12 Reasons Why Amana Refrigerator Not Cooling – {How to Fix}

If your Amana refrigerator is not cooling, you are likely experiencing one of two problems: either the compressor is not running or the evaporator fan is not working.

In this blog post, we will discuss how to fix both of these common issues. Keep in mind that before you start troubleshooting your refrigerator, you should make sure that it is plugged in and that the breaker has not been turned off.

Related: 7 Refrigerator Brands To Avoid and 5 Most Reliable Brands

Reasons Why Amana Refrigerator Not Cooling and How to Fix

1. The fridge is not turned on.

Check the power cord to see if it’s plugged in. If it is, check the outlet to see if there’s power. If not, reset the circuit breaker or replace the fuse.

2. Condenser coils.

There are two sets of coils in your Amana refrigerator: the condenser coils and the evaporator coils.

The condenser coils are located on the back of the fridge, while the evaporator coils are located in the freezer. If either set of coils is dirty, it can cause your fridge to stop cooling properly.

Why does it fail?

Refrigerators rely on a refrigerant to cool the air inside. This refrigerant is circulated through the coils, where it absorbs heat from the air.

If the coils are dirty, the refrigerant can’t circulate properly and the fridge won’t be able to cool properly.

How do you fix it?

The best way to clean your coils is to use a coil cleaning brush. You can find these brushes at most hardware stores. Just make sure to unplug your fridge before you start cleaning. Once you’ve brushed the coils, wipe them down with a damp cloth to remove any debris.

If your coils are particularly dirty, you may need to use a commercial coil cleaning solution. Follow the instructions on the bottle carefully to avoid damaging your fridge.

Once you’ve cleaned the coils, keep them free of dust and debris by vacuuming around them every few months. This will help your fridge run more efficiently and prevent problems in the future.

How can I prevent it from happening again?

The best way to prevent dirty coils is to vacuum around them regularly. You should also dust any vents or openings on the back of your fridge to keep dirt and dust from getting inside. Finally, make sure you clean up spills promptly to prevent them from making the coils sticky and attracting more dirt.

Cleaning your coils regularly will help your Amana refrigerator run more efficiently and prevent cooling problems.

3. Condenser fan motor.

The condenser fan motor blows air across the condenser coils to cool them. If the condenser fan motor is defective, the fridge won’t be able to cool properly.

Why does it fail?

The condenser fan motor can fail due to a variety of reasons, such as age, lack of lubrication, or debris caught in the blades.

How to fix it:

To test whether your fridge’s condenser fan motor is working, first make sure that the fridge is plugged in and that the power switch is turned on. Then open the fridge and feel the coils on the back wall. If they’re not cold, then the condenser fan motor is likely defective.

You can clean the condenser coils and check for debris caught in the blades. If the problem persists, you may need to replace the condenser fan motor.

How can I prevent it from happening again?

You can help prevent the condenser fan motor from failing by regularly cleaning the coils and making sure there is no debris caught in the blades. You should also make sure that the fridge is properly plugged in and that the power switch is turned on.

4. Evaporator fan motor.

The evaporator fan motor pulls air through the evaporator coils and circulates it throughout the refrigerator. If the evaporator fan motor is not working, the refrigerator will not cool properly.

Why does it fail?

The evaporator fan motor can fail due to a number of reasons, such as age, wear and tear, or electrical issues.

To test this part:

First, make sure that there is power going to the evaporator fan motor. Next, check to see if the blades of the fan are free of debris.

If the blades are obstructed, remove the debris and test the fan again. Finally, check the evaporator coils to see if they are frozen. If they are, thaw them out and test the fan again.

How to fix it:

If the evaporator fan motor is not working, you will need to replace it. You can find replacement evaporator fan motors online or at your local appliance store. Be sure to follow the instructions carefully when replacing the evaporator fan motor.

How can I prevent it from happening again?

There is not much you can do to prevent the evaporator fan motor from failing, but you can keep the coils clean and free of debris. This will help to prolong the life of the evaporator fan motor. You should also have your refrigerator serviced regularly by a qualified technician.

5. Start relay.

The start relay is located on the back of the Amana refrigerator, near the compressor. It helps to supply power to the compressor. If the start relay is defective, the compressor won’t run.

Why does it fail?

The most common reason for the start relay to fail is because of a problem with the compressor.

If your Amana refrigerator is not cooling, one possible issue may be the start relay. The start relay is located on the back of the Amana refrigerator, near the compressor. It helps to supply power to the compressor. If the start relay is defective, the compressor won’t run.

How to fix it?

To test the start relay, first, unplug the refrigerator and then remove the cover of the start relay. There will be four wires connected to the start relay. Using a multimeter, test for continuity between the two outside terminals. There should be continuity. If there is no continuity, the start relay needs to be replaced.

Using a pair of pliers, remove the two wires from the defective start relay and then attach them to the new start relay. Replace the cover and plug in the refrigerator.

6. Temperature control thermostat.

It is usually located in the back of the fridge near the bottom. Once you have located it, you will need to turn it to the left until it clicks. This will reset the thermostat and your fridge should start cooling again. If it does not, you may need to replace the thermostat.

Why does it fail?

The most common reason for this issue is because the thermostat was accidentally turned off.

How can I prevent it from happening again?

To prevent this from happening again, you can either put a reminder on your fridge or keep the manual in a safe place so that you can reference it if needed.

7. Start capacitor.

The start capacitor is one of the main parts of the Amana refrigerator. If it is not working, the fridge will not be able to cool properly.

Why does it fail?

There are a few things that can cause the start capacitor to fail. The most common reason is age. Over time, the capacitors can break down and stop working properly. Another reason for failure is voltage. If the capacitor is not getting enough power, it will not be able to work properly.

What are the symptoms of a failing start capacitor?

The most common symptom of a failing start capacitor is the fridge not being able to cool properly. The fridge may also make a humming noise or have trouble starting up.

How to fix it?

If the start capacitor is failing, it will need to be replaced. This is a fairly simple repair that can be done by most people. However, if you are not comfortable doing the repair yourself, you can always call a professional.

How can I prevent it from happening again?

There are a few things you can do to prevent the start capacitor from failing. First, make sure that it is getting enough power. If the voltage is too low, it can cause the capacitor to fail.

Second, keep an eye on the age of the capacitor. Over time, they will break down and need to be replaced. Finally, make sure that the fridge is not overworking. If it is running too much, it can cause the capacitor to fail.

8. Thermistor.

If your Amana refrigerator is not cooling, one possible cause could be an issue with the thermistor. The thermistor is a sensor that monitors the temperature inside the fridge.

If it’s not working properly, it can cause the fridge to either not cool properly or to cycle on and off too frequently.

Why does it fail?

There are a few reasons why a thermistor might fail. One is simply age – over time, the sensor can become less accurate.

Another possibility is that the fridge has been bumped or jostled, which can cause the sensor to become dislodged from its position.

Finally, if there’s something blocking the sensor (like dust or dirt), that can also interfere with its ability to accurately monitor the temperature.

How do you fix it?

If your fridge’s thermistor is not working properly, you’ll need to replace it. This is a relatively simple repair that you can do yourself, but you will need to order a new sensor from Amana (or another appliance parts retailer).

Once you have the new sensor, simply remove the old one and install the new one in its place. Make sure that it’s properly positioned before putting everything back together.

How can I prevent it from happening again?

There are a few things you can do to help prevent your fridge’s thermistor from failing. First, keep the fridge clean and free of dust and dirt.

Second, be careful when moving or cleaning the fridge – avoid bumping or jostling it too much.

Finally, if you notice that the fridge isn’t cooling properly, have it checked out by a qualified technician as soon as possible. By catching problems early, you can often avoid more serious (and expensive) repairs down the road.

9. Temperature Control Board.

The Amana refrigerator’s temperature control board regulates the freezer and fresh food sections of the fridge. If it senses that the temperature in either section is too high, it will activate the cooling process to bring the temperature down.

However, if the temperature control board itself is not working properly, it can cause the fridge to stop cooling altogether.

Why does it fail?

There are a few reasons why the temperature control board might fail. One possibility is that it has become damaged due to a power surge or other electrical issue.

Another possibility is that it has simply worn out over time and needs to be replaced. Whatever the reason, if the temperature control board is not working properly, it will need to be replaced in order to get the fridge working again.

How do you fix it?

If the temperature control board is the problem, the only way to fix it is to replace it. This is a relatively simple repair that can be done by most people with basic handyman skills. However, if you are not comfortable making this repair yourself, you can always call a qualified repairperson to do it for you.

Replacing the temperature control board is usually a pretty straightforward repair. First, you will need to locate the old board and remove it from the fridge. Then, simply install the new board in its place and reconnect any wires that may have come loose. Once everything is reconnected, you should be good to go!

How can I prevent it from happening again?

There is not really anything you can do to prevent the temperature control board from going bad. However, you can help prolong its life by making sure that your fridge is not exposed to drastic temperature changes and by regularly cleaning the coils and other parts of the fridge.

10. Compressor.

The compressor is one of the most important parts of your Amana refrigerator, and it is responsible for cooling the air inside the fridge. If your compressor is not working properly, it can cause the fridge to stop cooling properly.

Why does it fail?

There are a few reasons why your Amana refrigerator compressor might fail. One possibility is that the compressor is overloaded. This can happen if there is too much food in the fridge, or if the fridge is not properly ventilated. Another possibility is that the compressor itself is faulty.

How to fix it?

There are a few things that you can do to troubleshoot this problem.

First, check to see if the compressor is getting power. If it is not, make sure that the power cord is plugged in and that the outlet is working.

Next, check to see if the compressor is running. If it is not, you may need to replace the start capacitor.

If the compressor is running but the fridge is still not cooling properly, you may need to replace the compressor.

How can I prevent it from happening again?

There are a few things that you can do to prevent this problem from happening again. First, make sure that your fridge is properly ventilated. Second, do not overload the fridge with too much food. Third, keep an eye on the compressor and make sure that it is not overworked.

11. Main control board.

The main control board is the “brain” of the refrigerator, and it controls all the major functions of the fridge. If this part is defective, it can cause a variety of problems, including the fridge not cooling properly.

Why does it fail?

There are a few reasons why the main control board might fail. The most common reason is a power surge that can damage the electronic components on the board. Another possibility is that a component on the board has failed and needs to be replaced.

What are the symptoms?

If the main control board is failing, you may notice that the fridge is not cooling properly. The fridge may also run for longer than usual or make strange noises.

How to fix it:

If the main control board is defective, you will need to replace it. This is a fairly difficult repair and should be done by a qualified technician.

How can I prevent it from happening again?

There are a few things you can do to help prevent the main control board from failing. First, be sure to protect your fridge from power surges by using a surge protector. Second, if you notice any strange noises or behavior from your fridge, have it checked out by a qualified technician as soon as possible.

12. In demo or showroom mode.

If your Amana refrigerator is in demo mode, the display will read “DEMO” and the interior lights will be turned off. The refrigerator will not cool to proper temperatures in this mode. To deactivate demo mode, press and hold the “Lock” and “Light” buttons on the control panel for three seconds. The display should now read “OFF.”

If your Amana refrigerator is in showroom mode, the display will read “SHOW” and the interior lights will be turned off. The refrigerator will not cool to proper temperatures in this mode. To deactivate showroom mode, press and hold the “Lock” and “Light” buttons on the control panel for three seconds. The display should now read “OFF.”

Related:

Amana Refrigerator Not Cooling but Freezer Working?

A refrigerator not cooling but freezer working can be a very frustrating situation. You depend on your fridge to keep your food fresh and your drinks cold. When the fridge is not working, it can cause a lot of inconvenience. If you are experiencing this problem, there are a few things that you can do to try and fix it.

First, check to see if the fridge is set to the correct temperature. If it is not, adjust it to the proper setting and wait a few hours to see if that fixes the problem. If the fridge is still not cooling, check to see if there are any items blocking the vents. Sometimes things can get placed in front of the vents and cause airflow problems.

If you have checked the temperature and the vents and the fridge is still not cooling, it is time to call a repairman. Amana refrigerators are very reliable but they can still break down from time to time. A qualified repairman will be able to diagnose the problem and get your fridge back up and running in no time.

Amana Refrigerator Not Cooling Enough?

First, check to ensure that your Amana refrigerator is properly plugged in. Next, check to see if the fridge is set to the correct temperature. If both of these things are fine, then there could be an issue with the condenser coils.

These coils help to cool down the fridge and if they are dirty, it can cause the fridge to not cool properly. To clean the coils, simply unplug the fridge and vacuum them with a brush attachment.

You should also check to see if there is adequate airflow around the fridge. If not, then you may need to move it to a different location. Finally, if none of these things work, then you may need to call a repairman.

Brand new Amana refrigerator not cooling?

If your brand new Amana refrigerator is not cooling, there are a few things you can try to get it working again. First, check to make sure that the power cord is plugged into an outlet and that the fridge is turned on.

Next, check the temperature settings to make sure they are set to the correct levels. Finally, if all else fails, you can contact a professional for help.

Amana refrigerator bottom freezer top not cooling?

This may be a problem with the evaporator fan. The evaporator fan is responsible for circulating air throughout the fridge and freezer compartments. If the evaporator fan is not working properly, it could cause the top of the fridge to not cool properly.

If you think that your Amana refrigerator’s evaporator fan may be to blame for the top not cooling properly, you can try troubleshooting the problem yourself. First, make sure that the evaporator fan is getting power.

Next, check to see if the blades of the fan are free from obstruction. If the blades are obstructed, they will need to be cleaned in order to work properly. Finally, make sure that the evaporator fan motor is not damaged.

How do I reset the compressor on my Amana refrigerator?

There are a few reasons why your Amana refrigerator’s compressor might need to be reset. One reason could be that the power to the fridge was interrupted for a prolonged period of time and the compressor needs to be restarted. Another reason could be that the fridge has been turned off for a long period of time and the compressor needs to be restarted.

If you need to reset your Amana refrigerator’s compressor, follow these steps:

First, locate the circuit breaker that supplies power to the fridge. If the power was interrupted, this breaker will have been tripped. Reset the breaker and wait a few minutes for the power to come back on.

Next, locate the fridge’s thermostat and turn it to the “Off” position. Wait a few minutes and then turn the thermostat back to the “On” position.

Finally, press and hold the refrigerator’s reset button for three seconds. This will restart the compressor. Once the compressor is running, you can adjust the thermostat to your desired setting.

How do I clean the condenser coils on my Amana refrigerator?

To clean your Amana refrigerator’s condenser coils, first unplug the fridge and move it away from the wall. Next, locate the coils on the back of the fridge and vacuum them with a soft-bristled attachment. Finally, wipe down the coils with a damp cloth to remove any dust or debris.

How do I clean my Amana evaporator coil?

There are a few things you’ll need in order to clean your Amana evaporator coil: a screwdriver, a vacuum cleaner with an attachment hose, and some ammonia-free cleaning solution.

The first thing you’ll want to do is locate the evaporator coil – it’s usually located behind the refrigerator. Once you’ve found it, use the screwdriver to remove the access panel.

Next, use the vacuum cleaner to remove any dirt or dust that’s accumulated on the coil. Be sure to work slowly and carefully so you don’t damage the coil. Once you’ve finished vacuuming, apply the cleaning solution to a clean cloth and wipe down the coil.

Conclusion

If your Amana refrigerator is still not cooling after following the troubleshooting tips above, it may be time to call a professional. A qualified technician will be able to diagnose and fix the problem quickly and efficiently.

We hope this guide has been helpful in solving your Amana refrigerator cooling problems.