Last Updated on September 22, 2022 by Jason Nguyen
If your Hotpoint dishwasher is not draining, you are likely experiencing a common issue that can be fixed without calling a technician. In this blog post, we will walk you through the steps to take to try and fix the problem yourself. We will also provide some tips on how to prevent this from happening in the future.
Related: 9 Dishwasher Brands To Avoid and 3 Most Reliable Brands
My Hotpoint Dishwasher is Not Draining: What Should I Do?
1. Drain Impeller
The drain impeller is a small, plastic piece that helps to move water out of the dishwasher. It is located near the bottom of the dishwasher, under the spray arm.
If your dishwasher is not draining properly, it is possible that the drain impeller is broken or missing.
To check if this is the problem:
-Remove the dishwasher from power by unplugging it or flipping the circuit breaker.
-Carefully remove the spray arm and look for the drain impeller. It is a small, plastic piece with fins that looks like a propeller.
-If you cannot find the impeller, it may be broken and lodged in the drain hose. To check this, disconnect the dishwasher from power and remove the drain hose from the dishwasher. Look for the impeller in the hose.
If you find that the impeller is broken or missing, it will need to be replaced. You can purchase a replacement impeller at most hardware stores or online. Be sure to get the correct impeller for your model of dishwasher.
Once you have the replacement impeller, follow these steps to install it:
-Turn off the power to the dishwasher at the breaker box.
-Remove the spray arm and set it aside.
-Locate the drain impeller. It is a small, plastic piece with fins that looks like a propeller.
-Remove the old impeller and insert the new one. Make sure it is securely in place.
-Replace the spray arm and turn on the power to the dishwasher at the breaker box.
-Run a test cycle to make sure that the dishwasher is draining properly.
2. Drain Pump
The drain pump on your Hotpoint dishwasher forces water through the hose and into the sink. If your dishwasher is not draining, the first thing you should check is whether the drain pump is working.
Why does it fail?
The most common reason for the drain pump to fail is because it becomes clogged with food or other debris. If your dishwasher is not draining properly, you should first check the drain pump to see if it needs to be cleaned.
To test whether the drain pump is working, remove the hose from the back of the dishwasher and place it in a bucket. Turn on the dishwasher and check whether water is being pumped into the bucket.
How do I fix it?
If the drain pump on your Hotpoint dishwasher is not working, you can try cleaning it yourself. First, unplug the dishwasher from the power outlet. Then, remove the drain pump by unscrewing it from the bottom of the dishwasher.
Clean any debris from the pump and replace it. If you cannot clean the pump yourself, you will need to replace it.
3. Drain Solenoid Kit
If your dishwasher isn’t draining properly, the drain solenoid could be the culprit. The drain solenoid is a small valve that opens and closes to allow water to enter or exit the dishwasher. If the solenoid is faulty, it can cause the dishwasher to not drain properly.
To replace the drain solenoid, you will need a Phillips screwdriver and a pair of pliers. First, locate the drain solenoid on the back of the dishwasher. There are two screws holding it in place. Remove these screws with the Phillips screwdriver. Then, use the pliers to remove the wire from the solenoid.
Next, take the new drain solenoid and insert it into the dishwasher. Make sure that the O-ring is in place. Then, screw in the two screws to hold it in place. Finally, reattach the wire to the solenoid and turn on the dishwasher. The dishwasher should now be draining properly.
4. Drain Valve
The drain valve is located at the bottom of the dishwasher and is responsible for draining water from the tub. If the drain valve is defective, the dishwasher will not be able to drain properly.
To check if the drain valve is defective, first make sure that there is no debris blocking it. If there is debris blocking the valve, remove it and see if the dishwasher is able to drain properly.
5. Pump and Motor Assembly
The pump and motor assembly is located under the dishwasher. To access it, you will need to remove the dishwasher from its installation location. Dishwashers can be heavy, so be sure to have someone help you with this.
Once the dishwasher is removed, locate the pump and motor assembly. It will be a large black object with a white center. There will be two hoses connected to it, one on the top and one on the bottom.
The top hose is the discharge hose and the bottom hose is the intake hose. The discharge hose will be connected to a drain pipe and the intake hose will be connected to the water supply.
To remove the pump and motor assembly, first disconnect both hoses. Then, remove the two bolts that hold it in place. Be careful when removing the assembly, as it is heavy and can be difficult to handle.
Once the pump and motor assembly is removed, you will need to replace it with a new one. Be sure to connect both hoses before bolting the assembly back in place. Then, reinstall the dishwasher and turn on the water supply. Test the dishwasher to be sure it is draining properly.
6. Garbage Disposer
If your dishwasher is not draining, it may be due to your garbage disposer. If you have a garbage disposer, make sure that it is not jammed or clogged.
You can check this by turning on the disposer and seeing if it makes a grinding noise. If it does, then you will need to unjam or unclog it.
7. Check Ball
The check ball is located in the dishwasher’s pump. Its purpose is to prevent water from flowing back into the dishwasher. If the check ball is dirty or damaged, it can prevent the dishwasher from draining properly.
To clean the check ball:
-Remove the kickplate of your dishwasher (this is usually located at the bottom of the dishwasher).
-Locate the check ball. It will be either white or clear, and about the size of a small marble.
-Use a toothpick or other sharp object to clean any debris from the check ball.
-Replace the kickplate and run a test cycle to see if the dishwasher is draining properly.
8. Check Valve
The check valve prevents water from flowing back into the dishwasher. If the check valve is defective, water can leak into the dishwasher. To replace the check valve, first shut off the water to the dishwasher.
Then disconnect the hose from the inlet valve and remove the screws that hold the check valve in place. Install a new check valve and reconnect the hose. Turn on the water and test the dishwasher to see if it is draining properly.
9. Drain Hose
The drain hose is the long, flexible pipe that runs from the dishwasher to the sink or disposal. It carries water and debris away from the washer.
If your Hotpoint dishwasher isn’t draining properly, there are a few things you can check before calling a technician. First, make sure that the drain hose is not kinked or clogged.
A kinked hose can prevent water from flowing out of the dishwasher, while a clogged hose can cause the water to back up into the washer.
How to check?
First, disconnect the dishwasher from the power source. Then, remove the drain hose from the dishwasher and check it for any kinks or blockages. If you find any, straighten out the hose or remove the blockage. Finally, reconnect the hose to the dishwasher and turn on the power.
10. Water Pump Belt
If your Hotpoint dishwasher isn’t draining, there’s a good chance the water pump belt has come off.
The water pump belt connects the motor to the pump and helps move the water through the dishwasher. If this belt is broken or worn out, it can prevent the dishwasher from draining properly.
You can check the water pump belt to see if it needs to be replaced by following these steps:
- Unplug the dishwasher and turn off the water supply.
- Remove the lower access panel and look for the water pump.
- The water pump will have a belt connected to it. Check to see if the belt is broken or loose.
- If the belt is damaged, you will need to replace it.
Related:
- 14 Reasons Why Kenmore Dishwasher Not Draining: How to Fix
- 13 Reasons Why Kitchenaid Dishwasher Not Draining: How to Fix
- 12 Reasons Why Bosch Dishwasher Not Draining: How To Fix
- 17 Reasons Why Samsung Dishwasher Not Draining: How to Fix It Quickly
- Why Is Frigidaire Dishwasher Not Draining? (16 Reasons) How to Fix the Problem
- 15 Reasons Why Whirlpool Dishwasher Is Not Draining: How To Fix
- How to Fix a GE Dishwasher That Is Not Draining (20 Reasons)
Hotpoint dishwasher not draining at end of cycle?
If your Hotpoint dishwasher is not draining properly, there are a few possible causes. The first thing to check is the drain hose. If the hose is kinked or blocked, it could be preventing water from draining properly.
Another possibility is that the garbage disposal is clogged. If the disposal is clogged, it can cause water to back up into the dishwasher. Finally, if the dishwasher is not draining properly, it could be due to a problem with the pump or motor.
If you’re not sure what’s causing the problem, we recommend calling a professional for help.
Old Hotpoint dishwasher not draining?
If your dishwasher isn’t draining properly, there could be a few different causes. The most common cause is a clogged drain hose. Other possible causes include a clogged sink trap, a faulty garbage disposal, or a damaged dishwasher pump.
To fix a dishwasher that isn’t draining, start by checking the drain hose for clogs. If the hose is clear, then check the sink trap for clogs. If neither of these are the problem, then you may need to replace the dishwasher pump.
New Hotpoint dishwasher not draining?
If your new Hotpoint dishwasher isn’t draining, there could be a few different causes. First, check to make sure that the drain hose is properly connected and not kinked or blocked.
Next, clean the filters to remove any debris that may be causing a blockage. Finally, if your dishwasher still isn’t draining properly, you may need to call a technician for further assistance.
Hotpoint Aquarius dishwasher not draining?
There are a few things that could be causing this problem. First, check to make sure that the dishwasher is plugged in and turned on. Next, check the drain hose to see if it is kinked or clogged.
Hotpoint slimline dishwasher not draining?
This is a common problem that can be caused by a few different things. Luckily, it’s usually an easy fix. Check out this blog post to learn more about the causes of dishwasher not draining and how to fix it.
If your Hotpoint slimline dishwasher isn’t draining properly, there are a few things that could be causing the issue. The most common cause is a blockage in the drain hose or pump. Other possible causes include a faulty float switch, a clogged filter, or a problem with the drainage pump.
If your dishwasher isn’t draining properly, the first thing you should do is check the drain hose for any blockages. If there is a blockage, you can try to clear it with a plunger or a plumbers’ snake. If that doesn’t work, you may need to replace the drain hose.
Another possible cause of dishwasher not draining is a faulty float switch. The float switch is responsible for turning the pump on and off as the water level changes. If the float switch is stuck in the “on” position, the pump will run continuously and the dishwasher won’t drain. To fix this, you’ll need to replace the float switch.
If your dishwasher has a clogged filter, that could also be causing it to not drain properly. The filter catches food and other debris that gets washed down the drain. Over time, it can become clogged and cause the dishwasher to not drain properly. To clean the filter, simply remove it and rinse it off with water.
Finally, a problem with the drainage pump could also be causing your dishwasher not to drain properly. If the pump is damaged or isn’t working properly, it won’t be able to pump the water out of the dishwasher. You’ll need to replace the pump if this is the case.
Hotpoint Dishwasher Drain Pump Keeps Running?
If your Hotpoint dishwasher’s drain pump keeps running, there are a few possible reasons why. First, check to make sure that the dishwasher is properly draining. If it isn’t, the drain pump will keep running in an effort to clear the water.
Another possibility is that something is blocking the dishwasher’s drainage system. This could be a piece of food or debris that’s caught in the pump itself, or it could be a clog further down the line. Clearing the blockage should stop the drain pump from running constantly.
If neither of these solutions solves the problem, you may need to replace the dishwasher’s drain pump. Fortunately, this is a relatively easy repair that you can do yourself. With a few simple tools, you should be able to get your dishwasher running like new again in no time.
Hotpoint Dishwasher Stuck on Drain?
If your Hotpoint dishwasher is stuck on the drain cycle, there are a few things you can do to try and fix the issue. First, check to make sure that the dishwasher is properly plugged into an outlet. Next, check the circuit breaker to see if it has been tripped. If neither of these are the issue, then the problem may be with the dishwasher itself.
Conclusion
After following the above steps, your dishwasher should be draining properly. If you are still having issues, please contact a professional for further assistance. Thanks for reading!
