the washer’s drum. If the motor is damaged, it will need to be replaced.

GE washer not spinning at high speed?

This is a very common problem and there are several possible causes. One of the most common causes is that the washer’s lid switch is not working properly. Another possibility is that the washer’s drive belt has come off or is broken.

If your GE washer is not spinning at high speed, first check to see if the lid switch is working properly. If the lid switch is not working, the washer will not be able to spin at high speed.

To test the lid switch, open the washer’s lid and try to start the washer. If the washer does not start, then the lid switch is likely defective and will need to be replaced.

If the lid switch is working properly, then the next most likely cause is that the washer’s drive belt has come off or is broken. The drive belt is what turns the washer’s drum.

If the drive belt is not working properly, the washer will not be able to spin at high speed. To check the drive belt, open the washer’s lid and locate the belt. If the belt is broken or has come off, it will need to be replaced.

GE washer won’t stop spinning?

The first thing you should do if your GE washer won’t stop spinning is to check the lid switch. The lid switch is a safety feature that keeps the washer from operating when the lid is open. If the lid switch is defective, it may not shut off the washer when the lid is opened.

If the lid switch is not the problem, the next thing to check is the door lock. The door lock prevents the washer from starting or spinning when the door is open. If the door lock is defective, it may not shut off the washer when the door is opened.

If neither of these are the problem, then the next thing to check is the spin cycle switch. The spin cycle switch controls the speed of the washer’s spinning. If the spin cycle switch is defective, it may not shut off the washer when the spin cycle is finished.

Once you’ve checked all of these things, if your GE washer still won’t stop spinning, then you may need to call a repairman.

GE washer won’t spin just make clicking noise?

If your washer is making a clicking noise but won’t spin, there are a few things that could be causing the problem. First, check to see if there is anything caught in the washing machine’s drain pump.

If there is something caught in the pump, it will need to be removed before the washer can operate properly.

Additionally, the washing machine’s drive belt may be loose or damaged. If the drive belt is loose, it will need to be tightened. If the drive belt is damaged, it will need to be replaced.

Finally, the washing machine’s motor may be defective. If the motor is defective, it will need to be replaced.

GE Washer Won’t Complete The Spin Cycle?

If your GE washer won’t complete the spin cycle, there are several possible causes. The most common cause is a problem with the washing machine’s lid switch.

If the lid switch is defective, it may not signal the washing machine to stop spinning when the lid is opened. Other possible causes include a faulty door lock switch, a problem with the washing machine’s drive belt, or a problem with the washing machine’s timer.

GE washer won’t spin with a heavy load?

There are several reasons why your washing machine might not be spinning with a heavy load. Here are some possible causes and solutions:

-The washer’s motor may be overloaded. This can happen if the washer is used frequently or if it hasn’t been properly maintained. To fix this, you’ll need to have the motor checked by a professional.

-The washer’s drive belt may be broken or frayed. This is a common problem with older washing machines. To fix this, you’ll need to replace the drive belt.

-There may be something caught in the washer’s pump. This can happen if there are small items like coins or hair clips in the wash. To fix this, you’ll need to remove the item from the pump and clean it out.

GE washer stuck on the spin cycle?

If your GE washer is stuck on the spin cycle, it could be due to a power issue, a problem with the washing machine’s lid switch, or an issue with the timer. If you’re experiencing this problem, here are some possible causes and solutions.

Power Issue:

If your washer is plugged into a power strip, make sure that the power strip is turned on. If it is, unplug the washer and plug it directly into a wall outlet.

Lid Switch:

The lid switch is a safety feature that prevents the washer from spinning when the lid is open. If this switch is defective, it could cause the washer to get stuck on the spin cycle.

To test the lid switch, open the washer’s lid and try to start the spin cycle. If the washer doesn’t start spinning, then the lid switch is likely defective and will need to be replaced.

Timer:

Another possible cause of a washer getting stuck on the spin cycle is a defective timer. If the timer is not advancing, it will cause the washer stay on the spin cycle. To test the timer, advance it to the next cycle see if the washer starts spinning. If not, then the timer will need to be.

Why is GE washer not spinning all the water out?

There are a few possible reasons why your GE washer is not spinning all the water out. One possibility is that there is something blocking the washing machine’s drainage system. Another possibility is that the washing machine’s settings are not set correctly. Finally, it is also possible that there is a problem with the washing machine itself.

If you are having this problem, there are a few things that you can do to try and fix it. First, check to see if there is anything blocking the washing machine’s drainage system. If there is, clear it away and see if that fixes the problem.

Second, check the washing machine’s settings to make sure that they are set correctly. If they are not, try changing them and see if that fixes the problem.

Finally, if you still have the problem, it is possible that there is a problem with the washing machine itself. In this case, you may need to call a repairman to come and take a look at it.

Why does my GE washer drain but not spin?

There are several possible reasons why your GE washer might drain but not spin. One possibility is that the washer is not draining properly, which can be caused by a clogged drain hose or pump.

Another possibility is that the washer’s drive belt has broken or become slack, preventing the spinning action. Finally, the problem could be with the washer’s motor or other internal components. If you’re not sure what is causing the problem, it’s best to call a professional for help.

How do you reset the spin cycle on a GE washer?

To do this, first make sure that the washer is turned off. Next, unplug the washer from the outlet. Wait 30 seconds and then plug it back in.

Once it’s plugged back in, turn the washer on and select the spin cycle. The washer should now reset and work properly. If it doesn’t, you may need to call a repairman.

Is there a reset button on GE washers?

The answer is yes! GE washers have a reset button that can be used to restart the washing cycle. If your washer is not working properly, you can use the reset button to fix the problem.

To reset your GE washer, press and hold the “Start/Pause” button for five seconds. The washer will then restart the cycle. If your washer does not have a “Start/Pause” button, you can press the “Power” button to turn off the washer. Once the washer is off, press and hold the “Power” button for five seconds to turn on the washer. The washer will then start the cycle.

How do you reset a GE washer that won’t spin?

If your GE washer won’t start spinning, there are a few things you can try to reset it. First, unplug the washer from the power outlet and wait a few minutes.

Then, plug it back in and press the “Reset” button on the control panel. If that doesn’t work, try pressing and holding the “Start/Pause” button for five seconds.

Conclusion

If your GE washer is not spinning, there are a few potential causes and solutions. First, check to see if the washer is properly plugged in and that the circuit breaker has not been tripped. Next, check the drive belt to see if it is broken or loose. Finally, inspect the washing machine’s lid switch to ensure it is not damaged or misaligned.

With a little troubleshooting, you should be able to get your GE washer spinning again in no time.