Last Updated on September 6, 2022 by Kimberly Crawford
If your LG washer is not draining, don’t worry – you’re not alone! This is a common problem that many people experience. In this blog post, we will discuss some of the most common causes of this issue and how to fix it. We will also provide some tips on how to prevent this from happening in the future.
Related: 7 Washing Machine Brands To Avoid and 3 Most Reliable Brands
LG Washer Not Draining: Causes & How to Fix
1. Door Lock Switch.
If your washer is not draining, the door lock switch could be the issue. The door lock switch is located on the control panel of your washer.
Why does it fail?
The door lock switch can fail due to a power surge, age, or extended use.
How do I fix it?
To test if the door lock switch is the issue, unplug your washer and open up the control panel. Locate the door lock switch and test it with a multimeter. If the door lock switch is not working, you will need to replace it.
To do this:
First, unplug your washer and remove the control panel. Locate the door lock switch on the control panel and remove it. Install the new door lock switch and reattach the control panel. Finally, plug in your washer and test it to see if it is working properly.
2. Door Lock.
The door lock on an LG washer is a safety feature that prevents the washer from operating when the door is open.
Why does it fail?
The door lock can fail due to a power surge, which can cause the door lock to become damaged or fused. The door lock may also fail due to a manufacturing defect.
How do I fix it?
If the door lock is damaged or fused, it will need to be replaced. If the door lock is defective, LG will provide a free repair.
What are the symptoms of a failing door lock?
The most common symptom of a failing door lock is the washer not starting.
The door lock may also make a clicking sound when it fails to engage. Additionally, the door may not close properly if the door lock is damaged or defective.
3. Lid Switch.
The lid switch is a safety device that keeps the washer from spinning when the lid is open. If your washer won’t spin, but will agitate, this could be the problem.
Why does it fail?
There are a few reasons why the lid switch might fail. The most common is that it gets worn out from use. Another possibility is that something is caught in the switch, preventing it from engaging.
How to fix it:
Check to see if the lid switch is working properly. If it isn’t, you will need to replace it.
To replace the lid switch, you will need to:
- Disconnect the washer from the power source.
- Remove the back panel of the washer.
- Locate the lid switch and disconnect it from the wiring harness.
- Remove the old lid switch and install the new one.
- Reconnect the wiring harness to the new lid switch.
- Replace the back panel on the washer.
- Reconnect the washer to the power source and test it to make sure it is working properly.
4. Unbalanced load.
If your washer is not draining, it could be due to an unbalanced load.
The reason this happens is that the washer can’t spin properly if the load is unbalanced. This can cause the water to not drain out of the washer properly, and can also lead to leaks.
To fix this problem, you’ll need to redistribute the load in your washer. You can do this by taking some clothes out of the washer and adding more clothes to even out the load.
Once you’ve done this, your washer should be able to spin properly and drain the water correctly.
Related: How to Balance a Washing Machine – The Ultimate Guide
5. Not Level.
If your washer is not draining, it could be because it’s not level.
This can happen for a variety of reasons. Maybe you just moved into a new house and haven’t had a chance to level out your appliances yet. Or maybe your washer has been jostled around and is no longer level.
Whatever the reason, if your washer is not draining, one of the first things you should check is whether or not it’s level.
Here’s how:
First, take a look at your washing machine. Is it sitting level on the floor? If it’s not, then that could be why your washer isn’t draining properly.
If your washer is not level, there are a few ways you can fix it.
You can try adjusting the legs of your washing machine until it is level. This is usually a pretty easy fix.
If adjusting the legs doesn’t work, or if your washing machine doesn’t have adjustable legs, you can try putting a piece of wood under one side of the machine. This will help to level it out.
Once you’ve leveled out your washing machine, check to see if the problem is fixed.
6. Improper Drain Height.
If your washing machine is not draining properly, it could be due to the drain height. The drain hose should be elevated at least four inches above the floor for proper drainage.
If it is not, the water will not be able to drain properly and will pool in the washer.
There are a few things you can do to fix this problem. One is to adjust the feet of the washer so that the drain hose is elevated properly. Another is to use a different drain hose that is designed for higher drains.
7. Drain Pump Filter.
The drain pump filter is located on the front of your LG washer, behind a small access panel. The purpose of the drain pump filter is to catch lint, hair, and other debris that could clog your washer’s drainage system.
Over time, the drain pump filter can become clogged with debris, which can cause your LG washer to not drain properly.
If your LG washer is not draining properly, one possible cause is a clogged drain pump filter. To clean the drain pump filter:
- Unplug your LG washer from the power outlet.
- Remove the small access panel on the front of the washer. The location of the access panel will vary depending on your model of LG washer.
- Pull out the drain pump filter from its housing.
- Rinse the filter with clean water to remove any debris.
- Replace the filter and access panel, and plug your washer back into the power outlet.
8. Drain Hose.
If your washer is not draining, the first thing you should check is the drain hose. The drain hose is responsible for carrying water from the washer to the drainage pipe.
If there is a blockage in the hose, it will prevent water from flowing out of the washer. To clear a blockage, simply remove the hose and flush it out with water. If the hose is damaged, you will need to replace it.
To replace the hose:
-Turn off the water to the washer.
-Disconnect the hose from the back of the washer.
-Remove the old hose and replace it with a new one.
-Reconnect the hose to the back of the washer.
-Turn on the water to the washer.
9. Drain Pump.
If your washer is not draining, the first thing you should check is the drain pump. The drain pump helps to remove water from the washer. If the drain pump is not working, then the water will not be able to be removed from the washer.
A few things can cause the drain pump to not work properly. One thing that can cause the drain pump to not work properly is if the drain pump is clogged.
Another thing that can cause the drain pump to not work properly is if the power to the drain pump is not working. If you have checked the drain pump and it is not working, then you will need to replace the drain pump.
To replace the drain pump, you will need to:
- Unplug the washer from the power outlet.
- Remove the back panel of the washer.
- Locate the drain pump.
- Remove the hose from the drain pump.
- Remove the two screws that hold the drain pump in place.
- Pull out the old drain pump.
- Put the new drain pump in place.
- Replace the two screws that hold the drain pump in place.
- Reconnect the hose to the drain pump.
- Replace the back panel of the washer.
- Plug the washer back into the power outlet.
10. Water Pump Belt.
The water pump belt connects the motor to the water pump. If the belt is broken, the washer will not be able to pump water.
To check if the belt is broken:
- Unplug the washer from the power outlet.
- Remove the front panel of the washer.
- Locate the water pump.
- Inspect the water pump belt for signs of wear or damage.
If the belt is broken, it will need to be replaced. Follow these steps to replace the water pump belt:
- Remove the old belt from the water pump.
- Install the new belt onto the water pump.
- Reconnect the front panel of the washer.
- Plug the washer back into the power outlet.
11. Wrong detergent.
If you have an HE (high efficiency) washer, you should only use HE detergent. If you use regular detergent, it can cause suds to build up in your washer and not drain properly. Check your owner’s manual to see what type of detergent to use.
12. Coin Trap.
The coin trap is a small, plastic cup-shaped piece that sits under the washing machine’s agitator. It’s there to catch things like coins, buttons, and other small objects that might fall into the washer.
If your LG washer isn’t draining properly, one of the first places to check is the coin trap. Over time, the coin trap can become clogged with coins, buttons, and other small objects. If this happens, your washer won’t be able to drain properly.
To clean the coin trap, simply remove it from the washing machine and empty it out. Be sure to check for any coins or other objects that might be stuck in the trap. If you find any, use a small screwdriver or another tool to remove them.
Once the coin trap is clean, reattach it to the washing machine and run a test load of laundry. If the washer still doesn’t drain properly, there may be another issue at play. But if it does, your LG washer should be good as new!
Related:
LG washer not draining and making noise?
1. Drain hose.
If the hose is clogged, the washer will not be able to drain properly and will make a noise when trying to operate.
How to fix it?
Unplug the washer and remove the drain hose from the back. Clean any debris that may be blocking the hose.
Reattach the hose and plug in the washer. Try running a cycle to see if it is draining properly.
2. Pump.
If the pump is not working properly, it can make a noise and also cause the washer to not drain properly.
How to fix it?
If the pump is not working properly, you can try cleaning it out. First, unplug the washer and then remove the hose from the back of the washer.
Next, use a garden hose to flush out any debris that may be in the pump. Once you have done this, reattach the hose and plug the washer back in.
If the pump still is not working properly, you may need to replace it.
LG washer not draining completely?
There are a few things that could be causing this. Check the following:
1. Coin trap.
If your washer is not draining completely, there’s a good chance that a coin or other object is blocking the drainage hose.
The coin trap is located at the bottom of the washer tub, and it’s where the water drains out. To clean it out, you’ll need to remove the bottom panel of your washer.
Once you’ve done that, you should be able to see the coin trap. Use a flashlight to look for any coins or other objects that might be blocking the drainage hose. If you find anything, use a pair of pliers to remove it.
Once you’ve cleared the coin trap, replace the bottom panel and run a test load of laundry.
2. Clogged drain hose.
If your washer is not draining properly, one of the first things you should check is the drain hose.
Over time, lint and other debris can build up in the hose, causing a blockage. If your drain hose is clogged, it will need to be cleaned out before your washer will drain properly.
To clean out your drain hose:
-Disconnect the hose from the back of your washer.
-Run water through the hose to flush out any debris that may be stuck in it.
-Once the water is running clear, reconnect the hose to your washer and run a test cycle to see if it is draining properly.
3. Door Lock.
If your washer doesn’t seem to be draining properly, the first thing you should check is the door lock.
The door lock is what keeps the water from draining out of the washer while it’s in use. If the door lock is broken, then the washer won’t be able to hold onto any and it will just drain right out.
How to fix it?
If the door lock is broken, then you’ll need to replace it. You can do this yourself if you’re handy with tools, or you can call a repairman to do it for you. Either way, it’s a pretty simple fix and shouldn’t take more than a few minutes to do.
4. The washing machine’s pump may be defective.
If your washer is not draining completely, the first thing to check is the washing machine’s pump. The pump may be defective. If the pump is defective, it will need to be replaced.
LG Washer Drain Pump Won’t Stop?
If your LG washer drain pump won’t stop, there are a few possible causes. The most common cause is a clog in the drain hose or pump. Other possible causes include a faulty door switch or control board.
To fix a clog, start by unplugging the washer and removing the drain hose from the back. Next, use a plunger or pliers to clear any obstruction in the hose. If that doesn’t work, you may need to replace the drain pump.
To fix a faulty door switch or control board, start by unplugging the washer and checking the door switch for continuity. If the switch is faulty, replace it. If the control board is faulty, replace it with a new one.
LG washer not draining OE code?
Here are some possible causes and how to fix them.
One possible cause of your LG washer not draining could be a blockage in the drain hose or pump. To check for this, first make sure that the hose is not kinked or bent.
Then, remove the hose from the washer and check for any debris that may be blocking it. If you find any, use a plunger or pliers to remove it.
Another possible cause of your washer not draining could be a problem with the drain pump. To check this, first make sure that the power to the washer is turned off. Then, open up the washer and locate the drain pump.
Check for any debris or obstruction around the pump that could be causing it to not work properly. If you find anything, remove it and see if that fixes the problem.
LG Washer Won’t Stop Draining Water?
If your LG washer won’t stop draining water, there are a few possible causes. Here’s how to troubleshoot and fix the problem.
One possible reason why your LG washer won’t stop draining water is because the drain hose is clogged. Check the drain hose for any blockages or kinks. If the drain hose is clear, the next step is to check the drain pump filter for any debris.
If your LG washer still won’t stop draining water, it could be because of a faulty drain pump.
To replace the drain pump, follow these steps:
- Unplug the washer from the power outlet.
- Remove the back panel of the washer.
- Disconnect the drain pump wiring harness.
- Remove the screws holding the drain pump in place.
- Install the new drain pump and reconnect the wiring harness.
- Replace the back panel and screw it in place.
- Plug the washer back into the power outlet and test it out.
How do I test my LG washing machine drain pump?
To test your LG washing machine drain pump, first disconnect the power to the machine. Next, remove the drain hose from the back of the washer and place it into a bucket.
Be sure that the bucket is large enough to catch all of the water that will be drained from the washer. Now, turn on the machine and let it run through a complete cycle.
If the pump is working properly, you should see a steady stream of water flowing from the hose into the bucket. If the pump is not working properly, you will either see no water flowing from the hose, or you will see a trickle of water that quickly stops. If your pump is not working properly, you will need to replace it.
How much does it cost to fix an LG washer drain pump?
It depends on the severity of the problem. If the drain pump is completely broken, it will need to be replaced. This can cost anywhere from $100 to $200. However, if the problem is only a clog, then it may only cost around $50 to have it professionally cleaned.
How to drain water from LG washing machine manually.
First, unplug your washing machine from the power outlet.
Second, locate the drain hose at the back of the washing machine.
Third, place a bowl or bucket under the end of the drain hose.
Fourth, use a flathead screwdriver to loosen the clamp that secures the drain hose to the washing machine.
Fifth, carefully remove the drain hose from the washing machine.
Sixth, allow the water to drain into the bowl or bucket.
Seventh, once the water has finished draining, replace the drain hose and clamp it securely in place.
Eighth, plug your washing machine back into the power outlet and turn it on. Your washing machine is now ready to use!
Related: How to Drain Water from Washing Machine: The Definitive Guide
Conclusion
If your LG washer is not draining, there are a few potential causes. First, check the drain hose to make sure it is clear of any blockages. If the hose is clear, then the issue may be with the drain pump.
Take a look at the drain pump to see if there are any signs of damage or debris. If the pump looks damaged, it will need to be replaced. If there is debris in the pump, you can try to clean it out and see if that fixes the issue.
If neither of these solutions works, then you may need to call a professional for help. Thank you for reading! We hope this information was helpful.