Try illuminating a carved pumpkin with tiny white lights and create your own Frankenstein-inspired creation from stacks of pumpkins and gourds.
- 35+ Creative Mason Jar Halloween Crafts To Upgrade Your Decor This Fall
- 65+ Awesome Halloween Front Door Decoration Ideas
- 51+ Creative Pumpkin Carving Ideas You Should Try This Halloween
- 51+ Cool Halloween Porch Decorations
- 51+ Spooky Halloween Party Decoration Ideas
- 51+ Cheap Indoor Halloween Decorating Ideas
- 27+ Creative Halloween Craft Ideas For Kids
- 31+ Scary Halloween Window Decoration Ideas
- 25+ Scary Halloween Decoration Ideas With Trash Bags
- 22 Scary Entrance Ideas For This Halloween
- 23+ Fun & Spooky Halloween Table Decoration Ideas
- 23+ Unexpected Halloween Decorating Ideas
- 56+ No-carve Pumpkin Decorating Ideas
- 74+ Spooky Black & White Halloween Decorating Ideas
- 29+ Best Halloween Wedding Theme Ideas
- 39+ Spooky Halloween Party Ideas
- 20+ Quick & Smart Last Minute Halloween Crafts & Hacks
- 24+ Animal Halloween Costumes For Kids & Adults
- 10+ Fun & Unique Homemade Halloween Costume Ideas
- 50+ Halloween Costumes For Adults
- Halloween Books For Kids
- Great Halloween Books For Preschoolers
- Cheap Homemade Halloween Costumes
- Halloween Costumes For Families
- Coupe Costume Ideas
- Scary Halloween Makeup Ideas
October is certainly a great month of the year. The nights are crisp and cool; the days are usually sunny and full of many activities, such as putting the garden to bed, watching the leaves change color and, of course, getting ready for Halloween.
If you’re looking for new and imaginative ways to carve your pumpkins, take a look at the 51+ ideas listed below for unique pumpkin creations.
Light up your porch with these creative pumpkin lanterns. Rather than carve a face, drill small holes into a pumpkin. Turn the pumpkin on its side, and use a keyhole saw to carve out a round opening in the bottom large enough to enable your hand to reach inside the pumpkin.
Use a dry-goods scoop or a spoon to remove the flesh and seeds. Scrape away the inner wall of the pumpkin until it’s about 1/4- to 1/8-inch thick.
Then place the pumpkin right-side up. Using a 1/4-inch drill bit, drill holes randomly across the skin or (using tape as a guide) create a pattern.
Place a string of tiny white lights through the bottom of the pumpkin, and insert one bulb into each hole, pushing bulbs through so that they extend slightly from the holes.
Bunch the remaining lights together inside the pumpkin, making sure that the cord and plug run out from the bottom of the pumpkin. Plug into a socket or a sturdy extension cord, stand back and watch the magic occur.
These twinkling pumpkins make fantastic lights for entertaining on an autumn evening and are stunning as either indoor or outdoor displays.
If you make these in quantity and place them on a Halloween buffet table or next to your front door, you’ll have a most unique Halloween decoration.
If you plan to incorporate carved pumpkins into your Halloween decor, remember that once a pumpkin is carved, it will rot quicker than an uncarved pumpkin.
Use the variety of pumpkins and gourds from the pumpkin patch to construct your own pumpkin creatures. Here’s your chance to play Dr. Frankenstein this Halloween and give “life” to stacks of pumpkins, gourds and squashes.
You’ll only need to carve the heads; if the body parts you select don’t remain secure when stacked on top of one another, level off the bottom, then hammer wooden dowels into the flesh to assemble them.
Before attaching the head, insert a battery-operated light to provide illumination, or insert a jelly jar wrapped with white lights and plug your creature into an outside electrical outlet or heavy-duty extension cord.
Pumpkins have long been associated with Halloween. During this time you will see all sorts of design and decorations all related to pumpkins. However, have you taken the time to consider why this is so?
The idea stems from the Irish who emigrated to the United States and brought along their customs. The festival of Samhain was used to mark the passage into winter.
The Irish would carve faces in turnips and put candles in them to ward off evil spirits and provide light to their loved ones. As this carried on, turnips were replaced to pumpkins, and the tradition has carried on till today.
Pumpkin carving tools
There are several types of tools you can use to carve a pumpkin, depending on how detailed you want your patterns. You will need a hand saw to break through the hard outer shell of the pumpkin.
If a hand saw is not available, a paring knife will do fine. You will also need a scoop to hollow out the pumpkin. Another tool that may come in handy is an etcher.
These are available in different sizes to enable you to carve out the finer details on to your pumpkin. All these tools are available for purchase in most stores and websites. A standard carving tool kit costs around $5.
What can you carve besides a pumpkin?
Although pumpkins are considered the norm, there are also other items that you can use to create Halloween decorations. Here is a list of suitable alternatives.
Watermelons are a great alternative to pumpkins. They have a hard outer shell and a fleshy interior. They also tend to be much easier to carve as compared to pumpkins.
Butternuts can also make for excellent decorations for Halloween. They are closely related to pumpkins and are pretty much the same when it comes to consistency. The advantage of using butternuts is that they are available in all shapes and sizes, allowing you to experiment with many ideas.
Aside from the above, you can also use pineapple, oranges, and capsicum. These, however, are not that common since they do not have hard outer shells and tend to fray much faster.
How do you cut a cool pumpkin?
There are three main rules to follow when it comes to cutting pumpkins. Rule one is to ensure that you have an ideal workspace.
Rule two is to ensure that you have the correct tools. Rule three is that you should always draw before you carve. There is no precise science when it comes to carving pumpkins.
How do you empty a carved pumpkin?
Once you are done with your design, use a scoop to empty the flesh inside the pumpkin. The proper way to do this is to cut a hole big enough that will allow you space to work.
Cut the side opposite to where the stalk is and work your way inside. You can also use a tablespoon to empty the flesh. Always work from the center and advance towards the edges.
- Dollar Store Halloween Decorations
- Halloween Topiary Ideas
- Farmhouse Halloween Decor Ideas
- Gothic Halloween Decor Ideas
- Halloween Trophy Ideas
- Halloween Tombstone Ideas
- Scary Halloween Decoration Ideas
- Lighting Ideas For Halloween Night
- Haunted House Ideas For Halloween
- Halloween Wreath Ideas
- Vintage Halloween Decoration Ideas
- Halloween Outdoor Decoration Ideas
When should you carve a pumpkin?
You can curve your pumpkins two days before Halloween. It will allow the pumpkin to dry out and make the design more elaborate.
Can you carve both sides pumpkin?
Pumpkins can be carved on both sides to create different patterns. You can use the same techniques as with larger pumpkins, but some level of skill is required. You should only attempt it when you are confident enough.
Can you carve small pumpkins?
Pumpkins come in a variety of sizes, all of which can be carved as decorations for Halloween. The only difference is that you have a smaller space to work.
Unique pumpkin carving ideas
With the commercialization of Halloween, a lot of changes have come into the tradition. You are now able to get pre-carved pumpkins and use them as decorations for your house. If you prefer to diverse from the norm, below are some unique ideas that you can use this coming Halloween.
Rather than hollow out the entire pumpkin, you can use the flesh within to provide contrast to the shape that you want to create. You can carve the Transylvania silhouette or the grim reaper on to your pumpkin to achieve a unique look.
Another idea you can explore is the layering technique. It involves using more than one pumpkin to create intricate designs for your Halloween decorations. Different sized pumpkins can be used to achieve this look, and the final design is entirely up to you.
You can also use additional materials rather than the pumpkin itself. Similar to how you make a snowman in winter, composite materials are great additions to create unique looking decorations. Everyday items you can use include buttons, stencils, and so on. The possibilities are endless.
Scary pumpkin carving ideas
Ghosts, tombstones, epitaphs are all symbols that are common in Halloween. These can make for very amazing designs when carving your pumpkin.
Employ some of your art skills and see what you can come up with for this year’s Halloween.
One idea that you can use is to create zombie eyes with your pumpkins. For this, you will require some paint and a set of carving knives to come out with the finer details of the design. You will also need a pumpkin that is more spherical to mimic real eyes much better.
You can also use multiple pumpkins to create a composite design. Carve out a huge mouth on the bigger pumpkin with teeth included and stick a smaller pumpkin in the mouth. It will surely add to the scare factor that you want for your party.
Funny pumpkin carving ideas
Halloween does not need to be all about monsters and ghouls. You can also bring out your humorous side through your carving techniques.
You can carve out the symbols of everyday superheroes or cartoons in your pumpkins to have them as exhibits at your party. Stencils for these can be obtained at most stores. All you need is to trace the pattern on your pumpkin and carve away.
Big pumpkin carving ideas
These are the best when it comes to creating awesome designs. You have a large area to work with and can truly express your artistic prowess.
You need not be an artist of DaVinci’s level to achieve something incredible. Some ideas you can use include carving the image of a witch flying through the night sky; broom, moon, and bats all included.
Another way you can use your giant pumpkin is to have it as the main background for other smaller pumpkin patterns. You can hollow out the front to resemble a television screen, and then place the different characters in it.
Pumpkin carving faces
Over the years, there have been many designs for pumpkin faces that have been introduced. There are now stencils that you can buy for any imaginable face design that you need.
All you need to do is trace out the image on to your pumpkin and carve along the lines. You also get a guide on how to go about creating the face along with your purchase.
Halloween is only a few weeks away. With the above, you are now ready to go about carving your pumpkins like a pro.