Last Updated on September 11, 2022 by Kimberly Crawford
If your Frigidaire washer isn’t draining, don’t worry – you’re not alone. This is a common problem that many people experience. In this blog post, we will discuss some of the most common causes of this issue and how to fix it. We will also provide some helpful tips on how to prevent this from happening in the future.
Related: My Washing Machine Not Draining: What Should I Do?
Frigidaire Washer Not Draining: How to Fix It
1. Drain Pump.
The Drain Pump is responsible for draining the water from your washer.
Why is it important?
If your Drain Pump is not working properly, your washer will not be able to drain the water from the tub.
How do I know if my Drain Pump is not working?
There are a few signs that you can look for:
-Your washer does not draining the water from the tub
-Your washer is making a strange noise
-There is water leaking from your washer
How to fix it?
To clean the pump, you will need to remove the front panel of the washer. Once you have access to the pump, you can clean it with a brush or a toothpick. If there is a blockage in the hose, you can try to clear it with a plunger.
How to prevent it?
You can prevent your Drain Pump from becoming blocked by regularly cleaning your washer. You should also avoid overloading your washer so that the water has a chance to circulate properly.
2. Clogged Pump or Hose.
If your Frigidaire washer doesn’t seem to be draining properly, there are a few things you can check before calling in a repairman.
First, make sure that the pump isn’t clogged. The pump is located behind the washing machine’s main tub, and if it’s clogged, the water won’t be able to drain out.
To clean the pump, unplug the washing machine and remove the back panel.
Then, use a screwdriver to remove the clog.
If that doesn’t work, check the hose that drains the water from the tub. The hose might be kinked or blocked, preventing the water from draining properly. Again, unplug the washing machine and remove the back panel. Then, use a screwdriver to unkink or clear the hose.
How to prevent it?
To prevent your Frigidaire washer from getting clogged, make sure to clean out the lint trap after every load of laundry.
Lint can build up in the pump and hose, causing the drainage problems. In addition, don’t overstuff the washing machine. Too much laundry can block the drainage system and cause problems.
3. Door Lock Motor and Switch Assembly.
What are they?
The door lock motor and switch assembly is a device that helps to keep your washer door closed during the wash cycle.
If your Frigidaire washer is not draining, it could be due to a problem with the door lock motor and switch assembly.
Why does it fail?
The door lock motor and switch assembly can fail due to a variety of reasons, such as a power surge, a problem with the door switch, or a problem with the door lock motor itself.
How do you fix it?
This is a relatively easy problem to fix, but you will need to replace the door lock motor and switch assembly.
You can purchase a door lock motor and switch assembly at most hardware stores or online. Be sure to get the correct model for your Frigidaire washer.
Once you have the new door lock motor and switch assembly, follow these steps to replace it:
-Unplug your washer and remove the front panel.
-Locate the door lock motor and switch assembly. It is usually located near the door.
-Remove the old door lock motor and switch assembly and replace it with the new one.
-Replace the front panel and plug your washer back in.
4. Lid Switch Assembly.
If your washer won’t start, doesn’t fill with water or doesn’t spin, the lid switch assembly might be defective.
Replacing the lid switch is a pretty easy repair that most do-it-yourselfers can handle. The hardest part might be finding the right replacement part for your model of washing machine.
Your local appliance store will likely have the replacement part you need. Be sure to take your model number with you so they can help you find the right one. You might also be able to find the part you need online.
Installing the new lid switch is pretty straightforward. Just follow the instructions that come with the replacement part. If you get stuck, there are plenty of videos online that can show you how to do it.
With the new lid switch installed, your washer should work like new. Be sure to test it out before doing a load of laundry. That way, you’ll know everything is working properly.
5. Water Pump Belt.
What is it?
The water pump belt is a very important part of your Frigidaire washer. It helps to move the water from the tub to the drain hose. If this belt breaks, your washer will not be able to drain properly and may cause leaks.
How do I know if it needs to be replaced?
If you notice that your washer is not draining properly or if there are leaks, it is most likely due to a broken water pump belt.
How do I replace it?
Replacing the water pump belt is a relatively easy repair that can be done at home. First, you will need to unplug your washer and remove the back panel. Next, locate the water pump and remove the belt. Finally, install the new belt and reassemble your washer.
How to prevent it?
You can prevent this issue by regularly checking and replacing your washer’s water pump belt. It is also a good idea to keep an eye on the hoses and clamps that connect the pump to the tub and drain hose. These can become loose over time and cause leaks.
6. Coin Trap.
What is it?
The coin trap is a small, plastic cup that catches small items like coins that fall into the washer.
Why is it important?
The coin trap prevents these small items from clogging the drain pump and causing your washer to stop draining.
Why does it fail?
The coin trap can fail if it becomes cracked or broken, or if a small item becomes wedged in it and prevents the trap from closing properly.
How do I clean it?
You can clean the coin trap by removing it from the washer and emptying it out. If you notice that the coin trap is full of lint or other debris, you can rinse it off with warm water.
How to fix it?
If your coin trap is damaged, you will need to replace it. If a small item is preventing the trap from closing properly, you can try to remove the item with a pair of needle-nose pliers.
How to prevent it?
You can prevent your coin trap from becoming full of lint by regularly cleaning it out. You can also check the pockets of your clothes before washing them to make sure that no small items have fallen into them.
7. Drain Hose.
What is it?
The drain hose is a rubber or plastic hose that connects the washing machine to the drain.
Why does it matter?
If your washer is not draining, the first thing you should check is the drain hose. It may be clogged or kinked, preventing water from flowing out of the washer.
How do I fix it?
If the drain hose is clogged, you can try to clear it with a plunger or a plumbers’ snake. If the hose is kinked, you can try to straighten it out.
How to prevent it?
To prevent the drain hose from becoming clogged or kinked, make sure it is not installed too close to the wall or other obstacles. Also, be sure to clean out the lint trap in your washing machine regularly.
8. Door Lock.
What is it?
The door lock is a safety feature that keeps the washer door closed during the washing cycle.
If your Frigidaire washer doesn’t seem to be draining properly, one possible reason is that the door lock is defective. This can prevent the washer from spinning or draining properly.
If your washer won’t start, make sure that the door is locked. If it is, there may be an issue with the door lock itself. To test whether the door lock is working properly, try this:
-Open the washer door and press and hold the door switch for five seconds.
-If the door lock releases, then it’s working properly.
-If the door doesn’t release, then there may be an issue with the door lock itself and you should contact a qualified service technician.
How to fix it?
To test the door lock, open the washer door and try to turn the knob. If it doesn’t budge, or if you hear a click, then the door lock is probably defective. You’ll need to replace it.
To replace the door lock, follow these steps:
-Unplug the washer and shut off the water supply.
-Remove the screws that hold the door lock in place.
-Disconnect the wires from the door lock.
-Install the new door lock and reconnect the wires.
-Replace the screws and plug in the washer.
-Turn on the water supply and try the washer again.
How to prevent it?
You can prevent this problem by regularly cleaning the door gasket and making sure that there’s no buildup of detergent or other debris around the door. Additionally, if your washer has a lint filter, be sure to clean it before each load of laundry.
Frigidaire stacked washer not draining.
There are a few things that could be causing this problem. The first thing you should check is the pump. The pump could be clogged with lint or other debris. If the pump is clogged, it will not be able to properly drain the water from the washer.
Another possible cause of a Frigidaire stacked washer not draining is a faulty drain hose. If the drain hose is damaged, it will not be able to properly drain the water from the washer.
Finally, if the washer is not draining, it could be due to a problem with the drainage system. If there is a blockage in the drainage system, it will not be able to properly drain the water from the washer.
If your Frigidaire stacked washer is not draining, there are a few things you can do to fix the problem.
First, check the pump for clogs. If the pump is clogged, you can clean it with a brush or a vacuum cleaner. If the pump is not clogged, you can check the drain hose for damage.
If the drain hose is damaged, you can replace it with a new one. Finally, if there is a problem with the drainage system, you can call a plumber to fix the problem.
Frigidaire top load washer drain pump not working.
If your Frigidaire top load washer’s drain pump is not working, there are a few possible causes. The most likely cause is a clogged drain pump filter.
To check the filter, remove the drain hose from the back of the washer and check for any blockages. If you find a blockage, clean it out and try again.
Another possible cause is a faulty drain pump. To check the pump, remove the back panel of the washer and locate the pump. Check for any loose wires or other signs of damage. If you find anything, replace the pump and try again.
Frigidaire Washer not Draining Completely.
There are various reasons for a Frigidaire washer not draining completely. Some of the most common causes are a clogged drain hose or pump, and a defective door seal.
If your washer is not draining properly, you should first check the drain hose and pump for any clogs or blockages. You can also check the door seal to see if it is damaged or leaking. If you find that the problem is with the door seal, you can replace it with a new one.
How do you fix a Frigidaire Affinity washer that will not drain?
If your Frigidaire Affinity washer won’t drain, there are a few things you can try to fix the problem.
First, make sure that the washer is turned on and that the door is closed. If the washer is turned on but the door is open, it will not drain.
Next, check the drain hose to make sure it is not kinked or clogged. If the drain hose is kinked, it will not allow the water to drain properly.
If the drain hose is clear and the washer still won’t drain, the next step is to check the pump. The pump is responsible for pumping the water out of the washer. If the pump is not working properly, it will need to be replaced.
How Do You Run a Clean Cycle on a Frigidaire Affinity Washer?
The Frigidaire Affinity washer is a great machine, but like all washing machines, it needs to be cleaned from time to time. The good news is that running a clean cycle on your Frigidaire Affinity washer is a pretty easy process. Here’s what you need to do:
First, make sure that there is no laundry in the washer. Then, add one quart of white vinegar to the washer’s detergent dispenser. Next, run the washer on the hottest and longest cycle. Once the cycle is finished, run another cycle with just hot water to make sure all of the vinegar is removed from the machine.
How do you put a Frigidaire Affinity washer in diagnostic mode?
To put your Frigidaire Affinity washer in diagnostic mode, you will need to press and hold the “Start/Pause” button for five seconds.
After five seconds have passed, the washer will enter diagnostic mode. You can then use the buttons on the control panel to navigate through the various diagnostic tests that are available.
Once you have finished running the diagnostic tests, you can press the “Start/Pause” button again to exit diagnostic mode.
Related:
- 11 Reasons Why LG Washer Not Draining and {How to Fix}
- GE Washer Not Draining: How to Troubleshoot and Fix
Conclusion
If your Frigidaire washer is not draining, there are a few things you can do to try and fix the problem. First, check the drain hose to make sure it is not kinked or clogged. If it is, try unclogging it and see if that fixes the problem. If not, you may need to replace the drain hose.
Another possible cause of a Frigidaire washer not draining is a clogged pump. If this is the case, you will need to clean or replace the pump. Finally, if none of these solutions work, you may need to call a professional for help. Thanks for reading and good luck!