12 Reasons Why Kenmore Elite Refrigerator Not Cooling – {FIXED}

If your Kenmore Elite refrigerator is not cooling, you are likely experiencing a lot of frustration. This can be a very costly appliance to repair, so it is important to troubleshoot the issue and determine the cause. In this blog post, we will discuss some common causes of this problem and offer some solutions that may help you get your refrigerator up and running again.

Reasons Why Kenmore Elite Refrigerator Not Cooling: What to Do?

1. Condenser Coils.

The condenser coils are the part of your fridge that get hot when the compressor is running.

If these coils are dirty, the heat can’t be transferred away from the fridge properly and it will cause the fridge to run more than it should.

Why does it fail?

Dirty condenser coils are the most common reason that fridges fail to cool properly. If your fridge isn’t cooling, check the coils and clean them if they’re dirty.

How to fix it?

To clean your condenser coils, unplug your fridge and vacuum them with a brush attachment. You can also clean them with a solution of 50% water and 50% vinegar.

Once you’ve cleaned the coils, plug your fridge back in and check to see if it’s cooling properly. If it isn’t, you may need to call a repairman.

How can I prevent it from happening again?

To prevent your condenser coils from getting dirty, vacuum them every six months. You can also clean them with a solution of 50% water and 50% vinegar every three months.

Doing this will help your fridge run more efficiently and prevent it from breaking down.

2. Condenser Fan Motor.

The condenser fan motor helps circulate air through the refrigerator. If the condenser fan motor is not working, the refrigerator will not cool properly.

This part is located in the back of the refrigerator, behind the panel. To access it, you will need to remove the panel.

Why does it fail?

The most common reason for the condenser fan motor to fail is because it has become clogged with dust. The dust can build up over time and eventually cause the motor to overheat and fail.

How to fix it?

The best way to fix this problem is to clean the condenser fan motor. You can do this by unplugging the refrigerator and removing the panel.

Then, use a brush or vacuum to remove the dust from the motor. Once the motor is clean, you can reinstall the panel and plug the refrigerator back in.

How can I prevent it from happening again?

To prevent the condenser fan motor from becoming clogged with dust, you should regularly clean the back of the refrigerator.

3. Evaporator Fan Motor.

The evaporator fan motor draws air over the evaporator coils and circulates it throughout the refrigerator and freezer compartments.

Why does it fail?

The evaporator fan motor can fail either mechanically or electrically.

A failed evaporator fan motor will cause the refrigerator to not cool properly. If the evaporator fan motor is not working, the air in the refrigerator will not be circulated and will not be cooled. The evaporator coils will frost over and the freezer compartment will become too cold.

How to fix it?

To test the evaporator fan motor, first make sure that there is power to the refrigerator. Then open the freezer door and listen for the evaporator fan motor to come on.

If you do not hear the fan running, then the evaporator fan motor is failed and will need to be replaced.

How can I prevent it from happening again?

You can prevent the evaporator fan motor from failing by regularly cleaning the coils and making sure that there is nothing blocking the airflow to the coils.

4. Start Relay.

The start relay is a small device that sits on top of the compressor. Its job is to provide power to the compressor when it first starts up. If the start relay is bad, the compressor will not be able to start.

Why does it fail?

The start relay can fail for a number of reasons. The most common reason is simply because it has worn out from use. Other times, the start relay can fail because of a problem with the compressor itself.

How do you know it’s bad?

If the start relay is bad, the compressor will not be able to start. This can be tested by turning on the fridge and listening for the compressor to start. If you do not hear the compressor, then the start relay is likely bad.

What are the symptoms?

The most common symptom of a bad start relay is that the fridge will not get cold. The compressor will not be able to turn on, so the fridge will not be able to cool down.

How do you fix it?

The best way to fix a bad start relay is to replace it with a new one. This is a relatively easy repair that can be done by most people. However, if you are not comfortable doing this repair, you can always call a professional.

If the start relay is bad, the easiest way to fix it is to replace it. You can find replacement relays online or at a hardware store. Be sure to get the correct size and type of relay for your fridge.

To replace the relay, simply remove the old one and screw in the new one. Tighten the screws so that the relay is secure. Once the new relay is in place, turn on the fridge and listen for the compressor to start. If you do not hear the compressor, then the start relay is likely bad.

How can I prevent it from happening again?

The best way to avoid having to replace your start relay is to regularly clean your fridge. This will help extend the life of the relay. You should also avoid putting too much strain on the compressor by not overloading your fridge with food.

If you do overload your fridge, the compressor will have to work harder and this can cause the start relay to fail prematurely.

5. Temperature Control Thermostat.

If your fridge isn’t cooling properly, one potential issue could be the temperature control thermostat.

This part is responsible for regulating the internal temperature of the refrigerator, so if it’s defective, it can cause the fridge to become too warm or too cold.

Why does it fail?

There are a few reasons why the temperature control thermostat might fail. It could be simply because it’s old and needs to be replaced, or it could be because of a power issue.

If there’s been a power outage or surge, that can sometimes cause the thermostat to fail. Another potential issue is dirt or debris build-up on the thermostat, which can prevent it from working properly.

How to fix it:

If you think the temperature control thermostat might be the issue, there are a few things you can do to try and fix it.

First, check to make sure there’s power going to the fridge. If the refrigerator is plugged in but the thermostat isn’t working, you may need to replace the fuse or reset the circuit breaker.

If that doesn’t work, you can try cleaning the thermostat with a soft cloth and some distilled vinegar. If neither of those solutions works, then you’ll need to replace the temperature control thermostat.

How can I prevent it from happening again?

There are a few things you can do to help prevent the temperature control thermostat from failing again.

First, make sure to keep the fridge clean and free of debris. Second, don’t put hot food directly into the fridge; let it cool down first. And finally, if there’s been a power outage or surge, make sure to unplug the fridge and then plug it back in again after a few minutes.

6. Start Capacitor.

The start capacitor gives the compressor a boost of energy to start up. If the refrigerator is not cooling, the start capacitor may be defective.

Why does it fail?

Over time, the capacitor can lose its ability to hold a charge.

How to test it:

You will need a multimeter to test the start capacitor. To do this, first disconnect the power to the refrigerator. Then remove the cap from the start capacitor and set your multimeter to Ohms.

Touch one lead of the meter to each terminal on the capacitor. If the reading is not close to zero, then the capacitor is defective and needs to be replaced.

How to replace it:

Replacing the start capacitor is a relatively easy repair. First, you will need to disconnect the power to the refrigerator. Then remove the cap from the start capacitor.

Next, use a pair of pliers to remove the wires from the old capacitor. Finally, attach the wires to the new capacitor and replace the cap.

How can I prevent it from happening again?

To prevent the start capacitor from going bad, you should regularly clean the coils on your refrigerator. Dirty coils can cause the compressor to overheat and fail. You should also replace the start capacitor every five years or so to be safe.

7. Temperature Control Board.

The temperature control board regulates the coldness of the fridge. If it’s not working properly, the fridge will be too warm.

To fix this, you’ll need to replace the board. Check your owner’s manual to see how to do this.

Why does it fail?

There are a few reasons why the temperature control board might fail. One is that the fridge isn’t getting enough power.

Another is that the board itself is faulty. If you’re not sure what’s causing the problem, you can always call a Kenmore repair technician to come take a look.

How to fix it?

If the problem is with the power supply, you’ll need to check the wiring and make sure everything is plugged in correctly. If the problem is with the board itself, you’ll need to replace it.

How much does it cost?

A new temperature control board will cost you around $100. However, if you have a Kenmore Elite fridge, the part will likely be covered under your warranty. So be sure to check that before you buy anything.

How can I prevent it from happening again?

There’s not really anything you can do to prevent the temperature control board from failing.

However, you can make sure that your fridge is getting enough power by regularly checking the wiring and making sure all the connections are tight.

You should also check the board itself for any signs of damage or wear and tear.

8. Thermistor.

The thermistor is a component in your refrigerator that helps to regulate the temperature. If this part becomes damaged or malfunctions, it can cause your fridge to stop cooling properly. In some cases, the thermistor may need to be replaced.

Why does it fail?

There are a few reasons why the thermistor might fail. It could be due to a build-up of dust or dirt, or it could simply be worn out from age and use. In some cases, the thermistor may have been damaged during installation or repair.

How to fix it?

If the thermistor is dirty, you can try cleaning it with a soft cloth. If it is worn out, you will need to replace it with a new one. In some cases, the thermistor may be damaged beyond repair and will need to be replaced.

How can I prevent it from happening again?

You can prevent the thermistor from failing by regularly cleaning your refrigerator and keeping it in good working condition. You should also avoid making any repairs or adjustments to the fridge that could damage the thermistor.

9. Compressor.

The compressor is the part of the fridge that circulates coolant and helps to maintain the proper temperature inside the appliance.

If your Kenmore Elite refrigerator is not cooling properly, one possible reason is a faulty compressor.

Why does it fail?

Compressors can fail for a variety of reasons. One common cause is simply wear and tear; over time, the moving parts inside the compressor can break down or become damaged.

Another possibility is that the fridge isn’t getting enough power; if there’s an issue with the electrical supply, the compressor may not be able to do its job properly.

How can I tell if the compressor is the problem?

If you suspect that the compressor is to blame for your fridge’s cooling issues, there are a few things you can check.

First, take a look at the back of the fridge; if the coils are hot to the touch, that’s an indication that the compressor is working overtime.

You can also listen for a humming noise; if the compressor is running but not cooling, it may be making a different sound than usual.

How to fix it?

If the compressor is the cause of your fridge’s cooling problems, you’ll need to replace it. This is a relatively straightforward repair, but it’s important to note that compressors are expensive; in most cases, it’s cheaper to simply buy a new fridge than to replace the compressor.

If you’re handy with tools and you’re comfortable working with electrical components, you may be able to replace the compressor yourself.

However, it’s usually best to leave this job to a professional. Not only can they properly diagnose the problem, but they’ll also have the necessary tools and equipment to do the repair safely.

How can I prevent it from happening again?

There’s not much you can do to prevent a compressor from failing. However, you can take some steps to prolong its life.

First, make sure that the fridge is properly ventilated; if it’s crammed into a tight space, the compressor has to work harder to circulate coolant, which will lead to premature wear and tear.

You should also clean the coils on a regular basis; dust and dirt can build up over time, causing the compressor to work less efficiently.

10. Main Control Board.

The main control board is the “brain” of your fridge, and it controls all the other components. If it’s not working properly, then your fridge won’t work at all.

There are a few things that can cause your main control board to fail, including a power surge, bad solder connection, or even a manufacturing defect. If your main control board is defective, you’ll need to replace it.

Why does it fail?

There are a few reasons why your main control board might fail. The most common reason is a power surge.

This can happen if there’s a power outage and your fridge is plugged into a surge protector. Other causes include a bad solder connection or manufacturing defect.

How to fix it?

Replacing the main control board is not a difficult task, but it does require some basic electronics knowledge.

You’ll need to be able to identify and solder components, and you should have a basic understanding of how circuit boards work. If you’re not confident in your abilities, you can always hire a professional to do the job for you.

Once you have the new main control board, simply install it in the same place as the old one and reconnect all the wires. Then, power on your fridge and check to see if it’s working properly. If not, then you may need to replace other components as well.

How can I prevent it from happening again?

There’s not really much you can do to prevent your main control board from failing. Power surges are the most common cause of failure, so you can try to avoid them by using a surge protector.

You can also try to be extra careful when handling the main control board, and make sure that all the connections are secure. Finally, you can try to buy a fridge from a reputable brand that has a good track record for quality.

11. System Freon.

The system Freon is a very important part of your refrigerator. It helps to keep the fridge cool and also maintains the correct pressure inside the fridge. If there is a problem with this part, then your fridge will not work properly and may even stop cooling altogether.

One common problem that can occur with the system Freon is that it can leak. This can be a very serious problem because if the Freon leaks out, then your fridge will not be able to keep itself cool.

Another problem that can occur with the system Freon is that it can become frozen. This can be a very serious problem because if the Freon is frozen, then it will not be able to circulate properly and your fridge will not work correctly.

Why does it fail?

There are many reasons why the system Freon can fail. One of the most common reasons is that it can become damaged. This can happen if the fridge is not properly maintained or if it is not used correctly.

Another reason why the system Freon can fail is that it can become clogged. This can happen if there is a lot of dirt or debris inside the fridge.

The last reason why the system Freon can fail is that it can become frozen. This can happen if the fridge is not properly maintained or if it is not used correctly.

How to fix it?

There are many things that you can do to fix the system Freon. One of the most common things that you can do is to replace the part. This can be a very simple process and it will usually only take a few minutes.

Another thing that you can do to fix the system Freon is to clean it. This can be a very simple process and it will usually only take a few minutes.

The last thing that you can do to fix the system Freon is to defrost it. This can be a very simple process and it will usually only take a few minutes.

How to prevent it?

There are many things that you can do to prevent the system Freon from failing. One of the most important things that you can do is to maintain your fridge properly. This means that you should clean it regularly and make sure that it is not overfilled.

Another thing that you can do to prevent the system Freon from failing is to use it correctly. This means that you should not overuse it or abuse it.

The last thing that you can do to prevent the system Freon from failing is to have it serviced regularly. This means that you should take it to a professional and have them check it for any problems.

12. Damper Control.

The Kenmore Elite refrigerator has a Damper Control that helps to regulate the air flow and keep the fridge at proper temperatures. If this control is set too low, it can restrict airflow and cause your fridge to stop cooling properly. You can find the Damper Control on the back of the fridge, near the top.

To fix this problem, simply adjust the Damper Control to a higher setting. You may need to experiment a bit to find the perfect setting, but once you do, your fridge should start cooling properly again.

How can I prevent it from happening again?

To prevent this problem from happening again, make sure that you keep the Damper Control clean and free of debris. Also, check it periodically to ensure that it is set at the proper setting. By doing these things, you can help to ensure that your Kenmore Elite refrigerator will continue to cool properly.

Related: 17 Reasons for Kenmore Refrigerator Not Cooling and How to Fix It

Kenmore elite refrigerator not cooling or freezing?

Here are some potential causes and solutions.

One potential reason your Kenmore elite refrigerator might not be cooling or freezing is because the condenser coils are dirty.

The condenser coils are responsible for removing heat from the fridge, so if they’re covered in dirt and dust, they won’t be able to do their job properly. To clean the coils, simply remove them from the fridge and use a brush or vacuum to remove any debris.

Another potential reason for your fridge not cooling or freezing could be due to a problem with the evaporator fan.

The evaporator fan is responsible for circulating air around the fridge, and if it’s not working properly, the air won’t be able to circulate and the fridge won’t be able to cool properly. To fix this, you’ll need to replace the evaporator fan.

Kenmore elite refrigerator not cooling but freezer works?

Here are some potential causes and solutions for this problem.

One potential cause of your Kenmore elite refrigerator not cooling but freezer works could be that the coils are dirty.

The coils help transfer heat from inside the fridge to outside, so if they’re covered in dirt or dust, it can affect how well they work. To clean the coils, unplug the fridge and vacuum them with a brush attachment.

Another potential cause could be that the fridge isn’t set to the right temperature. The ideal setting for a refrigerator is between 35-38 degrees Fahrenheit, so if your fridge is set too low, it might not be cooling properly.

To adjust the temperature, press the “Settings” button on the control panel and use the arrow keys to set it to the right temperature.

Related: 10 Reasons Why Kenmore Refrigerator Ice Maker Not Working: How to Fix

Kenmore elite refrigerator not cooling enough?

There are several possible causes and solutions to this problem.

One potential cause is that the refrigerator’s condenser coils are dirty. When the coils are clogged with dirt and dust, they can’t dissipate heat effectively, which can cause the fridge to run less efficiently and make it harder to keep things cool.

To clean your condenser coils, unplug your fridge and vacuum the coils with a brush attachment. You should do this every six months to keep your fridge running smoothly.

Another potential cause is that the refrigerator’s evaporator fan is not working properly. The evaporator fan circulates air over the evaporator coils, which helps to cool the air inside the fridge.

If the fan is not working properly, the air inside the fridge will not be circulated and cooled effectively. To check if the evaporator fan is working, open the freezer door and feel for air coming from the vents. If you don’t feel any air, or if the air feels warm, then the evaporator fan may need to be replaced.

Kenmore elite refrigerator not cooling after power outage?

Don’t panic! Here are some potential causes and solutions.

One possible reason for your Kenmore elite refrigerator not cooling after a power outage is that the power cord was disconnected. Simply reconnect the power cord to the outlet and press the reset button on the control panel. If this doesn’t work, check to see if there’s a tripped circuit breaker or blown fuse.

Another potential cause of your Kenmore elite refrigerator not cooling is that the condenser coils are dirty. The coils need to be cleaned every six months to ensure optimal performance. To clean the coils, simply remove any debris and vacuum them with a brush attachment.

Kenmore elite refrigerator not cooling error code?

If you see this error code on your fridge, it could be due to a variety of reasons. In this blog post, we’ll go over some of the potential causes and solutions for this error code.

One potential cause of the Kenmore elite refrigerator not cooling error code is a problem with the evaporator fan motor. This part of the fridge circulates air over the evaporator coils to help remove heat from the fridge. If the fan motor is not working properly, it could cause the error code to appear.

One solution for this problem is to check and see if the fan motor is running. If it is not, you will need to replace it. Another potential solution is to clean the fan blades. If they are covered in dust or debris, this can also cause the fridge to not cool properly.

Another potential cause of the Kenmore elite refrigerator not cooling error code is a problem with the condenser coils. These coils help remove heat from the fridge and keep it cool. If they are dirty or clogged, it can cause the fridge to not cool properly.

One solution for this problem is to clean the condenser coils. You can do this by unplugging the fridge and removing the coils. Once they are removed, you can use a brush or vacuum to clean them. Another potential solution is to replace the condenser coils if they are damaged.

Kenmore elite refrigerator not cooling and compressor hot?

The problem could be with the compressor, condenser coils, or Freon levels. Check out this quick troubleshooting guide to get your fridge back up and running.

If your Kenmore Elite refrigerator is not cooling and the compressor is hot, there are several possible causes. The problem could be with the compressor, condenser coils, or Freon levels.

If the compressor is the issue, it will need to be replaced. If the condenser coils are dirty, they will need to be cleaned. And if the Freon levels are low, they will need to be refilled.

Here is a quick troubleshooting guide to help you determine which of these issues is causing your fridge to not cool properly.

First, check the compressor. If it is hot to the touch, it may be faulty and will need to be replaced.

Next, check the condenser coils. If they are dirty, they will need to be cleaned with a brush or vacuum cleaner.

Finally, check the Freon levels. If they are low, you will need to contact a professional to refill them.

Kenmore elite refrigerator not cooling or making ice?

Here are some possible causes and solutions.

If your Kenmore Elite refrigerator is not cooling or making ice, it could be due to a variety of issues. Check the following:

  • Ensure that the fridge is set to the correct temperature. The ideal setting for most fridges is between 35-38 degrees Fahrenheit.
  • If the fridge is too full, it might not be able to circulate cold air properly. Try removing some items and see if that helps.
  • Check the condenser coils to see if they’re dirty. If they are, clean them with a brush or vacuum attachment.
  • Inspect the door seals and gaskets to make sure there are no cracks or gaps. If there are, replace them.

How do I put my Kenmore Elite refrigerator in diagnostic mode?

To put your Kenmore Elite refrigerator in diagnostic mode, first locate the diagnostic test button on the control panel. The location of the button may vary depending on your model, but it is usually located near the ice maker. Once you have found the button, press and hold it for five seconds. The display should then show a code that indicates the current status of the refrigerator.

What temperature should I set my Kenmore Elite refrigerator?

This is a question that many people have, and there is no single answer. The ideal temperature for your fridge will depend on several factors, including what type of food you’re storing, how often you open the door, and where it’s located in your home.

In general, most experts recommend setting your fridge between 35 and 38 degrees Fahrenheit. This range will keep your food fresh while preventing bacteria from growing. However, you may need to adjust the temperature slightly depending on your individual circumstances.

What does ER 1f mean on Kenmore Elite refrigerator?

It means that the refrigerator is not cold enough. The “f” stands for “fridge.” Check the temperature setting to make sure it is set properly. If it is, then there may be something wrong with the fridge itself and you should call a repairman.

ER means error, so an ER code on your fridge is definitely not good news. If you see the ER code ERIf, it means that your fridge is not cold enough. The “f” stands for “fridge.” Check the temperature setting to make sure it is set properly. If it is, then there may be something wrong with the fridge itself and you should call a repairman.

How long does it take a Kenmore Elite refrigerator to get cold?

It really depends on how well the refrigerator is insulated and how cold the ambient temperature is. If you have a particularly cold kitchen, it could take up to 24 hours for your fridge to reach its optimal temperature.

Conversely, if your kitchen is quite warm, it could take less time. Generally speaking, though, you should expect it to take around 12 hours for your Kenmore Elite fridge to get cold.

Once it’s reached its optimal temperature, your fridge will work hard to maintain that temperature. This means that even if you open the door frequently, the inside temperature shouldn’t fluctuate too much.

How do you replace the control board on a Kenmore Elite refrigerator?

If your Kenmore Elite refrigerator is not working properly, it may be time to replace the control board. This is a relatively easy repair that you can do yourself.

First, you will need to locate the control board. It is usually located behind the fridge near the bottom. Once you have found it, unplug the refrigerator from the power outlet.

Next, remove the control board by taking out the screws that hold it in place. Once the board is removed, you can then install the new one by following the same process in reverse.

Be sure to test your refrigerator before putting it back into use to ensure that the new control board is working properly. If everything checks out, then you should be good to go!

Where are the coils located on Kenmore Elite refrigerator?

The coils are located on the back of the Kenmore Elite refrigerator. If you have a model that is open at the top, the coils will be located behind the kick plate.

If your model has French doors, the coils will be located behind the drawer at the bottom of the fridge. To access the coils, simply remove the appropriate panel and they will be right there.

If your refrigerator is ice buildup, it’s likely that the coils are not able to dissipate the heat properly and need to be cleaned.

Simply unplug the fridge, remove the panel, and vacuum the coils with a soft brush attachment. Be sure to put the panel back on correctly before plugging the fridge back in.

Related:

Conclusion

If your Kenmore Elite refrigerator is not cooling, there are a few things you can do to try and fix the problem. First, check to see if the fridge is set to the correct temperature. If it is, then you may need to clean the coils or replace the air filter. If neither of these solutions work, then you may need to call a repairman.

We hope this article was helpful in troubleshooting your Kenmore Elite refrigerator. Thank you for reading!