Last Updated on August 15, 2022 by Kimberly Crawford
If your GE refrigerator water dispenser is not working, you’re not alone. This is a common problem that many people experience with their GE refrigerators.
In this blog post, we will discuss some of the most common causes of this issue and how to fix them. We will also provide some helpful tips on how to prevent this problem from occurring in the future.
Reasons Why GE Refrigerator Water Dispenser Not Working?
1. Dispenser Control Board.
If your GE refrigerator water dispenser is not working, the first thing to check is the dispenser control board. This board controls all of the functions of the dispenser, including the water and ice functions.
Why does it fail?
There are many reasons why a Dispenser Control Board may fail. The most common reason is due to a power surge or voltage spike.
This can damage the electronic components on the board. Other reasons include physical damage, such as from a dropped refrigerator, or from water exposure.
How do you fix it?
If your Dispenser Control Board has failed, you will need to replace it. You can do this yourself if you are handy with tools and electronics. Otherwise, you will need to call a qualified technician. Be sure to unplug your refrigerator before attempting any repairs.
How much does it cost?
A new Dispenser Control Board will cost you around $100. If you hire a technician to do the work, it will likely cost you between $200 and $300.
What are the symptoms?
The most common symptom of a failed Dispenser Control Board is that the water dispenser and/or ice maker will not work. You may also see error codes or blinking lights on the control panel.
2. Frozen Water Tube.
The water tube that supplies water to the dispenser can freeze. This is usually caused by low temperatures in the refrigerator, but can also be caused by a blockage in the tube.
How do I fix it?
To thaw a frozen water tube, unplug the refrigerator and turn off the water supply to it. Next, use a hair dryer to thaw the ice around the water valve.
Once the ice is melted, turn on the water supply and plug the refrigerator back in. Test the water dispenser to see if it is working properly. If not, you may need to replace the water valve.
3. Low Water Pressure.
If your home has low water pressure, it could be the reason your GE refrigerator’s water dispenser isn’t working. Check your home’s water pressure and, if necessary, have a plumber come out to take a look.
Why does it fail?
One possible reason for low water pressure from the house supply is that the water shut off valve to the refrigerator is not fully open.
If the shut off valve is only partially open, it will restrict the flow of water to the dispenser. Another possibility is that there is a blockage in the water line leading to the refrigerator.
This can be caused by sediment build-up or a kink in the line. If there is a blockage, it will need to be removed in order to restore water flow.
If you have checked the shut off valve and water line and neither of those are the problem, then the issue may be with the water pressure regulator on the refrigerator itself.
This is a valve that controls the amount of water flowing into the refrigerator and can become clogged over time. Cleaning or replacing the water pressure regulator may resolve the issue.
4. Door Switch.
If the door switch is defective, the dispenser will not work. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
Why does it fail?
The most common reason for the door switch to fail is because it is worn out. Over time, the switch will become less responsive, and eventually it will stop working altogether.
The other reasons for the door switch to fail are much less common, but they include a faulty solenoid or a broken wire. If you suspect that your door switch is the problem, you can test it with a multimeter.
If the door switch is the problem, there are a few things you can do to fix it. The first is to try cleaning the contacts with a cotton swab dipped in vinegar.
If that doesn’t work, you can try replacing the switch. This is a relatively easy repair that you can do yourself, but if you’re not comfortable doing it, you can always call a refrigerator repair service.
5. Dispenser Switch.
If your GE refrigerator water dispenser is not working, there are a few things you can check to see if it’s the switch. The first thing to do is make sure that the power is turned on to the fridge.
If it is, then check to see if the switch itself is turned on. Sometimes the switch can become accidentally turned off, so make sure that it’s in the “on” position. If the switch is on and the water dispenser still isn’t working, then it’s likely that there is an issue with the water line itself.
Make sure that there is no blockage in the water line and that it’s properly connected to the fridge. If everything looks good with the water line, then it’s possible that there is an issue with the dispenser itself. If this is the case, you’ll need to call a repairman to come and take a look at it.
6. Water Filter.
Check the water filter to see if it needs to be replaced. If the water filter is old, it may be clogged and not allowing water to flow through.
Why does it fail?
There are many reasons why water filters fail. The most common reason is that the filter has reached its maximum capacity and needs to be replaced.
Other reasons include a clogged or dirty filter, incorrect installation, or a faulty water line.
How to fix it?
If your water filter fails, the first thing you should do is check the manufacturer’s instructions to see if it needs to be replaced. If so, follow the instructions on how to replace it.
If your water filter is clogged or dirty, you can try cleaning it with a brush or by running water through it. If this doesn’t work, you may need to replace it.
If your water filter is installed incorrectly, you will need to remove it and reinstall it following the manufacturer’s instructions.
7. Water Inlet Valve.
This valve supplies water to the ice maker and water dispenser, and if it’s defective, neither of these components will function properly.
Why does it fail?
There are a few reasons why your water inlet valve may have failed. The most common reason is that the solenoid on the water inlet valve has gone bad.
The solenoid is what controls the flow of water into the fridge, and if it goes bad, then the water will not be able to flow properly.
Another possibility is that the water inlet valve itself is clogged. If this is the case, then you will need to clean it out with a vinegar solution.
If your water inlet valve has failed, then you will need to replace it. You can find replacement valves at most hardware stores or online.
Be sure to get one that fits your model of refrigerator. Once you have the new valve, simply follow the instructions that come with it to install it.
8. Wire harness.
Check to see if the wire harness is plugged in. If it is not plugged in, plug it in and check to see if the water dispenser is working. If the water dispenser is still not working, call a technician.
9. Water line.
If there’s no water coming into the fridge, the dispenser won’t work. Make sure the water valve behind your fridge is turned on all the way. You may also need to replace the filter if it’s clogged.
If your fridge is connected to a water line and you’re still not getting any water, there may be an issue with the shut-off valve. Check to see if the valve is open all the way. If it’s not, turn it until it is.
Once you’ve checked the water line and shut-off valve, if the water dispenser still isn’t working, you may need to call a professional for help.
Related:
- 8 Reasons for GE Refrigerator Leaking Water on Floor: What to Do
- 6 Reasons Why GE Refrigerator Making Noises: What to Do
GE refrigerator water dispenser not working but ice maker is?
There are a few things that could be causing your GE refrigerator’s water dispenser to not work, but the ice maker is. First, check to see if the water line is frozen. If it is, thaw it out and see if that solves the problem.
If the water line isn’t frozen, then there might be a problem with the water valve. Check to see if the valve is open all the way. If it isn’t, turn it on and see if that solves the problem. If neither of these solutions work, then you might need to call a repairman.
GE refrigerator water dispenser not working after replacing filter?
If your GE refrigerator’s water dispenser isn’t working after you’ve replaced the filter, there are a few things you can try.
First, make sure that the new filter is properly installed. If it isn’t, then that could be why the water dispenser isn’t working.
Another thing to check is the water line. If there is a blockage in the water line, then that could also be why the water dispenser isn’t working.
GE refrigerator water dispenser starts then stops
There are a few reasons why your GE refrigerator’s water dispenser may start and stop suddenly. The most common reason is that the water line is frozen. If the water line is frozen, you’ll need to thaw it out before the dispenser will work properly again.
Another possibility is that the filter needs to be replaced. A clogged or dirty filter can cause the water dispenser to stop working.
Finally, the water pressure may be too low. If the water pressure is too low, you’ll need to increase it before the dispenser will work properly again.
How to fix it?
If the water line is frozen, thaw it out with a hair dryer or by running hot water through the line. If the filter needs to be replaced, follow the instructions in your owner’s manual.
If the water pressure is too low, you’ll need to contact your local water company to have them increase the pressure. Once they’ve increased the pressure, your water dispenser should start working properly again.
Why GE Refrigerator Water Dispenser Won’t Stop?
If your GE refrigerator’s water dispenser is constantly running or won’t stop, there are a few possible causes.
The most common reason is that the dispenser float is stuck in the “on” position. This can happen if the float gets debris caught under it, preventing it from moving back to the “off” position.
Other possible causes include a clogged water filter, a faulty water valve, or a problem with the control board. If your GE refrigerator’s water dispenser is constantly running or won’t stop, check the float first. If that doesn’t solve the problem, then you’ll need to troubleshoot further to identify the root cause.
How to fix it?
If the problem is with the float, then you’ll need to clean it and make sure there’s nothing blocking it from moving freely. If the water filter is clogged, replace it with a new one.
If the water valve is faulty, you’ll need to replace it. And if the control board is malfunctioning, you’ll need to replace it or have it repaired.
Why GE cafe refrigerator water dispenser not working?
There are a few reasons why your GE cafe refrigerator water dispenser may not be working. First, check to make sure that the water line is connected to the back of the fridge and that there is no kink in the line.
If the water line is kinked, it will need to be replaced. Next, check to see if the water filter needs to be replaced. The water filter should be replaced every six months. Finally, make sure that the water valve is turned on all the way. If it is not, turn it on and try again.
Why GE french door refrigerator water dispenser not working?
There are a few reasons why your GE french door refrigerator water dispenser may not be working.
First, check to make sure that the water line is properly connected to the back of the fridge. If it is, then the next step is to check for a clog in the line.
To do this, disconnect the water line from the fridge and blow into it. If you don’t feel any air coming through, then there is likely a clog somewhere in the line.
If blowing into the line doesn’t clear the clog, then you’ll need to use a plunger to try and dislodge it.
Put the plunger over the end of the water line and push and pull it up and down. If this doesn’t work, then you may need to call a plumber to come and take a look at the line.
GE profile refrigerator water dispenser not working?
Here are some common causes and solutions.
One possible reason why your GE profile refrigerator water dispenser is not working could be because the water line is frozen. If this is the case, you’ll need to thaw out the line before water can flow through again.
Another possibility is that there isn’t enough power going to the dispenser. Check to make sure that the dispenser is plugged in securely and that the circuit breaker hasn’t tripped.
If neither of those solutions solve the problem, then it’s likely that there is an issue with the water valve. This is a more serious problem and will require you to call a technician for assistance. In the meantime, you can try using the water dispenser on your GE profile refrigerator’s ice maker.
GE bottom freezer refrigerator water dispenser not working?
Don’t worry, you’re not alone. In fact, this is a very common problem. Fortunately, it is usually an easy fix.
There are a few things that could be causing your water dispenser to not work. The most likely culprit is a clogged filter. If your filter is clogged, it will need to be replaced.
Another possibility is that the water line is frozen. This is most likely to happen if you have your refrigerator set to a very cold temperature. If the water line is frozen, you will need to thaw it out before the dispenser will work again.
GE Eterna refrigerator water dispenser not working?
Check out these quick fixes.
If your GE Eterna refrigerator water dispenser is not working, there are a few things you can check to try and fix the problem. First, make sure that the water line is turned on and that there is water in the reservoir.
Next, check to see if the dispenser switch is turned on. If it is, turn it off and then back on again. Finally, if none of these solutions work, you may need to call a professional for help.
GE Monogram built-in refrigerator water dispenser not working?
Check out these five easy tips to get your water dispenser working like new again.
If your GE Monogram built-in refrigerator water dispenser is not working, don’t despair. There are a few easy things you can do to get it working like new again.
First, check to make sure that the water line is properly connected to the water dispenser. If it is not, then you will need to reconnect it.
Next, check the water filter. If the water filter is dirty, then it will need to be replaced.
Third, check the ice maker. If the ice maker is not working properly, then it will need to be repaired or replaced.
Fourth, check the water pressure. If the water pressure is too low, then you will need to increase it.
Finally, if all of these things fail, then you may need to call a professional to repair or replace your GE Monogram built-in refrigerator water dispenser.
GE Refrigerator Water Dispenser Not Cold?
If your GE refrigerator water dispenser is not cold, there are a few things you can do to troubleshoot the issue.
First, check to make sure that the water reservoir is full and that the ice maker is turned on. If both of these things are fine, then it’s likely an issue with the water line.
Try flushing the water line with hot water to see if that clears the problem. If not, then you may need to call a professional to take a look at your refrigerator.
GE refrigerator water dispenser dripping?
Here’s what you can do to fix it.
If your GE refrigerator water dispenser is dripping, there are a few things you can do to fix it. First, check the water filter and replace it if necessary.
Next, clean the drip tray and make sure it is properly positioned under the dispenser. Finally, adjust the water pressure if necessary. With a little troubleshooting, you should be able to fix the problem and stop the dripping.
How to turn water dispenser on a GE refrigerator.
There are a few things you need to do in order to properly turn on your GE refrigerator’s water dispenser. First, locate the water line that runs to your fridge.
Next, find the shut-off valve for this line and make sure it is turned to the “on” position. Finally, press the button or lever on your fridge that turns on the water dispenser. If everything is working properly, water should begin to flow from the dispenser.
How do you reset a GE refrigerator water dispenser?
If your GE refrigerator water dispenser is not working properly, you may need to reset it. To do this, simply follow these steps:
First, unplug the refrigerator from the power outlet.
Next, locate the water filter housing and remove the filter.
Then, flush the water line by running some water through the dispenser for about a minute.
Finally, replace the water filter and plug the refrigerator back in to the power outlet.
Conclusion
If your GE refrigerator water dispenser is not working, there are a few things you can check. First, make sure that the water line is connected to the fridge and that the valve is turned on. Next, check the filter and replace it if necessary. Finally, if none of these solutions work, you may need to call a technician.
We hope this article was helpful in troubleshooting your GE refrigerator water dispenser. For more appliance repair tips, be sure to check out our blog.