28 Reasons Why Samsung Washer Not Spinning and {How to Fix It}

Last Updated on September 1, 2023 by Kimberly Crawford

If your Samsung washer isn’t spinning, there are a few things you can do to try to fix the problem. In this blog post, we will discuss some of the most common causes of this issue and how to troubleshoot them. We will also provide some tips on how to prevent your Samsung washer from not spinning in the future.

Related: 7 Washing Machine Brands To Avoid and 3 Most Reliable Brands

Samsung Washer Not Spinning: How to Fix It

1. Uneven load.

If your washer isn’t spinning evenly, it could be due to an uneven load.

Check your clothes to make sure they’re not bunched up on one side of the tub.

If they are, redistribute them so that the weight is more evenly balanced.

2. Overloaded.

Washing machines are designed to handle a certain amount of laundry. Overloading the washer can cause problems, including clothes not getting clean or the washer stopping mid-cycle.

If your washer isn’t spinning properly, check to see if it’s overloaded. Try taking some clothes out and running the cycle again.

3. Underloaded.

If your washer is not spinning, it may be underloaded. This means there are too few clothes in the washer. Try adding more clothes and starting the cycle again.

4. Shock Absorbers.

The shock absorbers are an important part of the washer and keep it stable during the spin cycle.

If they are worn out, the washer will vibrate and shake excessively. Inspect them for wear and tear and replace them if necessary.

Why does it fail?

Shock absorbers can fail for a number of reasons. The most common is simply wear and tear from age and use. They can also be damaged by water or rust, which can cause them to leak or break.

How to fix it:

If the shock absorbers are worn out, they will need to be replaced. This is a relatively simple repair that can be done by a qualified technician.

5. Drain pump filter.

The drain pump filter is located on the front of your Samsung washer. To clean it, first remove any clothing or objects from the washer. Next, locate the filter and unscrew it.

Once the filter is removed, you can rinse it off with water and put it back in place. Be sure to screw the filter back on tightly.

Related: My Washing Machine Not Draining: What Should I Do?

6. Drain pump hose.

If the washer doesn’t spin, but you can hear the motor running then it is most likely that the drain pump hose is clogged. The first thing you should do is unplug the washer and take a look at the hose. If it is full of water then you will need to remove the hose and clean it out.

The best way to do this is with a wet/dry vacuum. If the hose is clear then you will need to check for a clog in the drain pump itself.

To do this, you will need to remove the drain pump and inspect it for debris. If you find a clog, then you can simply remove it and the washer should start spinning again.

Related: Washing Machine Water Usage: How Much Does a Washing Machine Use?

7. Faulty Suspension.

If your washer is not spinning, it may be due to a faulty suspension. The suspension on a washing machine helps to keep the tub stable during the spin cycle.

If this part is worn out or damaged, it can cause the washer to shake and vibrate excessively, which can lead to the tub not spinning correctly.

To fix this, you will need to replace the suspension on your washing machine. This is a fairly simple repair that can be done at home with a few tools.

8. Plastic bracket.

The washer will not spin if there is something blocking the spinning tub. One of the most common things that can block the tub is a plastic bracket.

The bracket is located on the bottom of the washer and holds the motor in place. If this bracket breaks, it can cause the washer to become unbalanced and not spin properly.

If your washer is not spinning, check to see if the plastic bracket is in place. If it is not, you will need to replace it. You can find replacement brackets at most hardware stores. Be sure to follow the instructions that come with the bracket carefully so that you do not damage the washer.

To replace the bracket, first remove the screws that hold it in place. Then, remove the old bracket and replace it with the new one. Be sure to tighten the screws securely so that the bracket does not come loose. Finally, test the washer to be sure that it is spinning properly.

9. Drive Belt.

The drive belt is a skinny, black rubber band that goes around the outer edge of the tub. If the washer is not spinning, but you can hear the motor running, then the drive belt may be broken.

To check if the drive belt is broken, open up the washer and look for any signs of damage to the belt. If the belt is damaged, it will need to be replaced.

Replacing the drive belt is a relatively easy repair that can be done at home. All you need is a new drive belt and a Phillips head screwdriver. First, unplug the washer from the power outlet. Then, remove the screws that hold the back panel in place.

Once the back panel is removed, you will be able to see the drive belt. To remove the old drive belt, simply pull it off of the motor pulley and tub. Then, thread the new drive belt around the motor pulley and tub. Make sure that the belt is tight against the pulleys.

10. Lid Switch Assembly.

The lid switch assembly is located near the top of the washer. The lid switch is a safety device that keeps the washer from spinning when the lid is open.

If your washer won’t spin, and you have verified that the wash tub is empty and there are no suds, then the problem may be with the lid switch.

To check the lid switch, first make sure that the washer is in standby mode. The washer will not operate if the lid is open and the wash tub is empty.

With the washer in standby mode, open the lid and look for a small metal tab on the top of the lid switch assembly. This tab should be in the up position. If it is not, then push it up and close the lid. The washer should now operate normally.

If the tab is in the up position and the washer still will not spin, then the problem may be with the lid switch itself.

To test the lid switch, unplug the washer from the power outlet and remove the two wires from the terminals on the lid switch.

Using a multimeter, test for continuity between the two terminals. There should be continuity when the tab is in the up position and no continuity when the tab is in the down position. If you do not get continuity in either position, then the lid switch will need to be replaced.

11. Drum Nut.

If the washer is not spinning, the first thing you should check is the drum nut. The drum nut keeps the inner tub attached to the washing machine.

If it’s loose, the tub can wobble and make noise. To fix this, simply tighten the drum nut with a wrench.

12. Motor Coupling.

The motor coupling is located between the motor and the transmission. Over time, this part can become worn out or damaged, causing the washer not to spin.

Replacing the motor coupling is a fairly simple repair that can be done by most do-it-yourselfers.

To replace the motor coupling:

– Disconnect the washing machine from the power source.

– Remove the back panel of the washer.

– Locate the motor coupling and remove it.

– Replace the motor coupling with a new one.

– Reconnect the back panel and reattach to the power source.

13. Door Latch.

The door latch is a small, plastic piece that fits into the door of your washer. If this piece is broken, the washer will not be able to spin.

To fix this, you will need to replace the door latch with a new one. You can find replacement parts for your Samsung washer at most hardware stores.

To replace the door latch, follow these steps:

– Unplug your washer from the power outlet.

– Remove the screws that hold the door panel in place.

– Lift the door panel off of the washer.

– Locate the door latch and remove it from the door.

– Install the new door latch by snapping it into place.

– Replace the door panel and screw it back into place.

– Plug your washer back into the power outlet and turn it on.

14. Door Lock Motor and Switch Assembly.

The door lock motor and switch assembly is located behind the washer’s control panel. This part is what activates the washer’s spin cycle.

If your washer is not spinning, it is likely that this part has failed.

Why does it fail?

There are a few reasons why the door lock motor and switch assembly might fail. The most common reason is simply wear and tear. over time, the door lock motor and switch assembly can become worn down, making it less effective at activating the washer’s spin cycle.

Another reason why the door lock motor and switch assembly might fail is because of a power surge. If there is a power surge, it can damage the door lock motor and switch assembly, causing it to fail.

How do I fix it?

If the door lock motor and switch assembly has failed, you will need to replace it. This is a relatively easy repair that can be done at home.

To replace this part, you will need to remove the control panel from the washer. This can be done by removing the screws that hold it in place. Once the control panel is removed, you will be able to access the door lock motor and switch assembly.

To install the new door lock motor and switch assembly, you will need to connect it to the wiring harness. Once it is connected, you can then reattach the control panel and screw it back into place.

15. Motor Control Board.

The motor control board regulates the washer’s spin speed by sending voltage to the washer motor. If the motor control board is defective, it may not send enough voltage to the washer motor or it may not send any voltage at all.

Why does it fail?

The most common reason for the motor control board to fail is because of a power surge.

How do I fix it?

If your motor control board has failed, you will need to replace it. You can purchase a replacement motor control board online or at a local appliance parts store.

Replacing the motor control board is a fairly simple repair that can be completed in about an hour. Simply remove the old motor control board and install the new one in its place.

16. Clutch.

The clutch on a Samsung washing machine is what connects the inner tub to the spinning basket. If your washer is not spinning, it could be because the clutch is damaged or worn out.

Why does it fail?

The clutch can fail for a number of reasons, such as overloading the washing machine or using it for too long. It can also be damaged by a foreign object, such as a coin or button, getting caught in the mechanism.

How to fix it:

To replace the clutch, you will need to first remove the washing machine’s cabinet. Once you have access to the clutch, you will need to remove the old one and then install the new one.

Replacing the clutch on a Samsung washing machine is a fairly simple process, but it is important to make sure that you have the correct part before beginning. You can find the correct part by checking your owner’s manual or by contacting Samsung directly.

17. Clutch Band Kit.

The clutch band kit is used to fix a washer that is not spinning. The kit includes the clutch band, spring, and instructions.

The clutch band attaches to the tub and spins the tub when the washer is turned on. The spring helps hold the clutch band in place.

Why does it fail?

The clutch band can fail if the washer is overloaded or if something is caught in the tub. The spring can also fail if the washer is overloaded.

How to fix it:

If your washer is not spinning, you may need to replace the clutch band. The kit is available at most hardware stores.

To replace the clutch band:

– Unplug the washer.

– Remove the clothes from the tub.

– Remove the bolts that hold the tub in place.

– Lift the tub out of the washer.

-Remove the old clutch band and spring.

-Install the new clutch band and spring.

-Replace the bolts that hold the tub in place.

– Plug the washer back in.

Related: How to Drain Water from Washing Machine: The Definitive Guide

18. Drive Pulley.

The drive pulley is located beneath the washer tub. It consists of a metal shaft that extends through the bottom of the washer tub and attaches to the motor. The drive pulley has a rubber ring or tire that helps grip the sides of the wash tub during the spin cycle.

If your Samsung washing machine is not spinning, the drive pulley may be to blame. This part can become worn out or damaged over time, causing the washer to stop spinning. Fortunately, replacing the drive pulley is a relatively easy repair that you can do yourself.

Before beginning this repair, be sure to unplug the washing machine from power and shut off the water supply. Then, remove the washing machine’s cabinet panels to access the drive pulley. Once you have located the drive pulley, use a wrench to remove the nut that secures it to the shaft.

With the old drive pulley removed, simply install the new one in its place and secure it with the nut. Be sure to tighten this nut securely, as a loose pulley can cause the washing machine to vibrate excessively. Finally, reassemble the washing machine cabinet and plug it back in. Your Samsung washer should now be spinning properly!

19. Rotor Assembly.

The rotor is what spins the tub and has paddles or fins attached to it. These paddles help to lift the clothes up as they are being washed and then push the water out.

If your washer is not spinning, it could be because the rotor assembly is damaged or defective.

Why does it fail?

There are a few reasons why the rotor assembly might fail. The most common reason is that the bearings have gone bad. These bearings help to keep the rotor in place and allow it to spin smoothly. Over time, they can wear out and cause the assembly to fail.

Another reason why the rotor assembly might fail is because of something called “seizing.” This is when the rotor becomes stuck and cannot spin. This can be caused by a build-up of dirt or debris on the assembly.

How to fix it:

In this case, you will need to replace it.

You can find the rotor assembly for your model of Samsung washer online or at a local appliance parts store. Be sure to take note of the model number and serial number before you order the part. Once you have the new rotor assembly, follow these instructions to replace it:

First, unplug your washer from the power outlet.

Next, remove the back panel of the washer. This will give you access to the rotor assembly.

Using a wrench, loosen the bolts that hold the rotor assembly in place.

Carefully remove the old rotor assembly and replace it with the new one.

Tighten the bolts to secure it in place.

Finally, replace the back panel and plug your washer back in.

20. Stator Assembly.

The stator assembly is located inside the washer tub, near the bottom. It contains a large metal ring called the stator, which has coils of wire wrapped around it. The stator is what produces the magnetic field that makes the washer spin.

If your Samsung washer is not spinning, it could be because there is something wrong with the stator assembly.

Why does it fail?

The most common reason for the stator assembly to fail is because the coils of wire around the stator become damaged. This can happen if the washer is overloaded, or if there is something caught in the tub that prevents it from spinning properly.

How to fix it?

To check if this is the problem, you will need to open up the washer and take a look at the stator assembly. If it looks damaged or burnt, then it will need to be replaced.

To replace the stator assembly, you will need to:

– Unplug the washer from the power outlet.

– Remove the back panel of the washer.

– Disconnect the wires from the old stator assembly and remove it from the washer.

– Install the new stator assembly and reconnect the wires.

– Replace the back panel and plug the washer back in.

Replacing the stator assembly is not a difficult task, but it is one that should be done by a qualified technician.

If you attempt to do it yourself, you could end up damaging your washer even further. If you need help replacing the stator assembly in your Samsung washer, please contact a qualified appliance repair technician.

21. Bearing.

The washer’s spin basket has a central hub where the tub spins on a large metal cylinder called a “bearing.” The bearing is mounted in the cabinet and cannot be repaired. If your washer is not spinning, it may be due to a problem with the bearing.

If you have a Samsung washer that is not spinning, it is likely due to a problem with the bearing. The bearing is mounted in the cabinet and cannot be repaired. If your washer is not spinning, you will need to replace the entire spin basket.

To replace the spin basket, you will need to:

-Remove the back panel of the washer

-Disconnect the water and power lines

-Lift out the old spin basket

-Install the new spin basket

-Reconnect the water and power lines

-Replace the back panel of the washer

22. Rear Drum with Bearing.

The rear drum is the part of the washer that holds the clothes during the wash cycle. The bearing is what allows the drum to spin freely. If your washer is not spinning, it could be because the bearing has failed.

To check if this is the problem, remove the back panel of your washer and take a look at the rear drum. If you see any damage to the bearing, then that is likely the problem.

To fix this, you will need to replace the rear drum and bearing assembly. This is a relatively easy repair that you can do yourself.

To replace the rear drum and bearing:

-First, remove the back panel of your washer.

-Then, remove the retaining ring that holds the drum in place.

-Next, take out the old drum and bearing assembly.

-Now, install the new rear drum and bearing assembly.

-Finally, replace the back panel and you’re done!

23. Tub Bearing.

The tub bearing is what the washer’s tub rests on. The tub bearing helps to keep the inner tub stable as it spins. This part can wear out over time, causing a thumping noise during spin cycle.

If your washer is making this noise, it’s important to replace the tub bearing. Here’s how:

To access the tub bearing, you’ll need to remove the washer’s back panel. Start by disconnecting the washer from its power source, and then remove the screws that hold the panel in place. With the panel removed, you should be able to see the tub bearing.

The tub bearing is held in place by a retaining ring. Use a flathead screwdriver to remove the retaining ring, and then pull the tub bearing off of the shaft.

To install the new tub bearing, simply reverse these steps. Be sure to line up the flats on the shaft with the slots in the new bearing, and then tighten the retaining ring until it’s snug.

Once you’ve replaced the tub bearing, reassemble the washer and test it out. If the noise is gone, you’ve fixed the problem!

24. Tub Seal and Bearing Kit.

The tub seal and bearing kit helps to keep the water in the washer from leaking out. The kit includes a new tub seal and two bearings.

Why does it fail?

The bearings and seal can wear out over time, causing the washer to leak water.

How do you know it’s failed?

If your washer is leaking water, it is likely that the tub seal and bearing kit has failed.

How to fix it?

You will need:

-Phillips head screwdriver

-Flathead screwdriver

-Socket wrench set

-Pliers

-Hammer

-Pry bar

Instructions:

Before you begin, make sure that you have all of the tools and parts that you will need. Once you have everything, follow these steps to replace the tub seal and bearing kit.

-Using a Phillips head screwdriver, remove the screws from the back panel of the washer.

-Remove the back panel and set it aside.

-Locate the tub seal. It is a ring of rubber that sits between the tub and the back panel.

-Using a flathead screwdriver, pry the old tub seal out.

-Take the new tub seal and place it into position.

-Using a socket wrench, tighten the bolts that hold the tub in place.

-Replace the back panel and screw it into place.

-Locate the bearings. There are two of them, and they sit on either side of the tub.

-Using a hammer, tap on the old bearings until they come loose.

-Remove the old bearings and insert the new ones.

25. Basket Drive.

The drive system that turns the washer’s basket is not working.

If your Samsung washing machine isn’t spinning, there’s a good chance the issue is with the basket drive. This is the system that turns the washer’s basket, and if it’s not working properly, your clothes won’t get clean.

There are a few things you can do to try to fix the problem yourself, but if the basket drive is truly damaged, you’ll need to call a repairman.

First, make sure that the washing machine is properly plugged in and that there’s power going to it. If everything looks good there, take a look at the drive belt. This is a large, looped belt that goes around the washer’s drum. If it’s loose or broken, that could be the problem.

If the drive belt looks fine, then the issue is likely with the basket drive itself. This part is located inside the washing machine and can be tricky to replace. If you’re not comfortable doing it yourself, you’ll need to call a repairman.

To replace the basket drive, you’ll first need to remove the washing machine’s cabinet. There are usually a few screws holding it in place. Once the cabinet is off, you’ll be able to see the basket drive.

Remove the old basket drive and install the new one following the instructions in your owner’s manual. If you don’t have an owner’s manual, you can usually find one online.

With the new basket drive in place, replace the washing machine cabinet and screw it into place. Once everything is back together, plug in the washing machine and give it a test run. If all goes well, your clothes should start getting clean once again.

26. Drive Motor.

The drive motor is located under the washer tub. The drive motor turns the washer tub during the wash and spin cycles. If the washer doesn’t spin, the drive motor might be defective.

Why does it fail?

The drive motor can fail because of a manufacturing defect or because something has caused it to overheat. Overheating can be caused by a bad coupling, a restriction in the air flow, or a problem with the timer.

How do you fix it?

If the drive motor is defective, you’ll need to replace it. If the drive motor is overheating, you’ll need to repair the cause of the overheating. This might involve replacing the coupling, clearing a restriction in the air flow, or replacing the timer.

To access the drive motor:

-Remove the screws from the back of the washer.

-Lift off the top panel of the washer.

-Remove the screws that hold the drive motor in place.

-Pull out the drive motor and disconnect the wires.

27. Transmission.

The transmission is a very important part of your washer. It is what helps the washer rotate the drum and spin the clothes. If your washer is not spinning, it could be because of a problem with the transmission.

Why does it fail?

There are a few reasons why the transmission might fail. One reason could be because of a problem with the motor. Another reason could be because the transmission is overloaded.

How to fix it:

There are a few things that you can do to try to fix this problem yourself. First, you can check to see if there is anything blocking the transmission. Sometimes, dirt or lint can build up and cause the transmission to not work properly. You can also try lubricating the transmission with a little bit of oil.

If you think that the problem is with the motor, you should first try to reset the washer. If that does not work, you may need to replace the motor.

28. Door lock.

The door lock is a safety feature that keeps the washer door closed during operation. If the door lock is defective, the washer will not spin.

Why does it fail?

The door lock can fail due to a power surge, wear and tear, or a manufacturing defect.

How do you fix it?

To determine if the door lock is defective, try to start the washer with the door open. If the washer starts, then the door lock is defective and needs to be replaced. If the washer does not start, then the door lock is not defective.

If the door lock is not working, you will need to replace it. You can purchase a replacement door lock from Samsung or a third-party retailer.

When replacing the door lock, be sure to follow the instructions in the owner’s manual.

Samsung Washer Won’t Complete Spin Cycle?

samsung washer wont complete spin cycle

If your Samsung washer won’t complete a spin cycle, there are several possible causes. The most common cause is that the washer is not level. Check to make sure that your washer is level and adjust accordingly.

Another common cause is that the load is unbalanced. Try redistributing the load and see if that solves the problem.

If those solutions don’t work, then it’s possible that there is something wrong with the washer itself. Check for any error codes that may be displayed on the control panel.

If you’re still having trouble, contact Samsung customer service for assistance. With a little troubleshooting, you should be able to get your washer up and running again in no time.

Samsung washer not spinning fast?

If your Samsung washer is not spinning fast, there are several potential causes. The most common cause is a clogged filter. A clogged filter can cause the washer to spin slowly or not at all.

Another potential cause is a problem with the washing machine’s belt. If the belt is worn or damaged, it can cause the washer to spin slowly. Finally, a problem with the washing machine’s motor can also cause the washer to spin slowly.

If your Samsung washer is not spinning fast, the best thing to do is check the filter first. If the filter is clogged, simply clean it out and see if that fixes the problem. If the filter is not the issue, then check the belt.

If the belt is worn or damaged, it will need to be replaced. Finally, if neither of those solutions fix the problem, then you may have a problem with the washing machine’s motor and will need to call a repairman.

Samsung Washer Won’t Stop Spinning?

samsung washer wont stop spinning

If your Samsung washer won’t stop spinning, there could be a few different reasons why. First, check to make sure that the washer is properly balanced. If it’s not, the spin cycle will continue indefinitely. To fix this, simply redistribute the load evenly in the washer tub.

If the washer is balanced but still won’t stop spinning, there could be an issue with the door lock. The door lock prevents the washer from operating when the door is open, so if it’s not working properly, the washer will continue to spin. To fix this, simply replace the door lock.

Finally, if the washer is balanced and the door lock is working properly, there could be an issue with the timer. If the timer is not advancing, the washer will continue to spin. To fix this, simply replace the timer.

Samsung Washing Machine Not Spinning No Error Code

There could be several reasons why a Samsung washing machine is not spinning and no error code is displayed:

  1. The clutch of the washer could be worn out. If the tub is not rotating at all during a cycle, it indicates that the clutch might need replacement.
  2. The problem can also be due to the load in the machine. Either an over or under-loaded machine can cause it not to spin. Similarly, poor load distribution can contribute to this issue.
  3. A faulty motor could also be the culprit. However, in such cases, an error code is usually displayed.
  4. If the washing machine is neither spinning nor draining, it could be due to a blocked drain pump filter caused by debris.
  5. A Samsung washer may not spin if the drum isn’t balanced. This could be due to a defective component or the load not being distributed evenly.
  6. Another common cause could be a problem with the water supply. If the water supply is insufficient or interrupted, the machine might not spin.
  7. Certain error codes like UE, E4, or Ub can also prevent the spin cycle from working. These codes usually indicate that the washing machine isn’t well balanced.

Detailed troubleshooting steps:

Here are some detailed troubleshooting steps you can take if your Samsung washing machine is not spinning and no error code is being displayed:

  1. Check the Load: Overloading or underloading the washing machine can cause it to stop spinning. Try adjusting the size of your load to see if this resolves the issue. Similarly, unevenly distributed loads can also cause problems, so try to evenly distribute your laundry in the drum.
  2. Inspect the Clutch: If your washer’s tub isn’t rotating at all during a cycle, the clutch could be worn out and might need replacement. This task requires technical expertise and it’s recommended to hire a professional for this.
  3. Examine the Motor: While a faulty motor usually triggers an error code, it could still be worth checking if the motor is functioning properly. Again, this is a task best left to a professional.
  4. Check the Drain Pump Filter: If your washing machine isn’t spinning or draining, the drain pump filter could be blocked by debris. Refer to your user manual on how to clean the filter. It usually involves removing a cover at the lower front of the machine and manually cleaning the filter.
  5. Balance the Drum: If the drum isn’t balanced, your washer may not spin. Check if there are any defective components causing the imbalance. If the load isn’t distributed evenly, try to rearrange the laundry inside the drum.
  6. Water Supply: Inspect the water supply to the machine. If the supply is insufficient or interrupted, the machine might not spin. Ensure that the water supply valves are fully opened and the hoses are not kinked or damaged.
  7. Reset the Machine: Sometimes, simply unplugging the machine for a few minutes and then plugging it back in can reset the system and solve the issue.

Samsung washer not spinning clothes dry?

There are several possible causes and solutions to this problem. One possible cause is that the washer is not properly leveled. To fix this, simply adjust the leveling feet until the washer is level.

Another possible cause is that the lid switch is faulty. To fix this, replace the lid switch with a new one.

If your Samsung washer is still not spinning clothes dry, there are a few other things you can try. One is to clean the lint filter. Another is to check the drive belt and pulley for damage. Finally, you can contact Samsung customer service for further assistance.

Samsung Washer Won’t Spin With Heavy Load?

Here are some possible causes and solutions.

-If your washer is overloaded, it may not be able to spin. Try removing some clothes from the washer and redistributing them evenly.

-If your washer is unbalanced, it may also not be able to spin properly. redistribute the load and make sure nothing is blocking the washer from spinning.

-If your washer is not draining properly, it may also not be able to spin. Make sure the drain hose is not kinked and there is nothing blocking the drain.

Samsung washer not spinning water out of clothes?

samsung washer not spinning water out of clothes

There are a few possible causes for this problem. One is that the washer’s spin cycle may be set too low. Another possibility is that the washer’s load size is too small or there isn’t enough water in the wash tub. Lastly, something may be blocking the washer’s drainage hose or pump.

If your Samsung washer isn’t spinning water out of clothes, try these solutions:

– Check the spin cycle settings and make sure it’s set to a high enough speed.

– Make sure the load size is appropriate for the amount of laundry you’re trying to wash.

– Add more water to the wash tub if necessary.

– Clear any blockages from the washer’s drainage hose or pump.

Samsung washer not spinning on spin cycle?

If your Samsung washer is not spinning on the spin cycle, it could be due to a number of reasons. Here are some possible causes and solutions:

-The washer may be overloaded. Try redistributing the load evenly and restarting the cycle.

-There may be something blocking the washer from spinning. Check to make sure there is nothing caught in the washing tub or in the door seal.

-The washer may be unlevel. Make sure the washer is level and restart the cycle.

-A fuse may have blown or a circuit breaker may have tripped. Check your home’s fuse box and reset any blown fuses or tripped circuit breakers.

-The washer’s motor may be damaged. If the washer is still under warranty, contact Samsung for service. If the washer is not under warranty, you will need to have the motor replaced by a qualified technician.

Samsung front load washer not spinning fast enough?

If your Samsung front load washer is not spinning fast enough, there could be a few different reasons why. First, make sure that nothing is blocking the washer’s spin basket or tub.

If any clothes or other items are obstructing the spinning mechanism, this could be causing the issue.

Additionally, check to see if the washer’s spin cycle is set to the correct speed. If it is set too low, this could also be contributing to the problem.

There are a few different solutions you can try if your Samsung front load washer is not spinning fast enough.

First, you can try running the washer on a higher spin cycle setting. If this does not work, you may need to clean the washer’s filters or other components.

Additionally, if the issue persists, you may need to contact a Samsung customer service representative for assistance.

Related:

Conclusion

After following the above steps, your Samsung washer should be spinning again. If it is not, then there may be a more serious issue that needs to be addressed by a professional. In either case, it is always best to consult with a washing machine repair specialist to ensure that your washer is repaired properly and safely.