14 Reasons Why GE Dishwasher Isn’t Starting: How To Fix

Last Updated on September 21, 2022 by Jason Nguyen

If your GE dishwasher isn’t starting, you’re likely wondering what you should do. This can be a frustrating experience, but don’t worry – we’re here to help!

In this blog post, we will discuss some common causes of dishwashers not starting and provide some tips on how to fix the issue. We hope that this information helps you get your dishwasher up and running again as quickly as possible!

Related: 9 Dishwasher Brands To Avoid and 3 Most Reliable Brands

My GE Dishwasher Isn’t Starting: What Should I Do?

1. Disconnected power

If your GE dishwasher isn’t starting, one possible reason is that it has lost power. This can happen if the circuit breaker trips or if there’s a problem with the wiring.

To fix this, you’ll need to reconnect the power and make sure that everything is in working order. If you’re not sure how to do this, you can always call an electrician.

2. Blown fuses

If your GE dishwasher isn’t starting, it could be because of a blown fuse. Check the main fuse box for a blown fuse, and replace it if necessary.

If you don’t see a blown fuse, check the circuit breaker. Reset the breaker if it’s tripped, and see if that fixes the problem.

3. The control panel is locked

If your GE dishwasher’s control panel is locked, there are a few things you can do to try and fix the issue. First, make sure that the dishwasher is properly plugged in and that the circuit breaker is not tripped.

If everything looks fine there, press and hold the Start/Reset button for about three seconds. This should unlock the control panel. If that doesn’t work, you may need to reset the dishwasher by unplugging it for a few minutes and then plugging it back in.

4. The door is not closed properly

If your GE dishwasher doesn’t seem to be starting, one possibility is that the door isn’t closed properly. Check to make sure that the door is latched shut and there’s no gap between the door and the frame.

If the door looks like it’s closed but the dishwasher still isn’t starting, try pressing down on the door to make sure it’s latched shut. If that doesn’t work, there may be something else going on.

5. Child Lock is ON

If your dishwasher has a Child Lock feature, it may be the reason why it isn’t starting. This feature is designed to prevent little hands from opening and closing the dishwasher door, which could cause an accident.

To turn off Child Lock, consult your owner’s manual for specific instructions. Once Child Lock is turned off, your dishwasher should start as normal.

6. Water Supply

If your dishwasher isn’t starting, the first thing you should check is the water supply. Make sure that the water shut-off valve under your sink is turned on all the way.

If it is, then check to see if there is a problem with your home’s main water supply.

Why does it fail?

If the water shut-off valve is turned off or there is no water coming into your home, then your dishwasher won’t be able to start.

What can you do about it?

If you can’t find the problem with the water supply, then you should call a plumber. They will be able to help you figure out what is wrong and get your dishwasher up and running again.

7. Drive Motor

The drive motor is what turns the dishwasher’s spray arms. If your dishwasher doesn’t start, the first thing to check is whether the motor is getting power. If it isn’t, you’ll need to replace it.

Why does it fail?

The most common reason for the drive motor to fail is because it has burned out. This can happen if the dishwasher is overloaded and trying to run a cycle with too much water.

How do I fix it?

If the drive motor has failed, you’ll need to replace it. You can find replacement motors online or at a local appliance parts store.

How to replace it?

To replace the drive motor, first disconnect the dishwasher from power. Then, remove the access panel on the bottom of the dishwasher. Locate the drive motor and unplug it from its electrical connection.

Remove the mounting screws that hold the motor in place, then pull out the old motor. Install the new motor in reverse order, making sure to reconnect the electrical connection.

Once the new motor is in place, replace the access panel and restore power to the dishwasher. Run a test cycle to make sure everything is working properly.

8. Check Cycle Settings

If your dishwasher doesn’t start, the first thing you should check is the cycle settings. Make sure that the cycle is set to “normal” and that the water temperature is set to “hot.”

9. Door Switch

The door switch is a safety device that keeps the dishwasher from operating when the door is open. The switch is located on the control panel near the door. If the switch is defective, the dishwasher won’t start.

To check the door switch:

-Open the dishwasher door and look for a button or lever on the control panel.

-Press the button or lever, and then close the door.

-If the dishwasher doesn’t start, press the button or lever again.

-If the dishwasher still doesn’t start, replace the door switch.

Replacing the door switch is a fairly easy repair that you can do yourself in about 15 minutes. Just follow these steps:

-Unplug the dishwasher and turn off the water supply.

-Remove the screws that hold the door panel in place.

-Disconnect the wire from the door switch.

-Remove the door switch and install a new one.

-Reconnect the wire to the new switch, replace the door panel, and screw it in place.

-Turn on the water supply and plug in the dishwasher.

-Run a test cycle to make sure the dishwasher is working properly.

10. Thermal Fuse

The thermal fuse is a safety device that trips when the dishwasher gets too hot. This can be caused by a number of things, such as a clogged heating element or vent.

If your dishwasher won’t start, check to see if the thermal fuse has blown. You can usually find it near the control panel or on the back of the dishwasher. If it has blown, you’ll need to replace it before your dishwasher will work again.

If your dishwasher is still not working after checking the thermal fuse, there are a few other things you can try.

First, make sure that the power cord is plugged in and that the circuit breaker hasn’t tripped. If everything looks good there, check the water supply to see if the dishwasher is getting enough water.

11. Door Latch

If your dishwasher doesn’t start, the first thing to check is the door latch. If it’s not latched shut, the dishwasher won’t run. Make sure that the latch is in the locked position, then close the door and try starting the cycle again.

If the door latch is secured and you’re still having trouble, the next thing to check is the door seal. A damaged or dirty door seal can prevent the dishwasher from starting. Inspect the seal for any rips, tears, or debris, and clean it off if necessary. If the door seal looks fine, try starting the dishwasher again.

12. Main Control Board

If your dishwasher isn’t starting, the first thing to check is the main control board. This part houses the start button, timer controls, and other key components. If any of these aren’t working properly, it could explain why your dishwasher isn’t starting.

Why does it fail?

There are a few reasons why the main control board might fail. First, there could be an issue with the start button itself. If this button is stuck or damaged, it won’t be able to send the signal to start the dishwasher.

Additionally, the control board could be faulty. If it’s not working properly, it won’t be able to send the correct signals to the other parts of the dishwasher.

How do I fix it?

If you’re having trouble with your main control board, there are a few things you can try. First, check the start button to make sure it’s not stuck or damaged. If it is, you’ll need to replace it.

Additionally, you can try resetting the control board by unplugging the dishwasher and then plugging it back in. If neither of these solutions works, you’ll need to replace the control board entirely.

The good news is that replacing a faulty main control board is usually a pretty straightforward repair. In most cases, you should be able to find the right replacement part by searching for your dishwasher’s model number.

Once you’ve got the new main control board, all you’ll need to do is remove the old one and install the new one in its place. If you’re not comfortable doing this yourself, you can always call in a professional appliance repair technician.

13. Touchpad

The touchpad is the control panel of your dishwasher that you use to select wash cycles, start or pause the dishwasher, and sometimes also to open or close the door. If your touchpad isn’t working, it could be because it’s dirty or damaged.

To clean your touchpad:

Unplug your dishwasher before cleaning it. Use a soft, damp cloth to wipe down the touchpad. If there are any stubborn stains, you can use a mild soap. Be sure to rinse the touchpad well and dry it completely before plugging your dishwasher back in and using it again.

14. Timer

The timer is an important part of the dishwasher. It helps the washer know when to start and stop. If your timer is not working, then your dishwasher may not start.

There are a few things that you can do to try and fix this problem. First, make sure that the power cord is plugged in correctly. Next, check to see if the timer is set correctly. If neither of these things work, then you may need to replace the timer.

Replacing the timer is not a difficult task. You can find timers at most hardware stores. Once you have the new timer, simply remove the old one and install the new one according to the instructions.

Related:

GE Dishwasher Won’t Start Just Beeps?

ge dishwasher wont start just beeps

There are a few things that can cause this issue. Here are some tips on how to fix it.

The first thing you should check is the door latch. Make sure that it is properly closed and engaged. If not, simply close it and try starting your dishwasher again.

If the door latch is not the problem, then the next thing you should check is the water supply. Make sure that the water shut off valve is turned on and that there is enough water pressure. If not, turn on the water and try starting your dishwasher again.

If the water supply is not the problem, then the next thing you should check is the electrical supply. Make sure that the dishwasher is plugged in and that the circuit breaker is not tripped. If not, plug in the dishwasher and try starting it again.

GE dishwasher not starting beeps 3 times?

The first thing you should do if your GE dishwasher is not starting and beeps three times is to check the power source. Make sure that the dishwasher is plugged in and that there is power going to it.

If the dishwasher is plugged in and there is power to it, then the next thing you should check is the door switch. The door switch is located on the door of the dishwasher and it controls whether or not the dishwasher can start. If the door switch is defective, then the dishwasher will not be able to start.

To test the door switch, you can use a multimeter to check for continuity. If the door switch is defective, then you will need to replace it. The last thing you should check if your GE dishwasher is not starting and beeps three times is the control board.

The control board is located inside the dishwasher and it controls all of the functions of the dishwasher. If the control board is defective, then the dishwasher will not be able to start.

You can test the control board by using a multimeter to check for continuity. If the control board is defective, then you will need to replace it. These are the most common reasons why your GE dishwasher is not starting and beeps three times.

GE dishwasher not starting light blinking?

ge dishwasher not start light blinking

Here are some possible causes and solutions to fix the problem.

One potential reason your GE dishwasher’s not starting light is blinking could be due to a power issue. Make sure the dishwasher is plugged into a working outlet, and if it is, try resetting the circuit breaker.

Another possibility is that the door isn’t closed properly. check to make sure the door is shut all the way and that there’s nothing blocking it from latching.

If neither of those solutions fixes the problem, then it’s likely an issue with the dishwasher itself. You can try resetting it by unplugging it for 30 seconds and then plugging it back in. If that doesn’t work, you may need to call a repairman.

GE dishwasher not starting orange light blinking?

One of the most common reasons for an orange light blinking on a GE dishwasher is that the door is not fully closed. This can be easily fixed by opening and closing the door until it latch clicks into place.

Another common cause of an orange light blinking on a GE dishwasher is that something is blocking the detergent dispenser. This can be easily fixed by removing the obstruction and then restarting the dishwasher.

If neither of these solutions work, then the most likely cause is a faulty door switch. This can be easily fixed by replacing the door switch.

GE dishwasher not starting lights on?

If your GE dishwasher doesn’t start, the first thing to do is check the power. Make sure that the dishwasher is plugged into a working outlet and that the circuit breaker hasn’t tripped.

If the dishwasher is getting power, then the next thing to check is the door latch. The door latch must be engaged for the dishwasher to start. If the door latch is disengaged, then simply engage it and try starting the dishwasher again.

If the door latch is engaged and the dishwasher still isn’t starting, then there may be an issue with the control panel. The control panel could be faulty or it could have become disconnected from the main board.

To check the control panel, first unplug the dishwasher from power. Then remove the screws that secure the control panel to the main board. Once the control panel is removed, you should be able to see if it is faulty or if it has become disconnected.

GE dishwasher not starting wash cycle?

ge dishwasher not start wash cycle

Here are some possible causes and how to fix them.

If your GE dishwasher doesn’t seem to be starting the wash cycle, there could be a few different reasons why. First, check to make sure that the dishwasher is properly plugged in and that the power source is working. If that’s not the problem, then it could be an issue with the dishwasher’s door latch. Try opening and closing the dishwasher door to make sure that it’s properly latched.

If neither of those solutions seem to be working, then there could be a problem with the dishwasher’s control panel. If the control panel isn’t working properly, you may need to replace it.

GE dishwasher not starting start button flashing?

If your GE dishwasher doesn’t start when you push the start button, and the start button is flashing, it could be caused by a few different things. Here are some possible causes and how to fix them.

One possible cause is that the dishwasher isn’t getting power. Check to make sure that the dishwasher is plugged in and that there is power to the outlet. If the dishwasher is hardwired, check the circuit breaker.

Another possible cause is that the door isn’t closed properly. Make sure that the door is shut all the way and latched.

If neither of these things seem to be the problem, then there may be something wrong with the start button itself. Try pressing and holding the start button for a few seconds. If that doesn’t work, you may need to replace the start button.

Old GE dishwasher not starting?

Here are some possible causes and how to fix them.

One possible reason why your old GE dishwasher isn’t starting could be because the door latch is not engaging properly. To fix this, make sure that the door is firmly closed and check the door latch for any damage. If the door latch appears to be damaged, you will need to replace it.

Another possible reason why your dishwasher isn’t starting could be because the start switch is not working properly. To test this, you will need to access the control panel and press the start switch. If the switch does not click or feels loose, you will need to replace it.

If your dishwasher still does not start, there could be an issue with the electrical supply. First, check to make sure that the dishwasher is plugged into a working outlet. If the dishwasher is plugged in and still not working, you will need to call a qualified electrician to check the wiring.

GE profile dishwasher not starting?

If your GE profile dishwasher doesn’t start, the first thing to check is whether there’s power going to it. If the dishwasher is plugged in but still not working, you may have a tripped circuit breaker or a blown fuse.

Another possible reason why your GE profile dishwasher won’t start is that the door isn’t shut properly. The dishwasher won’t start if the door is open or if there’s something blocking it from closing completely.

If you’ve checked for power and made sure the door is shut, but your GE profile dishwasher still won’t start, then there may be an issue with the controls. If the control panel isn’t working, you’ll need to replace it.

If your GE profile dishwasher is still not starting, there may be an issue with the water supply. Check to make sure the water shut-off valve is turned on and that there’s enough water pressure. If neither of these is the problem, then the issue may be with the water inlet valve.

GE nautilus dishwasher not starting?

This is a common problem that can have a few different causes. Most often, it is simply due to a power outage or a tripped circuit breaker. Another common cause is a faulty door switch. If the door switch is not working properly, it will prevent the dishwasher from starting.

To troubleshoot this problem, first check to see if there is power to the dishwasher. If the dishwasher is plugged into an outlet, check to see if the outlet has power. You can do this by plugging in another appliance to the outlet. If the other appliance does not work, then there is no power to the outlet and you will need to reset the circuit breaker.

If there is power to the dishwasher, then the next step is to check the door switch. The door switch is located on the control panel of the dishwasher. To test the door switch, open and close the dishwasher door. If you hear a clicking sound, then the door switch is working properly. If you do not hear a clicking sound, then the door switch is most likely the problem.

If the door switch is not the problem, then the next step is to check the control panel. The control panel may have a loose wire or it may be defective. If you see any loose wires, tighten them up. If the control panel does not seem to be working, then it will need to be replaced.

GE portable dishwasher not starting?

If your GE portable dishwasher isn’t starting, the first thing you should check is the door latch. Make sure it’s completely closed and locked. If that doesn’t work, try resetting the dishwasher by unplugging it for 30 seconds and then plugging it back in.

If those two solutions don’t work, the problem could be with the dishwasher’s control panel. First, try cleaning it with a soft cloth and soapy water. If that doesn’t work, you may need to replace the control panel.

GE dial dishwasher not starting?

Here are some common causes and how to fix them.

If your GE dishwasher isn’t starting, there could be a few different reasons why. Here are some of the most common causes:

-The door is not closed correctly or the latch is not engaged

-There is no water supply to the dishwasher

-The circuit breaker has tripped

-There is a problem with the dishwasher’s motor

If the door is not closed correctly or the latch is not engaged, make sure that the door is closed all the way and that the latch is in the locked position. If there is no water supply to the dishwasher, check to make sure that there is water available at the household water supply. If the circuit breaker has tripped, reset it and see if that solves the problem. If there is a problem with the dishwasher’s motor, you may need to call a repairman to come and take a look at it.

Conclusion

If your GE dishwasher isn’t starting, there are a few things you can try to fix the problem. First, check to make sure that the dishwasher is plugged in and that the circuit breaker hasn’t been tripped.

If those things are fine, then you may need to replace the door switch or control board. You can find instructions for how to do that online or in the owner’s manual. If you’re still having trouble, then it’s time to call a repairman.

Hopefully, one of these solutions will fix your dishwasher so you can get back to using it again. Thanks for reading!