Last Updated on August 21, 2022 by Kimberly Crawford
If your KitchenAid refrigerator ice maker isn’t working, you’re not alone. This is a common problem that can often be fixed with a few simple steps. In this blog post, we will walk you through the process of fixing your KitchenAid refrigerator ice maker. We will also provide some tips to help prevent this problem from happening in the future.
Related: 7 Refrigerator Brands To Avoid and 5 Most Reliable Brands
Reasons Why KitchenAid Refrigerator Ice Maker Not Working?
1. Freezer Temperature.
The first thing you should check is the freezer temperature. Ice makers need a certain amount of cold to work properly, so if your freezer isn’t set cold enough, it could be the reason why your ice maker isn’t working. The ideal freezer temperature is between 0°F and -18°F.
If your freezer is set too cold, it could be causing your ice maker to work overtime and not have enough time to properly freeze the water. To fix this, simply adjust the freezer temperature and wait 24 hours to see if the ice maker starts working again.
If your freezer temperature is set correctly and you’re still having trouble with your ice maker, the next thing to check is the water supply.
2. Water supply line.
If the ice maker is not working, the water supply line might be frozen. Check the water line for any kinks or blockages.
If the line is frozen, thaw it out with a hair dryer or heat gun. If the line is clear, make sure that the water valve is turned on all the way.
3. Ice maker turned off.
Check the power to the ice maker. Is the circuit breaker tripped or has a fuse blown? Check for loose wires. Look for signs of moisture or condensation.
If there is no power, check the home’s main electrical panel to see if a fuse has burned out or if the circuit breaker needs to be reset.
4. Water Inlet Valve.
If your KitchenAid refrigerator’s ice maker is not working, one possible reason is a faulty water inlet valve.
This valve controls the flow of water into the ice maker, and if it’s not functioning properly, it can prevent the ice maker from getting enough water to make ice.
Why does it fail?
There are a few reasons why the water inlet valve might fail. The most common reason is simply wear and tear; over time, the valve can become corroded or clogged, preventing it from opening properly.
Another possible reason is that the power to the valve has been interrupted; if there’s no power flowing to the valve, it can’t open and allow water to flow through.
How can I fix it?
If you suspect that your water inlet valve is the problem, you’ll need to replace it. This is a relatively easy repair that you can do yourself, and it should only take a few minutes.
First, locate the water inlet valve. It’s usually located on the back of the refrigerator, near the water line. Once you’ve found it, turn off the water supply to the refrigerator. Then, use a wrench to loosen the nut that secures the inlet valve to the water line.
Once the nut is loose, you can remove the old water inlet valve and replace it with a new one. Be sure to Tighten the new valve securely, then turn on the water supply and check to see if the ice maker is working properly.
How can I prevent it from happening again?
There are a few things you can do to help prevent the water inlet valve from failing in the future.
First, be sure to clean it regularly; over time, sediment and other debris can build up and prevent the valve from opening properly. You can use a toothbrush or other small brush to clean around the valve.
5. Water pressure.
Check your water pressure to be sure it is above 30 psi. If it is, then the next step is to check the fill tube for kinks.
The fill tube brings water to the ice maker and if it is kinked, it will not get enough water and the ice maker will not work properly.
6. Icemaker Module.
The icemaker module is located in the freezer compartment and has a motor that turns the ice ejector blades to push the ice cubes out of the mold.
It also has a shutoff arm that stops the flow of water to the mold when it is full of ice.
Why does it fail?
The icemaker module can fail due to a clogged shutoff arm, failed motor, or broken ice ejector blades.
How do you fix it?
If your refrigerator’s icemaker is not working, first check to make sure that the shutoff arm is in the “on” position.
If it is, then the problem is likely with the icemaker module itself. To test the module, first disconnect power to the refrigerator. Then remove the ice bucket and bail arm from the freezer compartment.
Next, unscrew the two screws that hold the icemaker module in place and pull it out. Inspect the shutoff arm for clogs and clean as necessary. Also check the ice ejector blades for breakage and replace if necessary.
Finally, check the motor for damage and replace if necessary. Once you have replaced all of the defective parts, reassemble the icemaker module and reconnect power to the refrigerator.
How can I prevent it from happening again?
To prevent the icemaker module from failing again, be sure to keep the shutoff arm clean and free of clogs.
Also, be careful not to damage the ice ejector blades when removing them for cleaning. Finally, if you must replace the motor, be sure to get one that is compatible with your refrigerator model.
7. Ice Level Control Board.
The ice level control board is responsible for monitoring the ice level in the bucket and activating the ice maker to produce more ice when needed. This part is located inside the refrigerator, near the ice maker.
Why does it fail?
The ice level control board can fail due to a power surge or because of a faulty sensor. If the ice level control board is damaged, it will need to be replaced.
What are the symptoms?
If the ice level control board fails, the ice maker will not produce ice. The refrigerator may also display an error code.
How to fix it?
If your refrigerator’s ice maker is not working, it may be because this board has failed. To test it, simply unplug the refrigerator and remove the ice bucket. Locate the board and test it for continuity with a multimeter. If there is no continuity, then you will need to replace the board.
How can I prevent it from happening again?
To prevent the ice level control board from failing, you should keep your refrigerator plugged into a surge protector.
You should also avoid making sudden power surges to the refrigerator, such as by plugging in or unplugging appliances quickly.
8. Door Switch.
About this part: The door switch signals the ice maker to begin its cycle when the door is closed.
If this switch is defective, it won’t signal the ice maker to make ice. This is a very common issue.
Why does it fail?
The door switch is a mechanical device. Over time, the switch can become worn out or damaged from use.
How do you fix it?
To check if your door switch is working properly, start by unplugging your refrigerator and removing the panel on the inside of the fridge door.
Locate the door switch and use a multimeter to test it for continuity. If the switch does not have continuity, it will need to be replaced.
How can I prevent it from happening again?
There isn’t much you can do to prevent this issue. However, making sure that your fridge door is always closed properly can help prolong the life of the door switch.
9. Icemaker Mold Thermostat.
The icemaker mold thermostat monitors the temperature of the ice mold (and terminates
ice production when the ice mold reaches a certain temperature). If your refrigerator’s
icemaker isn’t working, the problem could be with this part. Check to see if it needs to be replaced.
Why does it fail?
The icemaker mold thermostat can fail because of a power surge or because the refrigerator
was turned off for too long and the ice melted, causing the thermostat to trip. If this happens,
the ice maker will need to be replaced.
How do I replace it?
To replace the icemaker mold thermostat, you’ll need to:
-Disconnect the power to the refrigerator.
-Remove the ice maker from the refrigerator.
-Remove the thermostat from the ice maker.
-Install the new thermostat in the ice maker.
-Replace the ice maker in the refrigerator.
-Reconnect the power to the refrigerator.
10. Icemaker Switch.
The icemaker switch controls power to the ice maker and water dispenser. If this switch is in the “Off” position, neither the ice maker nor water dispenser will work.
Why does it fail?
Over time, the icemaker switch can wear out or become damaged.
What are the symptoms?
If the icemaker switch is not working, your ice maker and water dispenser will not work.
How do you fix it?
Check to see if the icemaker switch is in the “Off” position. If it is, move it to the “On” position and wait 24 hours for the ice maker to cycle and produce ice.
11. Water Filter.
The water filter is located in the back, right-hand side of your refrigerator.
Why does it fail?
Clogged water filters are the most common reason your KitchenAid ice maker might not be working. A clogged filter prevents water from flowing through to the ice maker, and as a result, no ice is produced.
What can you do about it?
Luckily, fixing a clogged water filter is a relatively easy fix. Simply locate your water filter and replace it with a new one. We recommend replacing your water filter every six months to ensure optimal performance of your ice maker.
To replace it:
-Remove the old filter by turning it to the left.
-Insert the new filter into the housing and turn it to the right until it locks into place.
-Flush water through the new filter for about three minutes to remove any air bubbles.
-Enjoy your nice, cold glass of water! (or ice, once the ice maker is working again)
Related:
KitchenAid ice maker not working but water does?
Here are four possible causes, and their solutions.
1. The water inlet valve.
This is the valve that controls the flow of water into your ice maker. If it’s not working properly, it could be because it’s frozen or clogged.
To fix this, simply thaw out the valve with a hair dryer or a heat gun. If that doesn’t work, you may need to replace the valve.
2. The ice maker itself.
If your ice maker is not working, it could be because it’s dirty or there’s something blocking the ice tray. To clean your ice maker, simply remove it from your freezer and wash it with warm soapy water.
If there’s something blocking the ice tray, you can try using a toothpick or a paperclip to clear it out.
3. The freezer temperature.
If your freezer is not set to the proper temperature, your ice maker will not work properly. To fix this, simply adjust the thermostat to the correct setting.
4. The water filter.
If your ice maker is not working, it could be because your water filter is dirty or clogged. To clean or replace your water filter, simply follow the instructions in your owner’s manual.
KitchenAid ice maker not filling with water?
You’re not alone. Here are some possible causes and solutions to help you get your ice maker up and running again.
If your KitchenAid ice maker is not filling with water, there are a few possible reasons why. First, check to make sure that the ice maker is turned on and that there is power to it.
If the ice maker is turned on and there is still no water, the next thing to check is the water line. If the water line is frozen, thawed it out with a hair dryer or a heat lamp.
If the ice maker is turned on and there is power to it, but it still isn’t filling with water, the problem may be with the water inlet valve. The water inlet valve is what supplies water to the ice maker.
If the valve is defective, it may not be allowing water to flow into the ice maker. To test the water inlet valve, disconnect power to the ice maker and then turn on the water supply.
If water flows through the valve, then the valve is not the problem. If water does not flow through the valve, then the valve will need to be replaced.
Another possible reason why your KitchenAid ice maker may not be filling with water is because of a clogged filter. The filter traps impurities in the water and over time it can become clogged.
To clean the filter, remove it from the ice maker and soak it in a solution of vinegar and water. Once the filter is clean, put it back in the ice maker and see if that solves the problem.
KitchenAid ice maker not working and red light blinking?
Here are some possible causes and solutions.
One possibility is that the ice maker is not getting enough water. Check to make sure the water line is connected and turned on, and that there is no blockage in the line.
Another possibility is that the freezer temperature is too high. Adjust the thermostat according to the manufacturer’s instructions.
If neither of these solutions solves the problem, it is possible that there is a problem with the ice maker itself. Check for any error codes and consult the manufacturer’s troubleshooting guide. If all else fails, call a qualified appliance repair technician.
KitchenAid ice maker not working after power outage?
Here are some possible causes and solutions for you.
-If your ice maker is not working after a power outage, the first thing you should check is the power supply. Make sure that the ice maker is plugged into a working outlet. If the outlet is not working, try plugging the ice maker into another outlet.
-Another possible cause of an ice maker not working after a power outage is a tripped circuit breaker. Check your home’s circuit breaker box and reset any tripped breakers.
-If your ice maker still isn’t working after checking the power supply and resetting any tripped circuit breakers, there may be an issue with the ice maker itself. If this is the case, you’ll need to contact a KitchenAid service technician for assistance.
KitchenAid 5 door refrigerator ice maker not working?
There are a few things that could be causing this. Let’s take a look at some of the most common causes and solutions.
One possible reason why your KitchenAid ice maker might not be working is because the water supply line is frozen. This can happen if the water pressure in your home is low or if there’s a leak in the supply line. To fix this, you’ll need to thaw out the supply line and make sure there are no leaks.
Another common issue is that the ice maker’s bail arm is not in the correct position. The bail arm is what tells the ice maker when to stop making ice. If it’s in the wrong position, it can prevent the ice maker from working properly. To fix this, simply move the bail arm to the correct position.
If neither of these solutions fixes the problem, then you may need to replace the ice maker assembly. This is a more involved repair and you’ll need to consult your KitchenAid refrigerator’s manual for instructions on how to do it.
How do I reset my KitchenAid ice maker?
There are a few things you can do to reset your KitchenAid ice maker. First, unplug the ice maker from the power source. Next, remove the ice bucket and any loose ice from the unit. Finally, clean the unit according to the manufacturer’s instructions.
Is there a reset button on KitchenAid refrigerator ice maker?
The answer is yes! If your ice maker isn’t working properly, a reset button may be the solution.
To reset your KitchenAid refrigerator ice maker, simply press and hold the reset button for three to five seconds. You should then hear a click, and the ice maker should begin to work again.
Where is the ice maker switch on KitchenAid fridge?
The ice maker switch on KitchenAid fridges is located in the freezer compartment. To access it, open the freezer door and look for the switch near the top of the fridge.
If you can’t find it there, check the owner’s manual for your specific model. Once you’ve found the switch, flip it to the “on” position and wait for the ice maker to start producing ice.
If your KitchenAid fridge doesn’t have an ice maker switch, then it’s probably not equipped with an ice maker. However, you can still add one to your fridge by purchasing an ice maker kit from a local appliance store or online retailer.
Follow the instructions that come with the kit to install the ice maker in your fridge. Once it’s installed, flip the switch to the “on” position and wait for the ice maker to start producing ice.
How do I reset the control panel on my KitchenAid refrigerator?
If your KitchenAid refrigerator’s control panel isn’t working properly, you can reset it by following these steps:
First, unplug the refrigerator from its power source. Then, remove the control panel cover by gently prying it off with a flathead screwdriver. Once the cover is off, locate the reset button on the control panel.
Press and hold the reset button for about 30 seconds. After that, replace the control panel cover and plug the refrigerator back in. The control panel should now be reset and working properly.
How do I turn on the KitchenAid ice maker?
To turn on your KitchenAid ice maker, first make sure that it is properly plugged into an outlet. Once it is plugged in, press the power button to turn it on.
You may also need to press the reset button if the ice maker has been recently installed or if it has been turned off for a long period of time.
If the ice maker is still not working, check the water supply to make sure that there is enough water pressure.
Also, make sure that the ice bin is properly positioned so that it can catch the ice as it is produced. Finally, if all else fails, you may need to call a service technician to come and take a look at your ice maker.
How long does it take for KitchenAid ice maker to make ice?
Assuming that you have a properly functioning ice maker, it should only take a few minutes for your machine to produce its first batch of ice.
KitchenAid’s website recommends waiting 24 hours before using your ice maker for the first time, to allow the unit to cool down completely and reach its optimal operating temperature. After that, you can expect it to produce about 50 cubes of ice per day.
Of course, waiting for your ice maker to do its job can be frustrating, especially when you’re thirsty or in a hurry. If you need ice right away, there are a few ways to speed up the process.
First, make sure that your freezer is set to the coldest setting; this will help the ice maker work more efficiently. You can also try running the self-cleaning cycle, which will briefly raise the freezer’s temperature and help dislodge any frost or ice buildup that might be slowing down the machine.
Finally, if all else fails, you can always fill a plastic bag with ice cubes from your freezer and use that to make your drink.
How do I reset my KitchenAid refrigerator after changing the water filter?
If your KitchenAid refrigerator has a water filter indicator light, it will need to be reset after you change the water filter. To do this, simply press and hold the button for three seconds.
If your refrigerator does not have a water filter indicator light, there is no need to reset anything after changing the water filter.
Related:
- Whirlpool Refrigerator Ice Maker Not Working? {How To Fix}
- 10 Reasons Why Kenmore Refrigerator Ice Maker Not Working: How to Fix
- LG Refrigerator Ice Maker Not Working? Here’s the Fix!
- 5 Reasons for Samsung Refrigerator Ice Maker Not Working (How To Fix)
Conclusion
If your KitchenAid refrigerator’s ice maker is not working, don’t panic! There are a few simple things you can do to fix the problem.
Check the ice maker’s water supply line first to make sure it is not frozen. If it is, thaw it out and try again. If that doesn’t work, check the ice maker’s bail arm to see if it is stuck in the down position. If it is, simply lift it up and try again.
Lastly, if none of these solutions work, you may need to call a professional for help. But don’t worry, with a little troubleshooting, you should be able to get your ice maker working again in no time!
We hope this article was helpful in troubleshooting your KitchenAid refrigerator’s ice maker.