How to Reset a Whirlpool Washer: The Step-by-Step Guide

If you are having problems with your Whirlpool washer, the first thing you should do is reset it. This can often solve common issues. In this step-by-step guide, we will show you how to reset your Whirlpool washer quickly and easily. Keep reading for more information!

When should I reset my Whirlpool washing machine?

If your Whirlpool washing machine isn’t working properly, you may need to reset it. You should reset your washing machine if it:

  • doesn’t start
  • doesn’t spin
  • doesn’t drain properly
  • is making strange noises

Where is a reset button on Whirlpool washer?

There is no reset button on a Whirlpool washer. If your washer isn’t working properly, you may need to reset the circuit breaker or contact a service technician.

How to Reset a Whirlpool Washer

If your Whirlpool washer isn’t working properly, you may need to reset it. Follow these simple steps to do so:

1. Unplug the Washing Machine.

It is important to unplug the washing machine because if there is a power surge, it could damage the washing machine.

Also, if you are going to be away from home for an extended period of time, it is best to unplug the washing machine so that it does not use any electricity.

To unplug the washing machine, simply pull the plug out of the socket. If there is a cord wrap, unwrap it so that you can easily access the plug.

Once the washing machine is unplugged, press and hold the START/PAUSE button for five seconds. This will reset the washing machine.

If you have a front load washing machine, there will also be a door lock button. You will need to press and hold this button for five seconds as well.

After you have done this, the washing machine will be reset and you can now plug it back in and start using it again.

2. Reset the Circuit Breaker

If your Whirlpool washing machine isn’t working, one possible cause is that the circuit breaker has tripped. You can reset the circuit breaker by flipping it to the “Off” position and then back to the “On” position. If that doesn’t work, you may need to replace the circuit breaker.

Here’s how to reset the circuit breaker:

  • First, locate the circuit breaker box. It should be near your Whirlpool washing machine.
  • Once you’ve located the circuit breaker box, find the breaker that controls your washing machine. It will likely be labeled with something like “Washing Machine” or “Washer.”
  • Flip the breaker to the “Off” position, and then back to the “On” position.

3. Press a Combination of Buttons

If your Whirlpool washer doesn’t seem to be working properly, you may need to reset it. You can usually do this by pressing a combination of buttons on the control panel.

Consult your owner’s manual for specific instructions on how to do this for your model.

Generally, you will need to press and hold the “Start/Pause” button for about five seconds. This should reset the washer and get it working properly again.

4. With the Dial

If your Whirlpool washer doesn’t seem to be operating properly, you may need to reset it using the dial. Follow these steps:

First, unplug the washer from the power outlet.

Next, press and hold the “Start/Pause” button for five seconds.

Then, turn the dial to the “Rinse/Spin” setting.

Finally, plug the washer back into the power outlet and press the “Start/Pause” button. The washer should now be reset and should operate properly.

5. Open and Close the Lid

Closing the lid of your washer is important for two reasons. First, it helps to keep your washer clean by preventing things from falling into it. Second, it keeps laundry detergent and other chemicals from getting on your clothes.

If you have a top-loading washer, simply close the lid when you’re finished adding laundry. If you have a front-loading washer, there will be a door that you need to close.

Once the door is closed, your washer should start automatically. If it doesn’t, press the “Start” button.

You may need to press the “Start” button more than once if your washer doesn’t have an automatic sensor. For example, if you’re using a front-loading washer, you’ll need to press the “Start” button twice. Once when you close the door and again when the washer is full of water.

6. Press the Power and Program Buttons

If your Whirlpool washer isn’t working properly, resetting it can often fix the problem. You’ll need to press the Power and Program buttons at the same time to do this. Keep reading to learn how to reset your Whirlpool washer.

Resetting your Whirlpool washer is a pretty simple process. Just follow these steps:

First, make sure that the washer is turned off. Then, press and hold the Power and Program buttons at the same time for about three seconds. The Program button is usually located on the control panel near the power button.

Once you’ve done this, your washer should start going through a reset cycle. This may take a few minutes, so just be patient. Once the reset cycle is finished, your washer should be working properly again.

How to reset Whirlpool washer after power outage

If you have a Whirlpool washer, you may be wondering how to reset it after a power outage. Here are the steps you need to take:

-First, unplug the washer from the power outlet.

-Next, remove any clothing or other items from the washer.

-Then, open the washer door and leave it open for at least one minute.

-After that, plug the washer back into the power outlet and close the door.

-Finally, push and hold the “Start/Pause” button for five seconds.

How to reset Whirlpool washer Cabrio

If your Whirlpool Cabrio washing machine is not functioning properly, you may need to reset it. To do this, follow these steps:

Unplug the washer from the power outlet for 30 seconds. Plug the washer back in and lift and lower the lid six times within a 12-second period. The Whirlpool Cabrio washing machine will enter diagnostics mode.

Once in diagnostics mode, run a diagnostic test to identify the cause of the problem. After running the diagnostic test, the washer will automatically reset itself. If the problem persists, contact a Whirlpool service technician for further assistance.

How to reset Whirlpool washer door locked.

If your Whirlpool washer door is locked, you can reset it by following these steps:

First, unplug the washer from the power outlet.

Next, locate the door lock switch and push it to the “Unlock” position.

Finally, plug the washer back into the power outlet and press the “Start/Pause” button. The door should now be unlocked.

How to reset Whirlpool washer dryer combo.

If your Whirlpool washer dryer combo isn’t working properly, resetting it may fix the problem. To reset your Whirlpool washer dryer combo, follow these steps:

First, unplug the washer dryer combo from its power source. Then, open up the door and remove any clothes or laundry items from the drum. Next, locate the reset button on the control panel. Once you’ve found the reset button, press and hold it for five seconds.

After you’ve pressed and held the reset button for five seconds, your Whirlpool washer dryer combo should bereset and ready to use again. If your Whirlpool washer dryer combo still isn’t working properly after resetting it, you may need to call a repair technician.

How to reset Whirlpool washer duet.

If your Whirlpool washer duet needs to be reset, there are a few easy steps you can follow. First, unplug the washer from the power outlet. Next, locate the reset button on the back of the machine.

Once you’ve found the reset button, press and hold it for five seconds. After five seconds have passed, release the button and then plug the washer back into the power outlet. Finally, turn on the machine and run a test cycle to ensure that it’s working properly.

How to reset Whirlpool washer front load.

If your Whirlpool washer doesn’t seem to be running properly, resetting it may help. Here’s how:

First, unplug the washer from its power source for about five minutes. This will clear any residual power from the machine.

Next, locate the circuit breaker or fuse box and switch off the power to the washer. Leave it off for about 30 seconds, then switch it back on.

Once the power is back on, press and hold the “Start/Pause” button for about five seconds. This will reset the washer’s control panel.

How to reset Whirlpool washer top load.

Unplug the washer for one minute. Press and hold the START/RESET button for three seconds. Plug in the washer and open and close the lid six times within 12 seconds. The washer will run a quick test cycle after resetting.

If your Whirlpool washing machine doesn’t have a START/RESET button, unplug the washer for one minute. Press and hold the button that you use to start the washer for three seconds. Plug in the washer and open and close the lid six times within 12 seconds. The washer will run a quick test cycle after resetting.

How to reset Whirlpool washer touch screen.

If your Whirlpool washer touch screen is not responding, you can try resetting it. Here are the steps:

First, unplug the washer from the power outlet.

Next, press and hold the “Start/Pause” button for five seconds. After that, release the button and wait for a minute.

Then, plug the washer back into the power outlet and press the “Start/Pause” button once. The touch screen should now be reset and working properly.

If these steps do not work, you may need to replace the touch screen.

How to reset Whirlpool washer WTW4816FW2.

If your Whirlpool washer WTW4816FW doesn’t seem to be working properly, you may need to reset it. Here are the steps to do so:

First, unplug the washer from its power source for about five minutes. This will help clear any residual power that may be causing problems.

Next, locate the washer’s control panel. You’ll see a button labeled “Reset” near the top. Press and hold this button for about three seconds.

Once the washer has been reset, you can plug it back in and start using it again.

Related:

Conclusion

If your Whirlpool washer isn’t working properly, you may need to reset it. To do this, simply unplug the washer for 30 seconds and then plug it back in. If this doesn’t work, you may need to call a technician. Thanks for reading! We hope this blog post helped you out.