Last Updated on August 14, 2022 by Kimberly Crawford
If you have a GE refrigerator, then you know that it requires a water filter. The bad news is that the filters need to be changed on a regular basis in order to keep your refrigerator running properly. The good news is that changing the filter is an easy process, and we will show you how to do it in 11 easy steps!
Types of water filters in GE refrigerator.
There are several types of water filters that can be used in GE refrigerators.
1. AFPWF water filter.
This water filter is located in the back, right top of your refrigerator. It is recommended to be replaced every six months or 200 gallons.
To replace this filter, first you will need to locate it. The AFPWF water filter is located in the back, right top of your refrigerator. To remove it, simply twist it to the left and pull it out.
To install the new filter, twist it to the right until it is snug and cannot be twisted anymore. Be sure to flush the water system for five minutes before use.
2. MWF water filter.
This is the most common type of GE refrigerator water filter. It is a white, cylindrical filter that fits into a round, silver canister. The MWF filter has a lifespan of six months and should be replaced every six months.
3. GSWF water filter.
This filter is designed to remove impurities from your water, like chlorine and sediment. It’s an affordable option that can be found at most major retailers, and it’s easy to install.
To replace the GSWF filter, first locate the filter housing in your refrigerator. The housing is usually located in the upper-right corner of the fridge, behind a panel.
Once you’ve found the housing, twist the old filter counterclockwise to remove it. Then, insert the new filter into the housing and twist it clockwise until it’s tight. Finally, flush out the filter by running water through it for several minutes.
If you have a GE refrigerator with a built-in water dispenser, you’ll need to replace the GSWF filter every six months to ensure that your water tastes great and is free of impurities.
Fortunately, replacement filters are easy to find and relatively affordable. So be sure to keep your GSWF filter fresh, and your water will taste great for years to come.
4. MSWF water filter.
The MSWF is a General Electric refrigerator water filter that fits select GE and Hotpoint side-by-side refrigerators. This particular type of filter removes contaminants such as cysts, lead, mercury, and some pesticides and pharmaceuticals.
The MSWF has a white outer casing with a blue cap and can be found in the back upper-right corner of your refrigerator. Depending on your model, you may need to twist or push the filter to release it from the housing.
To replace the MSWF filter, first locate it in the back upper-right corner of your refrigerator. If you see a small handle, pull on it to release the filter from the housing.
If there is no handle, you may need to twist the filter to release it. Once the filter is released, discard it and insert the new one. Make sure the new filter is firmly in place before returning the housing back to its original position.
It’s important to replace your MSWF water filter every six months or when the “change filter” light on your refrigerator turns on, whichever comes first. A clogged or dirty filter can reduce water flow and affect the quality of your water.
5. XWFE water filter.
XWFE is the most common type of filter. It is made of carbon block that removes contaminants from water.
To replace the XWFE filter, open the filter compartment door and unscrew the old filter.
Insert the new filter into the compartment and screw it in clockwise until it is tight.
Close the door and run water through the dispenser for five minutes to prime the filter.
6. RPWFE water filter.
The RPWFE is one type that is known for its long lasting life and ability to remove impurities from your water. This filter can last up to six months and removes ninety-nine percent of lead, chlorine, and other contaminants.
It’s important to change your refrigerator water filter every six months or when the “change filter” light comes on, whichever comes first. A clogged or dirty filter can restrict water flow and cause your fridge to work harder than it needs to – using more energy and costing you money.
To replace the RPWFE filter:
-Push on the release button located above the filter.
-Pull out the old filter.
-Insert the new filter, making sure it’s properly seated.
-Release the button and enjoy clean, filtered water!
Related: How to Change a Water Filter in a Whirlpool French Door Refrigerator
How to Change Your GE Refrigerator Water Filter in 11 Easy Steps
Before we get started, there are a few things you need to know.
First, you need to find out what type of filter your GE refrigerator uses. There are two types of filters: inline and cartridge. Inline filters are located outside of the refrigerator, while cartridge filters are located inside the refrigerator.
Second, you need to know where your filter is located. The location of the filter will depend on the model of your refrigerator.
Third, you need to know when to change your filter. GE recommends that you change your refrigerator water filter every six months or when the “change” light comes on, whichever comes first.
Now that you know what you need, let’s get started!
The first step is to locate your filter. As we mentioned before, the location of the filter will depend on the model of your refrigerator. If you have an inline filter, it will be located either in the back of the refrigerator or under the sink. If you have a cartridge filter, it will be located inside the refrigerator.
Once you have located the filter, the next step is to turn off the water supply to your refrigerator. This is usually done by turning off the valve that is located behind the refrigerator.
The third step is to remove the old filter. To do this, you will need to unscrew the housing that holds the filter in place. Once the housing is removed, you can simply pull out the old filter.
The fourth step is to install the new filter. To do this, you will need to insert the new filter into the housing and screw it in place. Make sure that you screw it in tightly so that there are no leaks.
The fifth step is to turn on the water supply to your refrigerator. To do this, you will need to turn on the valve that is located behind the refrigerator.
The sixth step is to flush the new filter. To do this, you will need to run water through the filter for about five minutes. This will help remove any air that is in the filter.
The seventh step is to reset the filter indicator light. To do this, you will need to press and hold the “filter” button on your refrigerator for three seconds.
The eighth step is to replace any water that was lost during the filter change. To do this, you will need to fill up a pitcher with water and pour it into the water dispenser on your refrigerator.
The ninth step is to put any food that was in the refrigerator back into the fridge.
And finally, the tenth step is to enjoy your clean and fresh-tasting water!
Related:
- 8 Reasons for GE Refrigerator Leaking Water on Floor: What to Do
- 6 Reasons Why GE Refrigerator Making Noises: What to Do
- 8 Reasons for GE Refrigerator Not Cooling and {How To Fix}
Where is the water filter on GE refrigerator located?
The water filter is located in the back, right hand side of the refrigerator. If you have a GE refrigerator, it is important to know where the water filter is located so that you can change it regularly and keep your refrigerator running smoothly.
How to change water filter on GE Bottom Freezer Refrigerator?
It’s easy to change the water filter on your GE Bottom Freezer Refrigerator. Here are the steps:
First, locate the filter cover inside your refrigerator. The cover is usually located in the upper right-hand corner of the unit.
Next, remove the old filter by turning it counterclockwise. Be sure to dispose of the old filter properly.
Now, insert the new filter into the housing and turn it clockwise until it is tight.
Finally, replace the cover and close the door.
Do I have to turn off water to change GE fridge filter?
No, you don’t have to turn off the water to change your GE fridge filter. However, it’s a good idea to shut off the ice maker and water dispenser before you change the filter.
This will help prevent any water from leaking out while you’re changing the filter. Once you’ve changed the filter, you can turn the ice maker and water dispenser back on.
What happens if you don’t replace water filter in refrigerator?
You may not notice any difference in your water quality at first, but over time, the filter will become clogged with sediment and other contaminants. This can cause your water to taste bad or even make you sick.
Additionally, your refrigerator will have to work harder to pump water through the clogged filter, which can lead to increased energy costs and shortened appliance life. For these reasons, it’s important to replace your water filter regularly. Depending on your model, you may need to do this every six months or so. Check your owner’s manual for specific instructions.
How much water should I run through a new refrigerator filter?
You should run about two gallons of water through your new refrigerator filter to clear out any impurities and ensure that the water tastes great. Be sure to discard the first few batches of water that come out of the filter, as they may contain some sediment.
After you’ve run a couple of gallons of water through the filter, you can be confident that your water will be delicious and refreshing.
Is it really necessary to change your refrigerator water filter every 6 months?
The answer may surprise you.
According to the manufacturer’s recommendation, yes, you should change your refrigerator water filter every six months. However, there are a few exceptions to this rule.
If you have hard water, for example, you may need to change your filter more frequently. Hard water can clog up your filter and reduce its efficacy.
If you live in an area with high levels of chlorine in the water supply, you may also need to change your filter more frequently. Chlorine can also reduce the efficacy of your refrigerator water filter.
How long do GE water filters last?
This is a question that we often get asked, and it really depends on a few factors. The first factor is the type of water filter you have. GE offers both replacement filters and reverse osmosis (RO) systems. Replacement filters typically last around six months, while RO systems can last up to two years.
The second factor is the water quality in your area. If you have hard water, for example, your filters may not last as long because they will need to be replaced more often.
The third factor is how much water you use. If you have a family of four and everyone takes showers every day, your filters will need to be replaced more often than if you live alone and only use the water for drinking and cooking.
How long does it take to make ice after changing water filter?
It really depends on how fast your freezer is. Mine takes about two hours to make a full tray of ice cubes. But if you have a faster freezer, it could take less time. Check the manufacturer’s instructions for your specific model.
In general, it’s best to wait 24 hours after changing your water filter before using the ice maker. This gives the filter time to remove any impurities from the water and ensures that your ice will be clean and clear.
How do I reset my ice maker after changing the water filter?
If you have a refrigerator with an ice maker, you’ll need to reset it after changing the water filter. Here’s how to do it:
First, locate the ice maker’s reset button. It may be located behind the kickplate at the bottom of the fridge, or in the upper right-hand corner of the fridge interior.
Press and hold the reset button for about 15 seconds. Then release it and wait a few minutes for the ice maker to start working again.
If your fridge doesn’t have a reset button, you’ll need to unplug it from the power outlet for about 30 seconds, then plug it back in. Again, wait a few minutes for the ice maker to start working.
If you’re still having trouble, consult your refrigerator’s owner’s manual for more troubleshooting tips. With a little patience, you should be able to get your ice maker up and running again in no time!
How do you know when to change GE refrigerator water filter?
The answer is simple. There is a light on the fridge that will tell you.
If the light is red, it means that the filter needs to be changed. If it is green, then the filter does not need to be changed. It is recommended that you change the filter every six months or so to keep your water tasting fresh.
How do you change the filter on a GE side-by-side refrigerator?
To change the filter on a GE side-by-side refrigerator, you will need to locate the filter housing. The filter housing is typically located in the upper right-hand corner of the refrigerator. Once you have located the filter housing, you will need to remove the old filter and insert the new filter.
Make sure that you follow the manufacturer’s instructions when changing the filter. After you have changed the filter, you will need to reset thefilter indicator light. The filter indicator light is usually located on the control panel of the refrigerator.
Why won’t my GE fridge dispense water after replacing filter?
There are a few reasons why your fridge might not be dispensing water after you’ve replaced the filter. First, make sure that the new filter is properly installed according to the manufacturer’s instructions.
Next, check to see if the water line is kinked or frozen. If neither of these are the issue, then it’s possible that the water inlet valve is defective and will need to be replaced.
If you’ve checked all of these things and your fridge still won’t dispense water, then it’s time to call a qualified repair technician.
Conclusion
Overall, changing your GE refrigerator water filter is a pretty simple process. Just make sure to follow the directions in your owner’s manual and take your time – and you should have no problem at all.
