How to Fix a Maytag Washer That Won’t Start

Last Updated on August 23, 2022 by Kimberly Crawford

If your Maytag washer won’t start, you’re not alone. This is a common problem that can be caused by a variety of issues.

In this blog post, we will discuss some of the most common causes of this problem and how to fix them. We will also provide some tips on how to prevent your washer from experiencing this issue in the future.

In this article

How to Fix a Maytag Washer That Won’t Start

1. Timer.

There are a few things that could be causing your Maytag washer to not start. One possibility is that the timer is not set correctly. If the timer is not set, the washer will not start.

How to fix it?

To fix this, you will need to set the timer. First, locate the timer knob on the control panel. Then, turn the knob to the correct time. Once the timer is set, your washer should start.

2. User Control and Display Board.

The user control and display board is the control panel for your washer. It includes an electronic control panel with LED lights that tell you what cycle the washer is in, how much time is left, and other important information.

The display board also houses the buttons that allow you to select the wash cycle, start or pause the washer, and add fabric softener.

If your washer won’t start, the first thing you should check is the user control and display board. Make sure that the power cord is plugged into an outlet and that the wash cycle has been properly selected.

If the display board lights are not lit, there may be a problem with the electrical supply to the washer. If the lights are lit but the washer still won’t start, the problem may be with the control board itself.

There are a few things you can do to troubleshoot a problem with the user control and display board. First, check all of the connections to make sure they are secure. Next, try resetting the circuit breaker or replacing the fuse. If the problem persists, you may need to replace the control board.

Why does it fail?

The most common reason for the user control and display board to fail is because of a power surge. A power surge can damage the electronic components on the board and cause it to malfunction. If you live in an area with frequent power surges, you may want to invest in a surge protector for your washer.

How to fix it?

If the user control and display board is damaged, it will need to be replaced. You can purchase a replacement board from the manufacturer or an authorized appliance parts dealer. Be sure to disconnect the power to the washer before you begin any repairs.

How to prevent it?

There are a few things you can do to help prevent the user control and display board from being damaged by a power surge.

First, make sure the washer is plugged into a surge protector. You should also regularly check the connections to ensure they are tight and secure. Finally, if you live in an area with frequent power surges, consider investing in a whole house surge protector.

3. Blown Line Fuse.

This fuse is located in the power cord and it may be blown if there is an electrical surge.

Why does it fail?

A power surge can cause the line fuse to fail. A power outage can also cause it to fail. If you live in an area with a lot of thunderstorms, the line fuse may fail more often.

How do I know if it’s blown?

If the line fuse is blown, the washer will not start. You may also see a “F” on the display.

How do I replace it?

To replace the line fuse, you’ll need to unscrew the back panel of the washer. Once you’ve done that, you can access the line fuse and replace it with a new one. Make sure to screw the back panel back on tightly so that the washer is properly sealed.

How do I prevent it from happening again?

There’s not much you can do to prevent the line fuse from failing. However, you can try to avoid power surges by using a surge protector. If you live in an area with a lot of thunderstorms, you may want to consider investing in a backup generator.

4. Lid switch.

About this part: The lid switch is a safety device that keeps the washer from operating when the lid is open. If your washer won’t start, the lid switch may be the problem.

Why does it fail?

Lid switches fail for a variety of reasons. The most common is simply wear and tear. Over time, the switch can become less sensitive, making it more likely to fail.

Other causes include dirt, rust, or other debris build-up in the switch itself or in the surrounding area. This can prevent the switch from moving properly, causing it to fail.

To check the lid switch:

With the lid open, look for a small button or lever on the side of the washer near where the lid closes.
Press the button or lever. If it doesn’t click, the switch may be defective.
If the switch is defective, you’ll need to replace it. Check your owner’s manual for instructions on how to do this.

How do you fix it?

If your washer’s lid switch is the problem, there are a few things you can try to fix it.

The easiest is to simply clean the switch and surrounding area. This will remove any dirt or debris that may be causing the problem.

If cleaning doesn’t work, you may need to replace the lid switch. This is a relatively easy repair that you can do yourself.

How to prevent it?

There are a few things you can do to prevent your lid switch from failing.

First, be sure to keep the area around the switch clean. This will help prevent build-up of dirt and debris.

Second, if your washer is starting to act like the lid switch is going bad, replace it before it fails completely. This will save you from having to do a more difficult repair later.

5. Main Control Board.

About this part: The main control board manages the washer’s functions such as filling, washing, draining and spinning.

If your washer won’t start, the first thing to check is the main control board. It’s possible that a faulty control board could be causing your washer to malfunction.

Why does it fail?

Over time, the components on the main control board can break down and stop working properly. This can cause your washer to fill slowly, not spin or drain properly, or not start at all.

How to fix it:

You’ll need to replace the main control board. We recommend calling a qualified technician to do this for you. Trying to fix it yourself could void your warranty.

How to prevent it?

You can help prevent the main control board from failing by regularly cleaning your washer and making sure that the water supply lines are not clogged. You should also avoid overloading your washer, as this can put too much strain on the machine and cause it to break down.

6. Thermal Fuse.

The thermal fuse is a safety device that trips if the washer overheats. This part is located on the back of the washer, near the bottom.

Why does it fail?

A failed thermal fuse can cause the washer to not start.

How do you fix it?

To replace the thermal fuse, first unplug the washer. Then remove the back panel of the washer. Locate the thermal fuse and disconnect the wires from it.

Remove the old thermal fuse and install a new one in its place. Reconnect the wires and replace the back panel. Plug in the washer and start a cycle to test it.

How to prevent it?

You can prevent the thermal fuse from failing by making sure that the washer does not overheat. If your washer is overheating, check the water supply and make sure that it is turned on all the way.

You should also check the inlet hoses to see if they are kinked or clogged. If you have a front-loading washer, make sure that the door seal is clean and free of debris. Finally, you should clean the lint filter after every load of laundry.

7. Incoming Power Problem.

Make sure that your circuit breaker is turned on and that there is no power outage in your area.

If there is power coming into your home, the next thing you should check is the power cord to your washer. Make sure that it is plugged in securely and that there are no frayed wires.

8. Door Lock.

The door lock is a pretty simple device. It’s basically a switch that tells the washer whether the door is open or closed. If the door lock is defective, the washer won’t start.

Why does it fail?

Door locks can fail either mechanically or electrically. A mechanical failure is usually caused by a broken door lock switch. An electrical failure is usually caused by a problem with the door lock solenoid.

What are the symptoms?

If the door lock is defective, the washer will usually make a clicking noise when you try to start it. The washer may also make a buzzing noise.

To test the door lock, unplug the washer and remove the front panel. With the front panel off, you should be able to see the door lock. Apply power to the washer and check for continuity between the two terminals on the door lock. If there is no continuity, replace the door lock.

How do you fix it?

If the door lock is defective, you’ll need to replace it. Replacing the door lock is a pretty simple repair that most people can do themselves. You can find replacement door locks at most hardware stores or online retailers.

How to prevent it?

There’s not really much you can do to prevent door lock failures. Door locks are pretty simple devices and don’t require any maintenance.

9. Contact Pads On User Interface.

The contact pads on the user interface can become corroded or damaged over time. This can cause the washer to not start. You can clean the contact pads with a mild soap and water solution.

Why does it fail?

There are several reasons why the contact pads on the user interface can fail. The most common reason is corrosion. Corrosion can occur when the washer is not used for a long period of time.

This can cause the contact pads to become damaged and eventually fail. Another reason why the contact pads can fail is due to damage. Damage can occur from excessive use or from a manufacturing defect.

How to fix it?

If the contact pads on the user interface have failed, you will need to replace them. You can purchase replacement contact pads from most appliance stores.

Be sure to match the correct model number to ensure that you get the right part. Once you have the replacement contact pads, simply remove the old ones and install the new ones.

How to prevent it?

There are several things that you can do to prevent the contact pads on the user interface from failing.

First, be sure to use the washer regularly. This will help to prevent corrosion.

Second, be careful when using the washer. Avoid excessive use or abuse.

Third, make sure that the washer is properly installed. Follow all manufacturer instructions.

Fourth, keep the washer clean. Wipe up any spilled detergent or water immediately.

Fifth, inspect the contact pads regularly. Look for signs of corrosion or damage. If you see any problems, replace the contact pads as soon as possible.

Related:

Maytag front load washer turns on but won’t start.

There are several possible causes for a Maytag front load washer to turn on but not start. The most common cause is that the washing machine is not properly plugged into an outlet. Other possible causes include a tripped circuit breaker or blown fuse, incorrect settings, or a faulty door switch.

If your Maytag front load washer turns on but won’t start, check the following:

Make sure the washer is properly plugged into an outlet.
Check the circuit breaker or fuse box and reset or replace any blown fuses.
Ensure that the door is closed tightly and that the door switch is working properly.
Make sure that the settings are correct for the load size and type.

Maytag washer won’t start after power outage?

A power outage can cause your Maytag washer to stop working. The most common reason for this is because the power outage has caused a power surge. A power surge can damage the electrical components in your washer, causing it to malfunction.

If your Maytag washer won’t start after a power outage, there are a few things you can try before calling a repairman.

First, check to make sure that the power cord is plugged into an outlet. If it is, unplug it and plug it back in. This will reset the washer’s electrical components.

Next, check the circuit breaker. If the circuit breaker has tripped, reset it and try to turn on the washer again.

Maytag washer won’t let me select cycle?

First, check to see if the washer is inpause mode. To do this, open the lid and press the start/pause button. If the washer is in pause mode, the display will read “PAUSE.” Pressing the start/pause button again should resume your cycle. If your washer is not in pause mode, continue reading.

There are a few reasons why your Maytag washer might not let you select a cycle. One reason could be that the washer is not plugged into an outlet.

Another reason could be that the power cord is not properly connected to the back of the washer. If neither of these is the case, then it is likely that there is a problem with the washer’s control panel.

If your washer is plugged into an outlet and the power cord is properly connected, but you are still having trouble selecting a cycle, unplug the washer from the outlet. Wait for 30 seconds, and then plug the washer back in. Press and hold the start/pause button for five seconds. This should reset the washer’s control panel. Try selecting a cycle again. If the problem persists, call a Maytag service technician for assistance.

Maytag washer touch screen not working.

There are several possible causes for a Maytag washer touch screen not working. It could be due to a power outage, a problem with the wiring, or a blown fuse. If the touch screen is not responding to touches, it might need to be reset. To do this, unplug the washer for five minutes and then plug it back in. If the touch screen still does not work, it might need to be replaced.

If you are having problems with your Maytag washer touch screen, there are a few things you can try before calling a repairman. First, check to see if there is a power outage in your area.

If there is, wait until the power comes back on before using your washer. If the touch screen still does not work, try resetting it by unplugging the washer for five minutes and then plugging it back in. If that does not work, you might need to replace the touch screen.

Maytag washer won’t start just clicks.

There are a few things that could be causing your Maytag washer to click but not start. It could be an issue with the power supply, the washing machine itself, or something in between.

If you’re experiencing this problem, here are a few potential causes and solutions to try:

-Check the power supply: Make sure that your washing machine is plugged into a working outlet and that the circuit breaker hasn’t been tripped.

-Inspect the washer: Take a look at your washing machine to see if anything appears to be loose, damaged, or out of place. If you see anything that could be causing the problem, try to fix it or contact a professional for help.

-Check for obstructions: Sometimes, something as simple as a sock or piece of clothing can get caught in the washing machine and prevent it from starting. Make sure there’s nothing blocking the washer’s door or preventing it from getting power.

Maytag washer won’t start just beeps.

The beep sound could indicate a number of things. It could be that the washer is not plugged in, the door is not closed, or there is something blocking the door from closing. If the washer is plugged in and the door is closed, then the beep sound could indicate that the water supply is not turned on.

There are a few things that could be causing your Maytag washer to just beep and not start. Here are a few possible causes and solutions:

-The door could be open or unlocked. Make sure the door is closed tightly and locked before starting the cycle.

-There may be something blocking the washer from starting. Check for any clothing or other items that may be blocking the door from closing properly.

-The washer may not be receiving power. Make sure the washer is plugged in and the circuit breaker is turned on.

Maytag washer won’t start just hums.

There are a few things that could be causing your Maytag washer to hum but not start. It could be an issue with the washing machine’s motor, or there may be something blocking the spinning blades. In either case, troubleshooting the problem will help you get your washer up and running again.

If your washer’s motor is the issue, you may be able to fix it by resetting the motor. To do this, unplug the washer from its power source and then plug it back in. If that doesn’t work, you may need to replace the motor.

If there’s something blocking the spinning blades, you’ll need to remove it before your washer will start. Check the washing machine’s drum for any foreign objects, and be sure to empty the lint trap if it’s full. Once you’ve removed the obstruction, your washer should start up normally.

Maytag washer won’t start the spin cycle.

There are a few things that could be causing your Maytag washer to not start the spin cycle. It could be something as simple as a power issue or it could be something more serious like a problem with the washing machine’s motor.

If you’re having this problem, there are a few things you can try to get your washer up and running again.

First, make sure that the washer is plugged in and that there is power to the outlet. If the outlet is working but the washer still won’t start, try resetting the circuit breaker.

If you’ve checked the power and everything seems to be working properly, take a look at the washing machine’s lid switch. This switch is what tells the washer to start the spin cycle. If it’s not working properly, it could be preventing your washer from starting.

If you’re still having trouble, it’s possible that there is an issue with the washing machine’s motor. If this is the case, you’ll need to call a repairman to take a look at it.

Maytag washer won’t start wash cycle.

There are several possible reasons why your Maytag washer won’t start the wash cycle. It could be something as simple as a power issue or a clogged hose. Or, it could be something more serious, like a problem with the washing machine’s motor.

If your washer won’t start, here are some things to check:

Make sure the washer is plugged in and that the outlet has power.
Check the circuit breaker or fuse box. If a circuit breaker trips or a fuse blows, it could be the reason your washer won’t start.
Check for clogged hoses. A clogged hose can prevent water from reaching the washer.
Check the washing machine’s door. Make sure it’s closed tightly and that there’s nothing blocking it from closing.
If you have an front-loading washer, check the door lock switch to make sure it’s in the “Lock” position.
Check for errors codes on the display. Some error codes can indicate why the washer won’t start.

Maytag top load washer locked and won’t open?

The washer won’t start a new cycle until the door is closed.

If your Maytag top load washer locked and won’t open, there are a few possible causes. To troubleshoot, try these solutions:

-Check the power cord to make sure it’s plugged into a working outlet. -Check the washing machine’s door to make sure it’s closed properly.

-If the washer is in a cycle, wait for it to finish before trying to open the door.

-Press and hold the Start/Pause button for three seconds. This should cancel the current cycle and allow you to open the door.

Is there a reset button on a Maytag washing machine?

There is a reset button on the control panel of your Maytag washing machine. This button is usually located near the power button or on the control panel itself. To reset your washing machine, simply press and hold this button for three to five seconds. You may need to consult your owner’s manual for specific instructions on how to do this.

How do you run a diagnostic test on a Maytag washer?

There are two ways that you can run a diagnostic test on your Maytag washer. The first way is to use the control panel on the washer itself. The second way is to use a special diagnostic tool that can be purchased from most appliance stores.

To use the control panel, simply press and hold the “Pause/Cancel” button for three seconds. This will put the washer into diagnostic mode. Once in diagnostic mode, you can use the buttons on the control panel to cycle through the different tests that are available.

To use a diagnostic tool, you will need to connect it to the washer’s electrical outlet. Once connected, simply follow the instructions that come with the tool. In most cases, you will need to press a button on the tool in order to start the diagnostic test.

Once the diagnostic test is complete, you will be able to see any error codes that are displayed on the control panel. These codes can be used to troubleshoot any problems that you may be having with your washer. If you cannot find the code that you are looking for, you can always contact a Maytag customer service representative for assistance.

Why is my Maytag washer stuck on sensing?

There are a few reasons why your Maytag washer might be stuck on sensing. The first reason could be that there is something blocking the sensors. The second reason could be that the sensors are dirty and need to be cleaned. The third reason could be that the sensors are not working properly.

How do you reset the lid lock on a Maytag washer?

If your Maytag washer won’t start, the lid lock may be the problem. Here’s how to reset it:

First, unplug the washer from the power outlet. Then, open the washer door and remove any clothing or laundry from inside. Next, locate the lid lock switch on the side of the washer tub. The switch will have a small button or lever on it.

Press and hold the button or lever for five seconds. This will reset the lid lock. Finally, plug the washer back into the power outlet and close the door. Your Maytag washer should now be operational.

Conclusion

In conclusion, if your Maytag washer won’t start, there are a few things you can check. First, make sure that the washer is plugged in and that the outlet is working. Next, check the water supply to ensure that there is enough water pressure.

Finally, check the washer’s door to make sure it is closed properly. If you have checked all of these things and the washer still won’t start, then you may need to call a Maytag repair service.

Thanks for reading! We hope this helps! Have a great day!

How to Fix a Maytag Washer That Won’t Start