Last Updated on November 25, 2023 by Kimberly Crawford
If your Samsung refrigerator isn’t cooling, don’t worry – we can help! In this blog post, we will provide you with a few tips on how to fix the issue. Sometimes all it takes is a simple adjustment to get your fridge back up and running properly. So read on for some helpful advice, and get that Samsung refrigerator cooling again in no time!
Related: 7 Refrigerator Brands To Avoid and 5 Most Reliable Brands
Reasons Why Samsung Refrigerator Not Cooling and How To Fix It
1. Check the door.
If the door is not closed properly, the fridge will not be able to maintain a consistent temperature, and your food will not stay fresh for as long. Make sure that the door is completely closed every time you use it.
You should also check to see if there are any cracks or holes in the door seal. If there are, air can escape and cause the fridge to work harder to maintain a consistent temperature. To fix this, you can either replace the seal or use a door sealant.
2. In demo mode.
This mode is usually used in stores to display the refrigerator before it is sold.
To exit demo mode, press and hold the power save and lightning bolt buttons for three seconds. The control panel will beep and the display will return to normal operation.
3. Avoid sunlight.
The sun’s heat can cause the compressor to work harder than it needs to. If your refrigerator is in direct sunlight, try moving it to a different location.
Also, make sure that the air vents are not blocked. Blocked air vents can cause the refrigerator to overheat and stop working.
4. Overloaded.
Check if the refrigerator is overloaded and blocking air vents. An overstocked fridge can cause poor cooling. To fix this, remove some of the items from your fridge.
If your Samsung refrigerator is still not cooling, there are a few other things you can check. Make sure that the fridge is set to the correct temperature.
The optimal setting for a refrigerator is between 37 and 40 degrees Fahrenheit. If the fridge is set too low, it won’t cool properly. Conversely, if it’s set too high, the fridge will use more energy than necessary to maintain the cold temperature.
5. Condenser Coils.
These are the coils located on the back of your fridge, and they play a vital role in the cooling process.
If these coils are dirty, it can cause your fridge to work harder than it needs to, which can lead to premature failure.
Cleaning your condenser coils on a monthly basis is a good way to keep them operating at peak efficiency.
Why does it fail?
The most common reason for a refrigerator to stop cooling is that the condenser coils are dirty. The coils are located on the back of the fridge, and they help to release the heat that is generated by the fridge.
If the coils are covered in dust or dirt, they will not be able to release the heat properly, and the fridge will not be able to maintain a cool temperature.
Another reason for the coils to become dirty is if they are located near an air vent. The vents can blow dust and dirt onto the coils, which will eventually cause them to become clogged.
How to fix it?
The best way to clean the condenser coils is to use a vacuum cleaner with a brush attachment. You will need to remove the back panel of the fridge in order to access the coils.
Once you have removed the panel, simply use the brush attachment on the vacuum cleaner to remove any dust or dirt from the coils.
If you are having difficulty reaching the coils, you can also use a coil cleaning brush. These brushes are specifically designed to reach deep into the coils and remove any buildup.
After you have cleaned the coils, you should replace the back panel and plug the fridge back in. Once it is plugged in, turn on the fridge and let it run for a few hours to see if the problem has been fixed.
If the fridge is still not cooling properly, you may need to call a professional for further assistance.
6. Evaporator Coils are Frosted Over.
If your Samsung refrigerator is not cooling, one possible reason is that the evaporator coils are frosted over.
The defrost timer might be turned off, or set for too long a time interval. Check the instructions in your owner’s manual to see how to reset the defrost timer.
Why does it fail?
The fridge has to work harder to cool down. This causes the compressor to overheat and eventually fail.
What can you do about it?
If your fridge is starting to frost over, you should clean the coils. You can do this yourself by unplugging the fridge, removing the back panel, and using a brush or vacuum attachment to remove the dust and debris.
If you’re not comfortable doing this yourself, you can always call a professional. They’ll be able to clean the coils and get your fridge back up and running in no time!
7. Evaporator Fan Motor.
The evaporator fan motor draws air over the evaporator coils and through the refrigerator, cooling it. If your evaporator fan motor is not working, your fridge will not cool properly.
Why does it fail?
The main reason the evaporator fan motor fails is because of a build-up of ice and frost on the coils. This causes the motor to overheat and eventually burn out.
There are a few things you can do to prevent this from happening:
-Make sure your fridge is properly sealed so that cold air doesn’t escape.
-Clean the coils regularly to prevent a build-up of ice and frost.
-If you notice your fridge isn’t cooling properly, turn it off immediately and call a repairman.
8. Damper Control Assembly.
This is the part of the refrigerator that controls the airflow. If this assembly is not working properly, it could cause your refrigerator to not cool properly.
Why does it fail?
There are a few reasons why the Damper Control Assembly could fail.
The most common reason is that the assembly itself is dirty or damaged. Another possibility is that the fridge isn’t getting enough power, which can cause the damper to not open properly.
How to fix it?
If the problem is that the damper is dirty or damaged, you’ll need to replace it. However, if the problem is that the fridge isn’t getting enough power, you’ll need to check the wiring and make sure everything is properly connected.
Replacing the Damper Control Assembly is a pretty simple process. You can find the assembly at your local hardware store. Once you have the new assembly, just follow the instructions in your fridge’s manual to install it.
If you’re having trouble finding the right part or don’t feel comfortable replacing it yourself, you can always call a refrigerator repair service. They’ll be able to help you troubleshoot the problem and get your fridge back to working properly in no time.
9. Thermistor.
The thermistor is a key component in your Samsung refrigerator that helps to regulate the internal temperature.
If the thermistor is not working properly, it can cause the fridge to not cool properly. There are a few signs that you can look for to see if your thermistor may be going bad.
One sign is if you notice that your fridge is not cooling evenly. This means that some areas of the fridge may be warmer than others.
Another sign is if the fridge is taking longer than usual to cool down after you have added new food or drinks.
Why does it fail?
There are several reasons why a thermistor might fail. The most common reason is age and wear. Over time, the material in the thermistor can break down, causing it to become less accurate.
Another reason for failure is damage. This can happen if the refrigerator is dropped or banged around too much. If the fridge is exposed to extreme temperatures, the thermistor can also become damaged.
How to fix it?
If your thermistor is failing, you’ll need to replace it. This is a fairly simple repair that you can do yourself. First, disconnect the power to the fridge.
Then, remove the panel on the back of the fridge to access the thermistor.
Once you have located the thermistor, unplug it from its socket and plug in the new one. Replace the panel and turn the power back on. Your fridge should now be cooling properly.
If you’re not comfortable doing this repair yourself, you can always call a professional. Samsung offers a refrigerator repair service for its customers. You can schedule an appointment online or by calling customer service.
10. Start Relay.
If your refrigerator is not cooling, one of the first things to check is the start relay. The start relay is a small device that helps the compressor turn on.
If this relay is bad, the compressor will not turn on and your refrigerator will not cool.
Why does it fail?
The main reason the start relay fails is because of a bad capacitor. The capacitor is what provides the initial boost of electricity to get the compressor started. Once the compressor is running, the capacitor is no longer needed.
A failed capacitor will prevent the refrigerator from starting up correctly, and it will eventually cause the fridge to stop cooling altogether.
Other potential causes for a refrigerator not cooling include a failed compressor, low Freon levels, or a dirty condenser coil. But in most cases, it’s the start relay.
How to fix it?
If your refrigerator is not cooling, the first thing you should check is the start relay. A failed start relay is the most common reason for a fridge to stop cooling.
To check it, open up the back panel of your fridge and locate the compressor. The start relay will be mounted on or near the compressor.
Once you’ve found it, remove the two wires going to the start relay and use a multimeter to test for continuity. If there is no continuity, then the start relay needs to be replaced. You can find replacement relays online or at most hardware stores.
If your fridge is still not cooling after replacing the start relay, then you may have a more serious problem. Check the compressor and Freon levels next.
A failed compressor is much less common than a failed start relay, but it can still happen. And if your fridge is low on Freon, it will also cause the fridge to stop cooling.
11. Start Capacitor.
The start capacitor is located in the compressor of your Samsung refrigerator. If your fridge is not cooling, it may be because the start capacitor is damaged or has failed.
Why does it fail?
The most common reason for a start capacitor to fail is age and extended use. Over time, the capacitor will slowly lose its ability to hold a charge and will eventually need to be replaced. Other causes of failure can include damage from a power surge or voltage spike.
How to fix it?
If your start capacitor has failed, you will need to replace it with a new one. You can purchase a replacement capacitor at most hardware or home improvement stores. Be sure to take the old capacitor with you to ensure you get the correct size and voltage rating.
Once you have the new capacitor, simply remove the cover from the refrigerator and locate the old capacitor.
Disconnect the wires from the old capacitor and then remove it from the refrigerator. Install the new capacitor in the same location and reconnect the wires. Replace the cover on the refrigerator and you should be good to go!
12. Temperature Control Board.
This board controls the compressor and fans, and it may be defective if your fridge is not cooling properly.
You can test the temperature control board by using a multimeter to test for continuity. If there is no continuity, then you will need to replace the board.
Why does it fail?
The most common reason for the temperature control board to fail is because of a power surge. A power surge can damage the electronic components on the board and cause it to malfunction.
If you have a Samsung refrigerator that is not cooling, it is likely that the temperature control board is the problem.
How do you fix it?
If the temperature control board is the problem, you will need to replace it. You can purchase a replacement board from Samsung or from an authorized Samsung dealer.
Be sure to get the correct model number for your refrigerator so that you get the right board.
You can find the temperature control board inside the fridge, near the back. It will be a small, rectangular black box with wires coming out of it. You will need to remove the panel on the back of the fridge to access it. Be sure to unplug your fridge before you begin this repair.
Installing the new board is relatively easy. First, disconnect the power to your refrigerator. Next, remove the old board and replace it with the new one. Finally, reconnect the power and test your refrigerator to make sure that it is cooling properly.
13. Defrost Control Board.
This part controls the defrost cycle of the refrigerator and if it is not working properly, frost can build up on the evaporator coils.
If you suspect that this is the issue, check to see if there are any error codes displayed on the control board. If you see an error code, consult your owner’s manual to find out what it means.
Why does it fail?
The most common reason for the defrost control board to fail is because of a power surge. When there is a power outage, the defrost control board will reset itself. This can cause it to fail.
Another reason the defrost control board may fail is because of age. over time, the components on the board can degrade and stop working.
If the defrost control board fails, the refrigerator will not be able to properly defrost itself. This can cause the fridge to overheat and the food inside to spoil.
How to fix it?
If the defrost control board fails, it will need to be replaced. This is a relatively simple repair that can be done by a qualified technician.
14. Defrost Thermostat.
The defrost thermostat is located in the freezer compartment and controls the refrigerator temperature. If the defrost thermostat is not working, the refrigerator will not cool properly.
To test the defrost thermostat, remove it from the freezer compartment and place it in a cup of ice water. The thermostat should turn on and off at the correct temperature. If it does not, replace it with a new one.
You can find the defrost thermostat at your local hardware store or online. Be sure to get the correct model for your refrigerator.
Why does it fail?
The defrost thermostat is designed to shut off the flow of electricity to the compressor and fan motors when the refrigerator temperature gets too warm. However, over time, this component can fail due to normal wear and tear. When this happens, it can cause your fridge to stop cooling properly.
If you suspect that your defrost thermostat is failing, you’ll need to test it to be sure. The best way to do this is with a multimeter. Simply attach the probes to the thermostat’s terminals and check for continuity. If there is none, then the thermostat is likely faulty and will need to be replaced.
Fortunately, replacing a defrost thermostat is a relatively easy repair that you can do yourself. Just be sure to unplug your fridge before beginning any work on it. Then, remove the panel or cover from the back of the fridge to access the thermostat. Once you have located it, disconnect the wires and unscrew it from its mounting bracket.
16. Defrost Timer.
If your refrigerator has a defrost timer, it may be the reason why your fridge is not cooling. The timer controls the amount of time that the compressor runs. If the timer is not working properly, it can cause the compressor to run too much or too little.
To test if the defrost timer is working properly, you’ll need to locate it. The defrost timer is usually located in the refrigerator near the control panel. Once you’ve located it, turn it clockwise until you hear a click.
If the defrost timer is not working properly, it will need to be replaced. You can purchase a new one at your local hardware store or online.
If you’re not sure how to replace the defrost timer, we recommend hiring a professional. A professional will be able to properly diagnose the problem and make the necessary repairs.
17. Main Control Board.
The main control board is the heart of your fridge, so if it’s not working properly, it can cause your fridge to stop cooling. Luckily, this is an easy fix and you can do it yourself!
Simply order a new main control board from Samsung and follow the instructions in the owner’s manual to install it.
Why does it fail?
The main control board is the “brain” of your refrigerator. It regulates the temperature and tells the compressor when to run. If it fails, the entire fridge will stop working. The most common reason for failure is a power surge.
How do you fix it?
If your main control board has failed, you will need to replace it. You can do this yourself if you are handy with tools, or you can hire a professional. Either way, it is a fairly simple repair.
Related:
- 11 Reasons Why LG Refrigerator Not Cooling? {How to Fix}
- 17 Reasons for Kenmore Refrigerator Not Cooling and How to Fix It
- GE Hotpoint Refrigerator That’s Not Cooling? {Here’s How To Fix It}
- Frigidaire Side by Side Refrigerator Not Cooling? How to Fix It
- Frigidaire Refrigerator Not Cooling? 6 Reasons Why and How to Fix Them
- 8 Reasons for GE Refrigerator Not Cooling and {How To Fix}
- 10 Reasons For Whirlpool Refrigerator Not Cooling and {How To Fix}
- 10 Reasons KitchenAid Refrigerator Not Cooling? Here’s the Fix
- 10 Reasons Maytag Refrigerator Not Cooling? Here’s What to Do
Why is Samsung refrigerator not cooling but freezer is fine?
There could be a few reasons why your Samsung refrigerator is not cooling but the freezer is fine. One reason could be that the fridge is set too high and needs to be adjusted.
Another possibility is that there is something blocking the airflow to the fridge, such as food or containers.
Why is Samsung fridge not cooling but light is on and how to fix?
If your Samsung fridge is not cooling but the light is on, there are a few possible reasons.
First, check to make sure that the power cord is plugged in and that the outlet is working.
Next, check to see if the control panel is set to the correct setting.
If it is, then the next step is to check the condenser coils. These coils are located on the back of the fridge and they help to cool the air inside.
If they are dirty, they will not be able to do their job properly. Clean them off with a brush or vacuum attachment and then try turning on the fridge again.
If your Samsung fridge still is not cooling after following these steps, then you may need to call a repairman. There could be an issue with the compressor or with the Freon levels. Either way, it is best to have a professional take a look at it to avoid further damage.
Why is Samsung side by side refrigerator not cooling and how to fix?
There could be a few reasons why your Samsung side by side refrigerator is not cooling. It could be due to a dirty condenser coils, low refrigerant levels, or a problem with the evaporator fan.
To fix this issue, you can start by cleaning the condenser coils. If that does not work, you may need to recharge the refrigerant levels or replace the evaporator fan.
Why is Samsung double door fridge not cooling and how to fix?
There could be a few reasons why your Samsung double door fridge is not cooling. One reason could be that the condenser coils are dirty.
When the coils are dirty, they can’t dissipate heat properly, which will cause the fridge to work harder to cool down, and eventually lead to the fridge not being able to cool at all.
Another reason could be that the evaporator fan motor is not working properly. This fan blows air over the coils to help cool them down and circulate cold air throughout the fridge.
If the fan motor is not working, then the coils will not be able to properly dissipate heat, and the fridge will not be able to cool properly.
Samsung double door fridge not cooling lower part?
If your Samsung double door fridge is not cooling the lower part of the fridge, there are a few possible causes.
One possibility is that the air vents in the fridge are blocked. If the air vents are blocked, air cannot flow properly through the fridge, and this can cause problems with cooling.
Another possibility is that the freezer door is not sealing properly. If the freezer door is not sealing properly, cold air can escape from the freezer and into the fridge, making it harder for the fridge to stay cool.
Samsung refrigerator not cooling after power outage?
This can be a very frustrating problem. Luckily, there are a few things you can do to try and fix the issue.
First, check to make sure that the power cord is plugged in correctly. Next, check the circuit breaker or fuse box to see if the power has been turned off to the refrigerator. If neither of these are the problem, then it is likely that the power outage has caused a problem with the compressor.
If your refrigerator has a warranty, then you should contact Samsung to see if they will cover the cost of repairs. If not, then you will need to decide whether or not you want to pay for repairs yourself or buy a new refrigerator.
Samsung refrigerator not cooling after unplugging?
Here are some possible causes and solutions:
-The refrigerator may be in defrost mode. The defrost timer controls how often the unit enters defrost mode. If the fridge is not cooling properly, it may be due to the defrost timer not working correctly. Check the owner’s manual for instructions on how to test and replace the defrost timer.
-There may be something blocking the air vents. Check to make sure that there is nothing blocking the air vents on the back or sides of the fridge.
-The condenser coils may be dirty. If the condenser coils are dirty, they won’t be able to properly dissipate heat, which can cause the fridge to not cool properly. Clean the coils with a coil cleaning brush or by vacuuming them with the upholstery attachment on your vacuum cleaner.
-The door gasket may be worn out. If the door gasket is worn out, it won’t create a tight seal when the door is closed, which can cause warm air to enter the fridge and cause it to not cool properly. Inspect the door gasket for cracks or gaps and replace it if necessary.
Samsung refrigerator not cooling to set temperature?
Here are some tips to fix the issue.
If your Samsung refrigerator is not cooling to the set temperature, there are a few things you can do to try and fix the issue.
First, check and make sure that the fridge is set to the correct temperature. If it is set too low, it may not be able to reach the desired temperature. Also, check and make sure that the fridge is not in power-saving mode. If it is, it will run at a lower temperature to save energy.
If neither of those solutions fix the issue, there may be something wrong with the fridge itself. Try unplugging it for a few minutes and then plugging it back in. This can sometimes reset the fridge and fix any issues. If that doesn’t work, you may need to call a repairman to take a look at your fridge.
Samsung french door refrigerator not cooling?
This is a common problem. There are a few things you can do to fix it.
First, check the back of the fridge. Make sure that the coils are clean and free of dust. If they’re dirty, they won’t be able to effectively transfer heat, and your fridge won’t cool properly.
Next, check the door seals. If they’re worn or damaged, they might not be sealing properly, allowing cold air to escape.
If neither of those fixes the problem, you might need to call a repairman. But don’t despair! Many people have had this same problem and been able to fix it on their own. With a little troubleshooting, you should be able to get your fridge working again in no time.
Samsung inverter refrigerator not cooling?
This is a common issue that can be easily fixed. First, check to make sure that the refrigerator is properly plugged in. Next, check to see if the power cord is damaged. If neither of these are the problem, then the issue may be with the compressor.
The compressor is what circulates the coolant and keeps the fridge cold. If the compressor is not working, then the fridge will not be able to stay cold.
There are a few things that you can do to try and fix a compressor issue. First, you can try resetting the refrigerator.
To do this, unplug the fridge for 24 hours. After 24 hours, plug the fridge back in and see if it is cooling properly. If the fridge is still not cooling, then the next step would be to call a repairman.
Samsung twin cooling refrigerator not cooling?
This could be due to a number of reasons. Let’s take a look at some of the most common reasons why your refrigerator might not be cooling properly.
One of the most common reasons for a fridge not cooling is because the evaporator coils are dirty. When these coils get covered in dust and dirt, they can’t efficiently absorb heat, which means your fridge can’t properly cool down.
Another common reason for a fridge not cooling is because the condenser coils are dirty. These coils help release heat from the fridge, so if they’re covered in dirt and dust, it can make your fridge work harder to try to cool down, which can lead to it not cooling properly.
If your fridge is not cooling properly, it’s also possible that there is an issue with the door seal. If the door seal is damaged or not sealing properly, cold air can escape and warm air can enter, which can cause your fridge to have to work harder to maintain a cool temperature.
Samsung twin cooling plus refrigerator not cooling?
Here are some troubleshooting tips.
First, check to see if the refrigerator is properly plugged in and that the outlet is working. If the outlet is not working, you’ll need to call an electrician. If the outlet is working, but the refrigerator still isn’t cooling, try resetting it by unplugging it for 30 seconds and then plugging it back in.
If the refrigerator still isn’t cooling, the next step is to check the condenser coils. These coils are usually located at the back of the fridge and they help to cool the air inside. If they’re dirty, they won’t be able to do their job properly and your fridge won’t be able to cool properly. Clean the coils with a coil brush or by vacuuming them.
Brand new Samsung refrigerator not cooling?
This could be due to a variety of reasons. Let’s take a look at some of the most common causes:
-Your refrigerator might not be properly plugged into the wall outlet. Check to make sure that the power cord is plugged in securely.
-The temperature control might not be set correctly. Make sure that the thermostat is set to the correct setting for your needs.
-There might be something blocking the airflow to the refrigerator. Check to make sure that there is nothing blocking the vents on the back or sides of the fridge.
How do I reset my Samsung refrigerator not cooling?
If your Samsung refrigerator is not cooling, you may need to reset it. To do this, first unplug the refrigerator from the power outlet. Then, remove the back panel of the fridge and locate the reset button.
Once you’ve found the reset button, press and hold it for five seconds. After five seconds have passed, plug the fridge back into the power outlet and press the reset button again. Your fridge should now be reset and should start cooling again.
Does a Samsung refrigerator have a reset button?
The answer is yes, Samsung refrigerators do have a reset button. This button is usually located on the back of the refrigerator near the bottom. In some cases, it may be located on the side or front of the fridge. If you cannot find the reset button, consult your refrigerator’s manual for more information.
Pressing the reset button on your Samsung refrigerator will typically reset the ice maker and water dispenser. It is also known to fix some common issues such as the fridge not cooling properly or the ice maker not working. If your fridge is still not working after pressing the reset button, you may need to service it or call a technician.
Conclusion
If your Samsung refrigerator is not cooling, there are a few things you can do to fix it. First, make sure that the fridge is properly plugged in and that the power cord is not damaged. Next, check to see if the fridge is set to the correct temperature. If neither of these solutions work, then you may need to call
